How to maintain the DSL especially to prevent short shafts!! Thanked!

Don't fall and press it, the rest is left to fate! It's a consumer product, and it won't be so careful in a few months.

Broken shaft problem There is a similar situation in all versions of the machine, Nintendo officially said that the axle break rate accounts for 2 of the machines sold, so this kind of thing still depends on the RP.

Prevention of shaft breakage. 1.Use a DS protective case, but the amount of the whole machine will be increased, so decide for yourself.

2.When turning the lid, pay attention to the strength of your fingers in the ** part of the cover, and it is best to use your thumb to make force. When covering, it is necessary to keep the strength of the left and right sides of the shaft the same, and the solution after the shaft is broken see here, both of which are.

Don't talk nonsense upstairs.,DS broken shaft is not 50%,A few of my classmates have not broken the shaft from a year ago to the recent purchase of NDSL and IDSL.,You yourself broke the shaft and said that there is a 50% chance of breaking the shaft.,Is your statistics more accurate than Nintendo?,Obviously your own RP is not good.,The landlord doesn't have to worry too much.,It's not so easy to break the shaft with a crystal shell.。

Basically, more than 50% will break, and it is difficult to avoid, mine will break, and the tape will be on at present.

My colleague's is broken, and mine is broken, what does LS think?

In short, as long as it can be used, it's just a little troublesome in the first few days, and it doesn't affect the play, and you forget it after a few days. . .

It's really broken, you can:

1. Ignore. 2. Glue on.

3. Find JS or replace or repair it yourself.

4. Buy a new machine.

5. Not alive anymore.

The person who said this is a good cow, according to the understanding you relayed, that is, the structure of the pure continental crust of the two colors of NDSL is different, and I don't think it is possible. Black and white are the same, and broken shafts will be avoided as long as you pay attention to them when you use them. The white button is easy to make the imitation yellow, so it is also good to buy the black one.

Anyway, I haven't seen much of a black stub on the Internet, but there must be.

In fact, it is easy to break, which is a common phenomenon, and the new DSI has changed a lot.

That's lying to you. If you are afraid of the short axis, buy NDS

I'm on the Netcom, that's the case. The reasons for Netcom are impossible. First.

You ask the Netcom staff to change the backbone cable for you. Wiring cables. Then get you a network cable from the outside, from the wiring directly to the cat.

Don't go through any electricity. Or the interference line of cable TV or something. The ports are also swapped out.

port this is unlikely) and then observe this lamp under adsl. Because ADSL doesn't always have a signal. That's why error 678 is prompted, and it is estimated that there is also error 691

Let's go with 676. This situation is really difficult to fix. Let them fix slowly.

It should be able to solve it, I don't know if what I said is useful. You try it.

There is also the possibility that the voltage is unstable. You measure whether the voltage in your home is stable. If you're unstable, buy a voltage regulator. The voltage is unstable and the connection is also dropped.

You look closely ... The cat DSL light must be always on...

If it's always on... That is... Problems between cats and computers.

Check the network card... or cats...

Try modifying. The connection mode of the network card...

Change to 10m and try again.

My family is too, old and disconnected. No way! Call ** to Netcom and say that they are repairing it themselves! No credibility!

Sometimes the signals will interfere with each other, such as broadband and ** in the same line, broadband on the time to live will be caused by **, pay attention to it.

You first see if there is any noise in your home**. If there is a noise, it is a problem with the outside line, and if there is no noise, it is a problem with your cat.

Generally, the broken shaft is not caused by the strength of the clamshell, and the broken shaft is due to the old upper screen opened to 180"Or it is caused by not getting stuck in first gear.

Every time the flap is lifted by the buckle inside, the early shaft material is more fragile, it is cracked, and the current machine generally does not have this kind of problem

In addition, it was suggested to buy a crystal case with black corners, which is now sold for about 50, which can protect the shaft of the DSL very well.

Usually open and close lightly.

Do not open and close frequently.

The shell is generally to protect the shaft, and there is no reason to break, but the phenomenon of broken shaft is also relatively common, so it is best to use less force when opening the cover.

That's up to you how you use it! It doesn't matter if you don't use a protective case with a new maintenance, let alone a protective case!

My white machine is a slag made of a crystal shell with a leased world, because the weight is too large, and the bearing can't stand it. But there is nothing to say about the protective effect of the crystal shell, as long as you are careful to use the disadvantages, it should be no problem.