What are the shampoo formulas? What are the functions of shampoo formulations?

In general, good formulations are obtained through good sample analysis. Through microspectral analysis, the composition of the product and the proportion of each component can be accurately obtained, and then the technical support in the later stage can be added to achieve the final production effect. You can send a private message if you need it

1. New formula: shampoo surfactant + pearlescent pulp + moisturizing softener + thickening powder + water + flavor + pigment + preservative = shampoo. Other special functional additives are added separately.

2. Reference of raw material consumption (calculated per 100 catties of underwater material).

1. Preservatives: preservatives are put in 10,000 percent, preservatives are put in 1,000 percent, and preservatives must be combined: preservative content, storage time, climate change, temperature regulation, and water quality to calculate the addition of preservatives.

2. Put 550-600 grams of translucent thickening powder, which can be compounded with salt, and the pH value will decrease if the pH value is higher than 10 and lower than 5. It is alkaline and turns beige.

3. Put 500-550 grams of fully transparent thickening powder, which cannot be compounded with salt, and will be layered with salt.

4. Put 20-100 grams of brushed powder.

5. The shade required for pigmentation is self-determined, and the conventional is to put 1 gram.

6. The intensity of the flavor needs to be self-determined, and the conventional is to put 10-20 grams.

7. The surfactant depends on the needs of the formula cost.

8. The amount of pearlescent pulp needs to be customized, and the conventional is to put 500 grams.

9. The amount of softener is self-determined, and the conventional is to put 2-3 kg.

10. Other special functional additives are added separately.

Production method: 1. Brush the soap with a toothbrush and soak it in boiling water, it is not easy to bubble if it is too dry, and it takes 2-3 days to soak it completely.

2. Mash the swelling soaphorn, the more you soak, the easier it is to smash, of course, it is best to use a stone spoon (pound pepper pepper noodles), add 10 times water to heat the soaphorn after smashing, and it is easy to bubble after the soaphorn water is boiled.

The water should be boiled on low heat before boiling, add some brown sugar (to help beneficial microorganisms ferment after the soaphorn liquid is stored), stir and boil for another 10 minutes, turn off the heat after the soaphorn liquid is thicker, and let it cool and filter the bottle (use the drink bottle and shampoo bottle that friends don't want to pack, of course, it is best to use glass or porcelain bottles).

When the temperature is not low, try to store it in the refrigerator, and the soaphorn liquid boiled for the first time is thicker and suitable for washing hair.

3. Add 3 times the water to the previous soaphorn residue and stir it again to boil, and then bottle it after it becomes thicker, the soaphorn liquid boiled this time can be used to liquid hands and liquid bowls, etc., and it is best to put it in the refrigerator when the temperature is not low.

4. Put the slag in a cloth bag and put it in the washing machine instead of washing powder for reuse, because the soaphorn liquid is a plant liquid, it is a food that many microorganisms like, and it deteriorates faster at high temperature at room temperature, and after adding an appropriate amount of brown sugar, it is more conducive to the fermentation of beneficial microorganisms, but it is stored at low temperature in the refrigerator during the day.

Homemade soaphorn shampoo recipe 1

1. Brush the soap with a toothbrush and soak it with boiling water, the too dry soap horn is not easy to bubble, and it takes 2 to 3 days to completely soak it;

2. Mash the swelling soap horn, the more the bubble rises, the easier it is to smash, it is best to mash it with a stone;

3. Add 10 times water to heat the saponaria after samponaria, the soaphorn water is easy to bubble after boiling, turn on a low heat before the water is boiled, add some brown sugar (to help the beneficial microorganisms ferment after the soaphorn liquid is stored) stir, boil for another 10 minutes, and turn off the fire after the soaphorn liquid is thicker;

4. Cold, filtered and bottled (preferably in glass or porcelain bottles), try to store in the refrigerator when the temperature is not low, and the soaphorn liquid boiled for the first time is thicker and suitable for washing hair.

Homemade soaphorn shampoo recipe 2

1. Mash the main raw materials of soaphorn, oil hazard, and shouwu, if there is a small hammer at home, you can use a small hammer to break it, and then rinse it with water, and then soak it in water for about half an hour or more;

2. Put the soaked materials into the pot, do not use an iron pot, stainless steel pot or casserole pot, add 3 times the water, and heat over high heat;

3. Wait for the water to boil slowly over low heat, pay attention to stirring when boiling, beware of sticking to the pot and burning, generally boil for more than 5 hours;

4. After boiling, filter out the slag and put it aside to cool, and you can store it in the refrigerator in summer.

Homemade soaphorn shampoo recipe 3

1. Wash and cut 250g of soaphorn and remove the pit, wash and remove the core of 250g of soapberry, and then put a total of 100g of arborvitae leaves, Polygonum multiflori, black lotus and angelica together in the rice washing water and soak them for one day and one night (three times before cooking rice, take a total of two times of water; The rice water is used for soaking once, and the second time is set aside);

2. Put the rice water soaked in medicinal herbs into a pot and boil, boil over high heat and then boil for another 15 minutes, filter and take water;

3. Add half of the second rice washing water, repeat the first process, and then boil the remaining rice washing water for the third time.

4. Pour the filtrate 3 times back into the pot, boil it with the residue, and boil it until the soaphorn is rotten, about 20 minutes, the liquid is relatively thick, cool and filter.

5. Use the final filtrate to prepare the amino acid foaming agent in the ratio of 20% to 25%, and stir evenly.

Homemade soaphorn shampoo recipe 4

1. Prepare 100g of Shou Wu, Saponaria sinensis, soapberry and ginger, 60g of tea seed powder and angelica, 40g of arborvitae leaves, 20g of black beans, 10g of almonds and mint, and half a lemon;

2. Grind all the ingredients except lemon, so that the shampoo will be thicker;

3. Put the ingredients into the pot, add rice water, and ferment for two days is better.

4. After boiling, turn to low heat and boil for about four hours, stirring constantly, beware of burning;

5. Put it in a cold bottle, you can add essential oils that suit you, and the effect will be better.

The shampoo formula is as follows:

Basic formula: flexible detergent core masterbatch, pearlescent pulp, water, salt, preservatives, flavors, pigments, drawing powder. Variation Recipe:

Flexible detergent core masterbatch, moisturizing and brightening agent, pearlescent pulp Xunzestove, water, salt, preservatives, flavors, pigments, brushed powder, equal to mid-range shampoo.

Flexible detergent core masterbatch, moisturizing and brightening agent, special functional additives, pearlescent pulp, water, salt, anti-staggering agent, fragrance, color acre dressing agent, brushing powder, equal to special effect shampoo.