How to clean the products of silver, how to clean the silver

The cleaning method of silver is relatively simple, if the oxidation of the silver surface is not very serious, you can use a silver cloth to clean it.

A few suggestions for maintenance:

Do not wear other *** jewelry at the same time when wearing 925 sterling silver jewelry, so as to avoid collision, deformation or abrasion.

Avoid 925 sterling silver jewelry from contact with water vapor and chemicals, and avoid wearing it for swimming, especially when going to the sea.

After wearing 925 sterling silver jewelry every day, wipe it clean with a cotton cloth and put it in a jewelry box or bag to seal and preserve.

925 sterling silver jewelry has been oxidized and blackened, you can use a soft brush dipped in toothpaste to scrub it: you can also use hand soap or detergent to clean: you can't handle it before scrubbing it with silver water: after washing, 925 sterling silver jewelry should be dried with a cotton cloth.

Hello, Hengshui Baijin Rubber Company provides you with several ways to clean silver products:

1. Soak with Coca-Cola, and the soaking time is 12 hours;

2. Adopt the method of applying lipstick to the cloth, then wiping the silverware, and finally rinsing with water;

3. Use 1000 ml of 50C warm water, 200 ml of phosphoric acid, 30 grams of concentrated laundry detergent, pour the liquid into the ultrasonic cleaning tank and wash for 100 seconds, and then rinse with water;

4. Home cleaning: pour the cleaning solution into a container, soak the silver jewelry for 10 minutes, then wash it with a toothbrush, and then rinse it with water for 10 minutes;

5. Use overnight tea soaking;

6. Use the correction liquid to apply to the silver jewelry, and wipe the silver jewelry with a cloth before the correction liquid is not dry;

7. Use a lighter to burn black silver jewelry; Note: This method is limited to plain silver only.

8. Silver jewelry of plain silver is often blackened, although it can be cleaned frequently, but it is also very troublesome. I teach you to prepare a bottle of clear nail polish before cleaning your silver jewelry, blow dry it with a hair dryer after cleaning, and then apply a layer of nail polish to the clean silver jewelry.

How to clean silver jewelry from the material of silver jewelry:

1. If it is plain silver, that is, silver jewelry without electroplated white gold on the surface is easy to oxidize to black and gray. Soak the silver jewelry in white vinegar for 48 hours, which can remove the faint black oxide, and then rinse it with water and brush the silver jewelry with toothpaste, which can completely remove the black oxide.

2. Long-term wear of silver jewelry, especially electroplating, etc., needs to be placed for up to 1 month"Omamori Salt"Soak in a solution mixed with water for 24 hours. Omamori salt is a salt with a high mineral content produced in Japan, which can eliminate dead skin tissue in a short time without causing discoloration of silver jewelry, and sometimes it is used to purify jade and crystal jewelry. 3. The primary color, polished surface, the easiest, you can go to the jewelry store and let the master polish with a cloth wheel.

After polishing the cloth wheel, wipe it with a silver cloth. If there are gaps on the surface of the non-polishing surface, you can clean it with silver washing water, and don't use too much silver washing water at a time, it is best to wipe it repeatedly, and using too much will reduce the weight of the silver.

4. If the surface has been electroplated, it is best to wipe it with a soft cloth, preferably a high-end jewelry cloth such as gooseskin cloth, because the electroplating layer is very thin, and the wiping of the rough cloth and the damage of chemical substances will affect the brightness of the surface. Once not as bright as it turned out. Soak the silver jewelry in white vinegar for 48 hours, which can remove the faint black oxide, and then rinse it with water and brush the silver jewelry with toothpaste, which can completely remove the black oxide.

Note: No matter what kind of jewelry is made, it is best for friends to take a bath and store it in a dry place when sleeping. Sterling silver is a metal that is highly discolorable, and this is especially true of course.

There are several ways to clean silver:1. If the silver is blackened due to oxidation, you can prepare a clean piece of alcohol or ammonia to scrub and react with the black oxide, which is relatively mild.

2. It can be soaked in cola, because the ingredient of cola is carbonic acid, which is more suitable for silver with many lines.

3. Use a waste toothbrush to dip a small amount of toothpaste, and repeatedly scrub it in the black and black place until the surface of the silver jewelry is as smooth as new, and then wash it with water after scrubbing. This method is very effective for cleaning collars and flowerless bracelets, but it is not recommended to use it if it is used to clean carved or openwork silver jewelry because the effect is not very good.

4. You can buy a special silver paper to wipe it.

5. You can go to the chemical store to buy a bottle of silver washing water, soak the silver in the silver washing water for 2 seconds, and rinse it off.

Toothpaste: We apply this toothpaste to this silver piece of jewelry, and then take out a toothbrush and brush this jewelry like this. This toothpaste contains scrubs and this brightener, which can effectively clean this jewelry, so that the jewelry instantly restores its luster, and after brushing, we can rinse it several times with water, let's see if this silver is now new.

Use alcohol or ammonia: In fact, you can also use alcohol or ammonia to scrub silverware after it is blackened. However, these two materials are generally not prepared at home, so if these two materials are not available at home, you can use some other methods, such as overnight tea, which is also very useful.

