What is the distance between the hive and the nest frame?

BeehivesThe distance from the nest frame is 6 mm. Among them, the bee road is the main basis for the design of the beehive, which refers to the gap between the nest frame and the nest frame, and the nest frame and other parts of the beehive, and the main function is for bees to pass and air circulation.

The distance between the nest frame and the nest frame is generally 8 mm, the distance between the two sides of the nest frame and the beehive wall is 8 mm, the distance between the beehive sub-cover and the upper beam of the nest frame is 6 mm, and the distance between the lower beam of the nest frame and the bottom of the beehive is 25 mm.

Production requirements. 1. The wood for making beehives should be sturdy, durable, lightweight, not easy to deform and crack. In the north, white pine, red pine, paulownia and basswood are used.

etc.; Fir wood is available in the south. Before making, the wood should be fully air-dried or tumbled.

2. The four walls of the box body should be made of whole wooden boards. If you use smaller wooden boards for splicing, it is best to use convex and concave surfaces or staggered splicing at the splicing place to glue firmly. When the former is adopted, the plate with a convex surface is placed below, and the plate with a concave surface is placed on the top; When the latter is adopted.

The top plate should be made into a surface. In order to avoid raining for a long time, rainwater will leak into the box body and affect the service life.

The bee road is the main basis for the design of the beehive, which refers to the gap between the nest frame and the nest frame, the nest frame and other parts of the beehive, and the main function is for bees to pass and air circulation, for example, the bee generally requires the distance between the nest frame and the nest frame to be 8 mm, the distance between the two sides of the nest frame and the beehive wall is 8 mm, the distance between the beehive sub-cover and the upper beam of the nest frame is 6 mm, and the distance between the lower beam of the nest frame and the bottom of the beehive is 25 mm, and the body size of the bee is slightly smaller than that of the bee, so the bee road is also smaller than the bee.

What is the distance between the hive and the nest frame?

Bees in the box: add a nest box to the hive, one at a time! Add another one to nearly seven-eighths of the area where the bee has done, and so on.

Don't add it until it's seven-eighths! Watch the distance! Westbee:

At the beginning, add a nest foundation to the nest frame, otherwise, the western bee will not make its own nest! Later the same as the bee. Either use the nest base machine to make it yourself, or buy it yourself!

But some Western bees don't use it.

This is different for each one, and should this distance be fixed? Everyone who keeps bees, they have their own rules.

What is the geometric photo distance of the seal? I don't know too much, check it out.

Summary. Hello, the nest frame used for 46 beehives is 46*41*finished nest frame.

Hello, the nest frame used for 46 beehives is 46*41*finished nest frame.

Hello, <>

Some common nest frame specifications are listed for you: A: Oak Cover Daden Hive (460 mm Calendar 270 mm) B:

Kuntzsch beehive (330 mm, 250 mm) C: Lang's beehive (448 mm, 232 mm) D: German standard beehive (370 mm, 223 mm) E:

Chandel Hive (420 mm 220 mm) F:2 3 Langs Hive (448 mm 159 mm).

All things considered, it is recommended that you use Lang's beehives (i.e., the standard beehives of Italian bees). The structure of Lang's beehives is simple and smooth, which meets the biological requirements of bee colonies, and is convenient for checking the situation of bee colonies and dealing with related problems at any time. Lang's beehives are easy to carry in the field, and there is no need to add additional protection devices.

A beehive consists of a box bottom (the bottom of the box is usually higher in Germany), multiple boxes [a single independent small box, Xinchang includes a nest box (spawning area) and a relay box (honey storage area)] and a box cover. The cabinet has only four walls, which can be stacked and interchangeable. Stacking relay boxes can expand the beehive, and each box can place 8 12 nest boxes.

The bottom of the beehive mainly plays the role of ventilation, and the nest door is embedded in it. The nest door is often made of wooden strips, and it is equipped with a nest door stopper, which can be used to narrow the celebration or close the nest door. The top of the bottom of the box is usually covered with a partition to prevent the bees from bending down and creating a spleen.

It is best to use a fence board for the partition, and a plastic box can be placed under the board to catch the mites falling from the bees. The transparent fence prevents mold from forming the hive and keeps the hive ventilated. Beehive closures should preferably be of composite construction – an inner lid with good insulation properties and an outer metal cover.

In addition, the top layer of the relay box should be covered with a cloth to prevent bees from building a spleen between the frame beam and the box cover. The right choice: It is recommended that beginners observe the structure of various beehives to see how heavy they are and whether they are easy to move.

When buying a beehive, in addition to considering the region where you are located (different regions have different climates), you should also consider your personal needs and your own physical condition.

Hello, it is a pleasure to serve you and give you the following answer: according to the size of the beehive, you should choose a suitable nest frame. Generally speaking, the size of the beehive is 49 cm, then you should choose a nest frame with a size of 50 cm.

