How many stages is there to prepare for the first level fire engineer exam?

Reading guide] as far as the current degree of fire protection engineer is concerned,Zero-based candidates are the majority,Whether it's because of the affiliation fee or because you really want to engage in this industry,The preparation period before the exam is very critical,Zero-based candidates want to successfully prepare for the exam,It is necessary to prepare for the exam in sections,Carefully review,What I want to introduce to you today is the zero-based sectional preparation for the first-level fire engineer strategy。

1. Pre-review stage.

We know that there are a total of three subjects in the first elimination exam, and the difficulty is still relatively large, so it is recommended that zero-based candidates start to pre-review from now on, mainly to familiarize themselves with the textbooks, build a knowledge framework diagram, and understand the knowledge points mentioned in the textbooks.

2. Basic review stage.

From now on, we have entered the basic review stage of a match, with the basis of the previous stage of review, we take out the latest version of the textbook for review, and compare it with the old version of the textbook, especially some new knowledge points must be reviewed in a key way.

3. Consolidate and improve the stage.

We have a certain understanding of the basic knowledge, and have basically mastered it, at this time we can do some comprehensive exercises, which can be trained with targeted training to strengthen the memory of the basic knowledge.

4. Breakthrough stage before the exam.

We can take out the past real questions or the latest mock questions, conduct mock exams, complete the test papers within the specified time, and focus on checking and filling in the gaps for the knowledge points that are not very good, and correct the wrong questions, sort them out in the wrong question book, and take them out when you have time.

The above is the zero-based segmented preparation for the first-level fire engineer strategy, I believe that after the above four stages, your first-level fire engineer exam will be basically no problem, of course, if you have knowledge to complete each stage hastily, and do not make corresponding efforts, then you are still far from success, when reviewing and preparing for the exam, you can make a mind map of the important test points of the fire engineer, and prepare for the exam in a planned manner.

The duration of each subject of the Registered Fire Engineer I Examination is as follows:

1. "Fire Safety Technical Practice".

Exam duration: 2-5 hours.

Question type: Multiple choice questions (80 questions), Multiple choice questions (20 questions).

Maximum score: 120 points.

2. Comprehensive Ability of Fire Protection Technology

Exam duration: 2-5 hours.

Question type: Multiple choice questions (80 questions), Multiple choice questions (20 questions).

Maximum score: 120 points.

3. "Fire Safety Case Analysis".

Exam duration: 3 hours.

Question type: Subjective (6 questions).

Maximum score: 120 points.

The total marks of the three subject papers are 120 points. Each subject needs to reach more than 72 points (including 72 points), the second-level fire engineer is currently not organized in the provinces of the examination, so the fire engineer we are talking about, are the default is a registered fire engineer, if the later provinces open the examination, this will be announced in the provincial personnel examination network.

We'll be happy to answer for you.

The examination of the first-level fire engineer consists of three subjects: "Fire Safety Technical Practice", "Comprehensive Ability of Fire Safety Technology", and "Fire Safety Case Analysis".

Exams are usually held on the second weekend of November.

9:00 a.m. to 11:30 a.m. on the first day of the first day to take the "Fire Safety Technical Practice"; 14:14 p.m

00 16:30 Test "Comprehensive Ability of Fire Safety Technology", these two subjects are two and a half hours of exam duration, both are objective questions 80 single choice + 20 multiple choice.

From 9:00 a.m. to 12:00 p.m. on the second day, the last subject of "Comprehensive Ability of Fire Safety Technology" will be tested for three hours, with 2 multiple-choice questions + 4 subjective questions.

1. "Fire Safety Technical Practice".

Exam duration: hours.

Question type: Multiple choice questions (80 questions), Multiple choice questions (20 questions).

Maximum score: 120 points.

2. Comprehensive Ability of Fire Protection Technology

Exam duration: hours.

Question type: Multiple choice questions (80 questions), Multiple choice questions (20 questions).

Maximum score: 120 points.

3. "Fire Safety Case Analysis".

Exam duration: 3 hours.

Question type: Subjective (6 questions).

Maximum score: 120 points.

Class 1 Registered Fire Engineer Examination:

Day 1: 9:00 a.m. 11:30 a.m. Fire Safety Technical Practice.

14:00 p.m. 16:30 Comprehensive capacity of fire safety technology.

Day 2: 9:00 a.m. 12:00 p.m. Fire safety case study.

Level 1 Fire Engineer Question Type, Question Quantity, Exam Duration, Test Paper Score:

The subjects of the first-level fire engineer examination include "Fire Safety Technical Practice", "Comprehensive Ability of Fire Protection Technology", and "Fire Safety Case Analysis", which are all subjective questions and other subjects are objective questions.

Objective questions are multiple-choice questions, including multiple-choice and multiple-choice questions. In the multiple-choice question, there are two or more options that match the meaning of the question, and no points will be awarded for the wrong choice; If you miss the selection, you will not be able to get a full score, and you will be scored according to the number of correct options.