Soak with Coke: We pour a little bit of Coke that we drink every day, put it in to soak, this is more suitable for those silver bracelets that are not very easy to brush, outline patterns, etc., and if you can't brush it, you can use this method, soak it for a period of time, and then clean it.

Use alkaline laundry detergent or alkaline noodles: After adding an appropriate amount of alkaline laundry detergent or alkaline noodles to a container, add an appropriate amount of water, wait for the laundry detergent or alkaline noodles to melt completely, and then put the silverware into the container to soak. After about half an hour, the silverware can be removed, and then wiped clean with a cotton cloth to turn white.

Use a professional silver polishing cloth: Buy professional silver polishing paper to wipe it. What is professional silver polishing paper, it is a special professional cloth, and then there will be silver powder on it, so that it can be wiped clean.

Silverware is indeed easy to blacken after wearing it for a long time, so you must put some thought into cleaning and maintenance. The above cleaning methods are useful for silverware, have you lived?

You can wash silver with silver washing water; Toothpaste; vinegar; Coke; phosphoric acid solution and other methods to clean. 1. The principle of washing silver water is bound to be chemical corrosion, and its main component is nitrate, if in the process of washing silver water, you must remember to wear gloves, use tweezers and tools, and control the time, after using silver washing water, rinse and cool down with clean water. 2. Choose green or blue transparent toothpaste for toothpaste, because the particles of this type of toothpaste are more delicate, and during the wiping process, wipe evenly with a soft cloth and do not use too much force.

3. The acetic acid contained in vinegar vinegar is a convenient and practical cleaning substance, only need to use heated vinegar to wipe the silverware, and the stains and dirt attached to it will be removed at once, and the silver products will be naturally bright as new. 4. Coke contains a large amount of carbonic acid, so that the silver can be soaked in Coke for more than 12 hours, and it can also restore its original luster. 5. When the phosphoric acid solution is oxidized, it is light brown, moisten the surface with the phosphoric acid solution, and then wipe it with a flannel cloth to make the silver cleaner brighter.

1.If the silver is blackened by oxidation, it can be washed with ammonia or something with an acidic substance, and it can be changed back to its original appearance after washing.

2.It can be soaked in cola, because the composition of cola is carbonic acid, and this method is more suitable for silver with many lines.

3.You can use toothpaste to gently scrub, scrub back and forth a few more times, and then rinse with water, and the color will turn white and cool. You can buy a special silver paper to wipe it, you can go to the chemical store to buy a bottle of silver washing water, and then rinse it off.

1. Toothpaste: The easiest way is to scrub the surface of the silver with toothpaste, which can be brushed like brushing teeth, and the toothbrush is used to dip the toothpaste and lightly brush the surface of the silver.

2. Coke: You can soak the blackened silver in Coke for a long time, and then wash it properly.

3. Tea: Prepare a little overnight thickness, keep the tea leaves, soak the silver, and then scrub it with the tea leaves a few times to make the silver white.

4. Silver polishing cloth: Silver polishing cloth can easily polish silver jewelry, but only silver jewelry with a certain hardness and smoothness.

5. Silver cleaning solution: If it is a soft necklace or carved jewelry with hollows, it is best to soak it in silver cleaning solution.

The best way to maintain silver jewelry is to wear it every day, because the body's oil will give the silver a warm and natural luster (although there are some exceptions, some people's sweat itself contains ingredients that make silver black). It is best to put it away when it is not usually worn, and it is best to pack it in an airtight bag to prevent the surface of the silver jewelry from oxidizing and blackening in contact with the air. When wearing, wipe the surface of the silver jewelry with a soft cloth every day to maintain the shine.

Silver jewelry will turn black to affect the appearance, if you feel that silver jewelry is too troublesome to clean, you may wish to buy jewelry that will not turn black from the beginning, such as platinum, the nature of platinum is very stable, no matter how long you wear it, it will not turn black, and it will always be as white as new.

100ml of water, put in 2g of baking soda, melt and put in silver, gently shake for two minutes to rinse.

1. Silver washing water: first soak the silver or silver jewelry in the silver washing water, pay attention to the time must not be too long, the corrosion ability of the silver washing water is very strong, and the general oxidized silver necklace is enough to soak for one minute, but do not use the silver washing water frequently, it is not good for the color of the necklace and the human body.

2. Coke: You can use the usual Coke, put the oxidized silver necklace into it and soak it, the time is about 12 hours, take out the necklace after soaking, wash it with water, wipe it dry and it will be as white as new.

3. Sour vinegar: Use a small towel, dipped in seasoned sour vinegar, wipe the oxidized silver necklace, scrub back and forth, and slowly the oxidized color will disappear, leaving the sparkling silver necklace.

5. Wipe the silver cloth: both cheap and effective special silver cloth, generally buy a silver necklace with a silver cloth, or go to the place where silver jewelry is sold to buy a back, with the silver cloth to wipe the oxidized silver necklace, it will soon become shiny again.

6. Toothpaste: Squeeze the toothpaste for daily brushing onto the soft toothbrush, brush the oxidized silver necklace back and forth, pay attention not to get wet when brushing, and do not put it on the faucet to rinse while brushing.