The steps to purchase a nest box are as follows:1First of all, the size of the hive should be determined, and then the appropriate nest frame should be selected according to the size of the hive after burning.

2.Then, the quality of the nest frame should be checked to make sure that it is sturdy and durable. 3.

Next, the size of the nest box should be checked to make sure that it matches the size of the beehive. 4.Finally, the surface of the nest frame should be inspected to make sure that it is not damaged in any way.

Personal tip: When buying a nest frame, you should carefully check the quality, size and surface to ensure that they can meet the requirements of the hive.

Summary. Dear, Hello is a pleasure to serve you in the Ten Frame Beehive, the large bee plate is usually placed above or below the nest frame instead of in the middle, so that the bees can freely move in and out of the nest frame and traverse the hive along the top and bottom. If you place the large bee plate in the middle of the nest frame, it can cause the following problems:

1.Obstructing bees from entering and exiting: The nest frame may be blocked, preventing bees from moving inside the hive.

This can lead to bees not having access to adequate food and water in a timely manner, affecting the normal growth and development of the colony. 2.It is not conducive to the ventilation of the swarm:

Placing the large bee plate in the middle may affect the ventilation and ventilation of the colony. Good ventilation and proper humidity control are very important during the hot and humid summer months to help keep the bees healthy and effective breeding. To maintain the health of your bees and increase their yield, use the 10-box hives as recommended and follow the relevant operating practices to ensure optimal colony management.

If my answer is helpful to you, please give a thumbs up (rate in the lower left corner), look forward to your like, your efforts are very important to me, and finally I wish you good health and a happy mood again!

Whether the slabs of the ten beehives are placed in the middle or against the nest frame.

Dear, Hello is a pleasure to serve you in the Ten Frame Beehive, the large bee plate is usually placed above or below the nest frame instead of in the middle, so that the bees can freely move in and out of the nest frame and traverse the hive along the top and bottom. If you place the large bee board in the middle of the nest bee frame, it may cause the following problems:1

Obstructing bees from entering and exiting: The nest frame may be blocked, preventing bees from moving inside the hive. This can lead to bees not having access to adequate food and water in a timely manner, affecting the normal growth and development of the colony.

2.It is not conducive to the ventilation of the bee colony: Placing the large bee plate in the middle key hall may affect the ventilation and ventilation of the bee colony.

Good ventilation and proper humidity control are very important during the hot and humid summer months to help keep the bees healthy and effective breeding. In order to maintain the health of the bees and increase production, please use this hive in the recommended way and follow the relevant practice to ensure optimal colony management. If my answer is helpful to you, please give a thumbs up (comment in the lower left corner), look forward to your like, your efforts are very important to me, and finally I wish you good health and a happy mood!

I failed to understand above and below?

I can put it on top or underneath.

1. Standard honeycomb frame specifications: (length, width and height).

Outer dimensions of the nest box: 41cm 51cm 26cm;

The inner size of the nest box is 37cm 47cm 26cm;

The size of the lid is 45cm, 55cm, 8cm.

2. Nest box: There is a shallow groove with a width of 12mm and a depth of 3mm on the inner surface of the front and rear walls for the isolation plate to be inserted; There are two notches 120 mm long and 20 mm wide on the lower edge of the front wall; A nest door panel with a length of 386 mm, a height of 50 mm, and a thickness of 15 mm is inserted in the front.

There are 10 round hole nest doors on one side of the board, and two tongue-shaped nest doors with a length of 60 mm and a height of 10 mm on the other side. There are two 80mm xllomm iron screens on the upper part of the rear wall, and each has a 100mm wide wooden board that can be moved from side to side for opening and closing.

3. Box cover: 1. The inner circumference is 490mm long, 420mm wide, 85mm high, and 15mm thick;

3. Add galvanized iron sheet or linoleum on the lid of the box. There are two tongue-shaped vents on each side that are 100 mm long and 20 mm high.

The dimensions of the honeycomb frame are: 41 cm 51 cm 26 cm. 1. The middle honeycomb frame is the most commonly used overlapping live frame beehive in beekeepers.

A standard beehive consists of 10 hive frames, a cabinet body, a bottom of the beehive, a bee door section, a secondary cover, a box cover and a partition. 2. The nest frame is an important part of the nest box, which is composed of the upper beam, the lower beam and the side strip, and the socks are used to support, fix and protect the nest spleen. Its shape, size, and number play a decisive role in the design of beehives.

3. The nest frame is divided into three types: square frame, high and wide frame and low wide frame, and now the simplest core is mainly used in the low width frame, usually with wide width. In this way, the unity of the bees in the incubator can be improved, which is conducive to the management of the bee colony.