The first-class registered fire engineer qualification examination consists of three subjects: fire safety technical practice, fire safety technical comprehensive ability and fire safety case analysis, and the results are managed on a rolling basis: those who take all three subject examinations (the level is all subjects) must pass the examination subjects in three consecutive examination years, and those who participate in the two subject examinations (the level is exempt from one subject) must pass the examination subjects within two consecutive examination years in order to obtain the qualification certificate.

1. Fire safety technical practice: the examination duration is hour, multiple-choice questions: 80 questions and 1 point; Multiple choice questions: 20 questions and 2 points. The maximum score is 120 points.

2. Fire safety case analysis: the exam duration is 3 hours, and there are 6 case questions. 120 points Multiple choice questions: 20 questions and 2 points. The maximum score is 120 points.

3. Comprehensive ability of fire protection technology: the duration of the examination is hour, single choice: 80 questions and 1 point; Multiple choice questions: 20 questions and 2 points. The maximum score is 120 points.

Fire Safety Case Analysis" is a subjective question, and the answer method is to answer on a special answer sheet; Before answering the questions, you need to carefully read the precautions of the test paper and the instructions for answering on the first page of the special answer sheet, and use the prescribed answering tools to answer in the area demarcated by the special answer sheet; The other two subjects of fire protection are objective questions, and they are answered on the answer sheet with a 2B pencil.

Examination results are managed on a rolling basis, and those who take all three subjects must pass all subjects within three examination years; Those who are exempted from taking some subjects (exempted from 1 subject) must pass the examination subjects in 2 examination years in order to obtain the qualification certificate.

The duration of the Class 1 Registered Fire Engineer examination is a three-year examination cycle.

1. Examination subjects of first-class fire engineer:

The examination subjects are divided into three subjects: fire safety technology practice, fire safety technology comprehensive ability and fire safety case analysis.

The assessment time for fire safety technology practice and fire safety technology comprehensive ability is hours, and the assessment time for fire safety case analysis is 3 hours.

3. Secondary Fire Engineer Examination Subjects:

There are two exams for Fire Engineer II. Both exams are valid for two years. That is, you can pass the exam twice in two years. The two exams are the comprehensive ability of fire safety technology and fire safety case analysis.

The assessment time for comprehensive ability of fire safety technology and fire safety case analysis is 3 hours.

Level 1 Fire Engineer Examination Subjects: The examination consists of three subjects: "Fire Safety Technical Practice", "Fire Safety Technology Comprehensive Ability" and "Fire Safety Case Analysis".

Examination results are managed on a rolling basis for a period of 3 years. Those who take all three subjects must pass all the subjects in three consecutive examination years to obtain the qualification certificate; Those who meet the conditions for exemption from the examination and take the examination of 2 subjects must pass all the subjects taken within 2 consecutive examination years in order to obtain the qualification certificate.

The type of questions and the way to answer the questions.

The two subject test questions of "Fire Safety Technology Practice" and "Comprehensive Ability of Fire Safety Technology" are objective questions and are answered on the ordinary answer sheet; The test question of "Fire Safety Case Analysis" is subjective, and the answers are answered on a special answer sheet.

Candidates can bring stationery such as black ink pens, 2B pencils, erasers, and calculators with silent and textual functions when taking the test, and other items should be placed uniformly. Scratch paper should be available in the examination room for candidates to obtain and collect after the examination.

There are three subjects for first-class registered fire engineers: "Fire Safety Technical Practice", "Comprehensive Ability of Fire Protection Technology" and "Fire Safety Case Analysis";

1. "Fire Safety Technical Practice".

Exam duration: hours.

Question type: Multiple choice questions (80 questions), Multiple choice questions (20 questions).

Maximum score: 120 points.

2. Comprehensive Ability of Fire Protection Technology

Exam duration: hours.

Question type: Multiple choice questions (80 questions), Multiple choice questions (20 questions).

Maximum score: 120 points.

3. "Fire Safety Case Analysis".

Exam duration: 3 hours.

Question type: Subjective (6 questions).

Maximum score: 120 points.

"Fire Safety Technical Practice", the exam time is hours, 9:00 am to 11:30 am on the first day

Comprehensive Ability in Fire Safety Technology", the exam time is hourly, 14:00 to 16:30 on the first day

Fire Safety Case Analysis", the exam lasts for 3 hours, and the next day is 9:00 a.m. to 12:00 p.m

Hello, the technical practice and comprehensive ability are two and a half hours, and the case analysis is three hours.

The test of technical practice and comprehensive ability is two and a half hours, and the test of case analysis is three hours.

Without further ado, look at the table below!

There are three exams, and the details are as follows.

There are a certain number of test points for the three subjects, and there are many and miscellaneous knowledge points at the same time, so it is difficult to say. However, the test results are valid for three years, and at the same time, multiple-choice questions are the main questions, and a passing test is sufficient. There are the same parts between the knowledge points, and you can learn systematically when reviewing, so you don't have to worry too much as you prepare for the exam carefully.

