What do I need to pay attention to when building a computer?

Start by determining your budget and needs. How much to buy and what to do with.

Then decide if it's an AMD platform or an Intel platform.

After choosing a platform, the first thing to consider is what CPU to buy, whether you need to turn on the cores (only AMD can turn on the cores) and overclocking.

Different CPUs correspond to different motherboards.

Once you've decided on the CPU and motherboard, it's time to buy a graphics card.

If you play a lot of big games, you have to buy a better graphics card, and now ATI graphics cards and NVIDA graphics cards are good.

A card is recommended for less than 1,000 yuan, and A card and N card for more than 1,000 yuan are acceptable.

Memory can be purchased casually, and if you don't overclock, Kingston's DDR3 1333 is enough.

The memory capacity is 2G or 4G. If you want to overclock, choose DDR3 1600 or higher memory.

The hard disk depends on how much capacity you want, and if you want a large capacity, buy 1T or more.

For general users, it is enough to use traditional mechanical hard disks.

The latest production of Western Digital 500G blue disk or Seagate 12th generation 500G can be used.

The average person can buy a case of about 200-300.

The power supply depends on the power consumption of your whole machine, buy a brand power supply with enough rated power of active PFC, and it is best to pass the 80PLUS certification.

A display of about 1000 yuan of brand liquid display is enough, 19 inches, 22 inches wide screen is the mainstream.

If you have a deep knowledge of installation, go to the installation forum to see and learn.

I didn't pay much attention when I bought the computer, and then I found out that the graphics card was fooled, so it's better for you to buy a computer with a friend who understands computers, and it's a big deal to invite him to dinner.

If you want to build a suitable computer, then you need to pay attention to the three aspects of use, configuration, and business. First of all, before you get a computer, you need to make sure that your computer is used for gaming or business. If it's used to play games, then you should try to choose a high-profile one, and if it's just an ordinary job, then just choose a general one.

The configuration should be reasonable, and it is not possible to use a big cow to pull a small car or a small cow to pull a large car. Finally, it is necessary to choose a reliable business, if his reputation is better, then it will not be easy to be pitted.

One. Uses:

The purpose of the computer is different,The configuration required is also completely different,If you need to play those 3A masterpieces,Then your configuration must be as high as possible。 Because the higher your configuration, the smoother and better the experience will be for you to play. If you're just using it for work and need to open a document or something, then you only need a regular computer, and you're fine.

Because it is basically not necessary to open a document and the like.

Two. The configuration is reasonable

The configuration inside the computer should also be reasonable, and the most important thing is the CPU and graphics card and the motherboard. If you choose a bad CPU but choose a very good graphics card, then you still won't have a good experience. On the other hand, if you have a good CPU, but your graphics card is poor, you won't be able to play games smoothly either.

The CPU and graphics card should be about the same, so that there will be a better experience and be able to give full play to its maximum performance.

Three. Reliable merchants

In the end, you also need to find a reliable merchant, some of which will sell you some parallel goods. Try to find some friends who recommend and think it is very good to buy. In this way, you will be able to buy reliable things and be able to assemble the effect you want.

After reading it, remember to like + follow + **.

1. The most important compatibility is the CPU and motherboard. Both Intel and AMD CPUs can only be used on their own platforms, and the only motherboards that can be compatible with both CPUs are also close to extinction, and the supported CPUs are also relatively old, and basically will not be used in installations.

2. In addition, the CPU socket should also be noted that AMD's pins are on the CPU, Intel's pins are on the motherboard, and the number of pins and jacks must be the same before they can be installed and used. Some motherboards have an integrated CPU on them, so users don't need to worry about compatibility, but these motherboards generally have lower performance and are not very popular with DIY users.

3. The heatsink also needs to distinguish between AMD and Intel, some heatsinks can take into account two CPUs, and some heatsinks can only be connected to one CPU, and there may be specific product compatibility for different models of CPUs, so you should also see clearly when choosing.

4. The memory module is first divided into desktop memory and notebook memory, which are different in size and slot length and are not interchangeable. Memory is mainly divided into DDR1, DDR2, DDR3 and DDR4 four generations of memory, these memories have different voltages and contact numbers, and are not compatible with each other.

5. The hard disk is divided into parallel port and serial port, the two interfaces can be compatible through the adapter, and the parallel port and serial port also appear on the optical drive, in recent years, most of the products are serial, and the parallel port is rare, if you want to receive second-hand products, you need to pay attention to the interface.

6. Compatibility is also needed to consider when choosing a case, some cases have a small internal space, which can only support small-sized motherboards, graphics cards and heatsinks, and large-sized components will not be installed or cause the side panel of the case to be covered after installation, which is also a place that users should avoid.

