Is there any difference between the intelligent lighting switch control module and the PLC module?

1. Time programming.

Automatically open or close loops or partial loops or scene loops based on a predefined time.

2. Local manual control.

In case of special circumstances, the smart panel can be used to force the manual control of the switch of each lighting circuit, which can be manually controlled on the switch module.

3. Multi-place control.

Smart panels can be placed in multiple locations and can be controlled from multiple locations via CAN bus communication.

4. Scene control.

The user can pre-set the loop with the same control mode as a scene, and after the setting is completed, the scene can be selected to switch the scene loop with one key.

5. Emergency treatment and control.

After receiving the alarm of the security and fire protection system, all the lights in the designated area will be automatically turned on.

6. External information control.

The controller can accept the signal of the infrared motion detector, and turn on the lights when people and vehicles come and turn off the lights when they leave; It can also accept the signal of the illuminance detector, and automatically turn on all lights when the illumination level is lower than the set value.

7. Remote control of the system.

The lighting products communicate with the computer software system through the CAN bus and borrow the CAN port to RS232 interface to achieve remote control and management.

The system can display the working status of each circuit of each controller.

Each output can be manually controlled remotely.

Each channel can be set with 10 levels of timing (each channel can set the delay switch function).

Day of the week mode and holiday mode (can be set for the new lunar calendar).

Light control function and fire linkage and scene combination remote setting.

There is a difference, the intelligent lighting control module is only for the lighting system, which can realize the automation of the lighting system through timing, light sensing, etc.

The PLC module can not only realize the above functions, but also realize more abundant control methods such as fixed area and fixed range lighting according to the actual situation.

1. Light control function: each circuit can be set separately to switch the light under different illumination; Some lights need to be turned on as long as it is dark, so the light control function is enabled, and the light control function and the time control function can be used at the same time;

2. Time-controlled function: each circuit can set the time of switching on and off the lights separately to switch the lights on and off at a regular time; For example, some lights are turned on and off according to the time, so the time control function is enabled;

3. Remote control function: there is a light in the bedroom to control the living room, and a light in the bathroom in the living room.

4. Human sensory function: when the time of detection of someone is there, turn on the light, and turn off the light when the person leaves;