For candidates with zero foundation, it is best to start preparing for the first-level fire engineer exam half a year in advance, leaving about 3 hours of study time every day. Of course, this is an ideal state, and everyone's own situation is different, so it is best to arrange a study plan according to your own time.

Grab the scoring points.

In order to pass the exam, you must first understand the content of the fire engineer exam and your actual level. However, under normal circumstances, the learning speed of zero-based candidates is not high, and they may not even be able to complete all the study tasks before the exam. Therefore, in order to ensure customs clearance, it is recommended that in addition to working hard to improve your learning ability, you should give priority to learning content that is easy to score.

To prepare for the fire engineer fire protection exam, if there is no way to be fast, then everyone must at least be accurate, and strive to do the test, although it may not be a full meeting, but it must be tested.

Pay attention to the quality of teaching materials and questions.

Regardless of whether the candidate has a foundation or not, the textbook is the first step for the candidate to understand the fire engineer exam. Exam tutorial textbook is an important basis for the proposition of the fire engineer Zheng Bo exam, generally speaking, the tutorial textbook contains the scope of the proposition and the answer standard. Candidates should also pay attention to the type and content of the exam questions in previous years, and study the ideas and characteristics of the exam questions.

At the same time, fire engineer preparation is always inseparable from doing questions. In the process of doing questions, we should not blindly pursue the number of questions, and despise the quality of questions, and it is important to do more questions than to do more.

1. Fire protection involves a wide range of standards, and there are many specifications for stupid shirts, starting from your entry, buying information, collecting information, it takes a lot of time, and when you are smooth, I think it will take at least a month to pass. After signing up for the training course, the previous time-consuming steps can be omitted, and the training institution has prepared materials for you.

2. The textbooks of fire engineers are different every year, of course, you can't wait until the new textbooks come out to prepare for the exam, which will definitely be too late. In the middle of the review, new textbooks are released, and I still need to spend time comparing and sorting out new knowledge points, and many people are messed up while learning. If you sign up for a training class, then the teacher will sort out the knowledge points for you and review them directly, which saves a lot of time.

3. We are all fixed in the thinking of the poor, always thinking about achieving the greatest goal at the minimum cost, although the starting point is good, but our determination is not in place to shout auspicious, always wasting money and time again and again, so, before making a decision, I hope to have a reasonable and objective understanding and evaluation of myself. Money is worth a lot of money, and time is also worth a lot of money.

There are three subjects in the first-class fire engineer examination, and the examination results are retained for three examination years, so it is possible to take one subject a year. Candidates can arrange the revision time according to their own situation and the subjects they are applying for, and I recommend that it should not be less than 3 months.

1. Start with basic common sense.

In fact, this situation is normal, because the fire test is highly professional and difficult, so I suggest that you must start with basic knowledge when you study. First, these contents are relatively simple, easy for candidates to get started, and secondly, they can slowly build confidence, although the difficulty of learning is gradually increasing, but the basic level of the candidates themselves is also improving, so improving confidence helps candidates to persist in completing follow-up tasks.

2. Matching learning of each subject.

Although there are only three subjects in the first-level fire engineer examination, but in the current situation of insufficient time left, if you choose to study alone, then not only the learning burden is heavier, the psychological pressure is greater, and the efficiency is not high, so candidates should combine each subject to study, and first integrate the similar test points in the practical and comprehensive subjects, and practice and consolidate through cases after the module study, which not only saves time, but also ensures efficiency.

3. Learn from reasonable methods.

Many candidates will still be overwhelmed after starting to prepare for the exam, so at this time, candidates can learn from reasonable methods like their predecessors, because no one can understand candidates better than candidates, and some zero-based candidates have also completed the preparation task well through their own methods and efforts, so learning some of their experience methods can effectively solve their own problems and make up for their own disadvantages, but also pay attention not to copy directly, because there are differences in abilities and habits between people, If the method is good, it should be improved according to the situation, so that your preparation for the exam can be carried out effectively.

In previous years, the examination subjects of first-class registered fire engineer were divided into three subjects, namely: "Fire Safety Technical Practice", "Fire Safety Technology Comprehensive Ability" and "Fire Safety Case Analysis".

1. Apply for one course: practice. It is recommended to start with a practical course for the fire engineer exam, which is a course that closely combines theory and practice among the three courses, and is also the basis of synthesis and cases.

Learning practical courses well can increase your confidence in passing the other two courses.

2. Apply for two subjects: practical + comprehensive. There are many contents that need to be memorized in "Fire Safety Technology Practice", and some content in practical subjects is included in "Fire Safety Technology Comprehensive Ability", which complement each other, and the learning effect is far greater than "1+1".

The content of "Fire Safety Case Analysis" is more comprehensible than "Fire Safety Technical Practice" and "Fire Safety Technology Comprehensive Ability", and it involves a lot of practical and comprehensive content, if you have a certain experience and foundation, it is recommended to choose a combination of practice + comprehensive + case.