If you want to build a computer by yourself, there are special things that you need to pay attention to during the installation process。Generally speaking, if you build a computer alone, you have a very high degree of control, and if you buy a desktop computer on the market, it is generally integrated. This feature is that it can be more trouble-free, and the manufacturer directly helps us configure it.

You don't need to assemble it yourself, but the downside is that it doesn't have all the good stuff installed on a single computer. It is very common to have some computer accessories that use very powerful graphics cards, but in other parts they use some general components, which are not particularly cost-effective. At this time, there is an independent assembly of computers, which has the advantage of being able to choose the hardware by yourself, which can save money and get better results.

The only drawback is that it is difficult to assemble a good computer without professional knowledge. <>

There are special things to pay attention to when building a computer, which is the graphics card and CPU. These are two very critical parts of the computer, like the graphics card, which has recently started to decrease**. At this time, the choice of graphics card needs to be based on funds, if the capital bank has a lot of money, then you can directly consider the graphics card of the 3090 series, which is very high in performance, and the same is true for CPU.

However, if the funds are limited, then you can only choose graphics cards and CPUs in limited circumstances, and you should also choose those with higher cost performance in memory modules and power supplies. If you simply pursue the value and ignore the quality of the product, it may bring certain problems in the later stage.

Therefore, when building a computer by yourself, you need to pay attention to many aspects. In some parts that are not so important, it can be very simple and simple without spending too much money. It is necessary to spend a lot of money on the graphics card and CPU of the critical computer, which is related to the final performance of the computer, like the chassis, this part can be used as little as possible.

Assembling your own computer should be spent on the best possible way to make it cost-effective.

To consider the cost and practicality, you must choose a brand new accessory, you must choose the right positioning according to your own needs, the motherboard pants architecture can choose the i7 processor, if it is the entry level, you can choose a 300-watt set volt simple graphics card, the independent graphics card can choose a 6pin closed power supply, you must understand the manual, and you should also test the power-on situation and memory many times.

It is necessary to pay attention to the inspection and inspection of the facilities, pay attention to the installation of the radiator, and pay attention to the packaging of the metal.

It is necessary to pay attention to the hard conditions of the test, understand the way of guessing the assembly, pay attention to the installation of memory modules, understand the installation of the radiator, pay attention to the premise of installation, and understand the installation method in terms of slow solution technology.

People's use of computers is getting higher and higher, and some people have higher requirements for computer configuration, and the finished computer configuration has been unable to meet their needs, and the way of computer DIY assembly is more suitable for some people who require high computer configuration, so what do you need to pay attention to in computer DIY assembly and what preparations to make before computer assembly, let's go with it to find out!

1. What should be paid attention to in computer DIY assembly:

1. When assembling your own computer DIY, you can first consider the use, whether it is for daily office use or for playing games and audio, if it is only for daily office use, then the computer configuration should not be so high, but for the game audio, you should choose a slightly higher configuration. After determining the use of computer DIY assembly, you can consider the best factors, and it is best to make a budget before purchasing, because there are many models of computer accessories, and for some people who do not have hard requirements, they do not have to spend money in vain.

2. DIY assembly of the computer is very critical to the choice of motherboard and CPU, the choice of motherboard can choose all-solid-state capacitors, the motherboard is divided into Intel platform and AMD platform, which are two different platforms, and the choice of motherboard should be matched with CPU. As for the choice of CPU, it depends on the panel of the model you use, and the manufacturers of the CPU are mainly Intel and AMD, and the CPUs produced by the two companies have different models, because the interfaces are different, so different motherboards are used.

The choice of graphics card depends on whether you want to play large games, if you are not ready to play games, the computer motherboard comes with a set of graphics that is dust-resistant enough for your computer to run, and if you need a graphics card, you can also buy a graphics card of about 400 yuan It is very good. The choice of chassis power supply is also very important, the chassis is dust-proof, heat dissipation-proof, and the power supply is the power output, and the general configuration is enough to choose a 300W power supply. Other accessories such as keyboard and mouse, sound card, optical drive, audio, etc. can be selected according to your needs.

2. What preparations should be made before computer assembly:

At least to find the right computer configuration on the Internet before the computer DIY assembly, some students who have not configured the computer must not be so professional, through online learning can also let you understand the ability to distinguish between good and bad configurations, or it is recommended that you go to some professional computer configuration network to find configuration, such as computer know-it-all, such as Pacific Computer Network, Zhongguancun ** and other well-known **, can provide you with some professional computer configuration list and functions, as well as**, it is very worthy of your reference.

Summary: The article shares with you what you need to pay attention to in computer DIY assembly and what preparations to make before computer assembly, you can refer to it. Knowing this before building a computer can also reduce the chance of being fooled when building a computer.