Billiards dry, which one is better. Is there any difference between those who have two verses and th

I've never heard of the three sections, and the doesn't blow like this. If you want to be easy to carry, you can buy three-quarters, and if you want to have a good feel, you can buy through the rod.

It is recommended to use the rod, the transmission is good, and the copper connection should be maintained in the section, which is still a bit troublesome, and the copper connection is still a problem for playing after a long time, and the transmission will be broken if the maintenance is not good.

The force transmission of the rod is better than that of 3 4, and there are three sections of the jump in one. . . I've never seen the magic nine-section whip.

Of course, it's a through-stick play through,

There are three sections? Plus a small length?

I don't know, it's better to cut it in two.

A good club is used as a ball for one's own use, so that the club keeps it very straight in normal play, so that it is protected. The average club is kept in a box with two or three clubs. But there are a lot of clubs according to different climate and geographical differences will produce wet and dry changes, a good club to protect it, generally use the boom, put their own club on the boom to make the rod vertical, so that the club, usually not deformed.

In addition, the most important thing is that a good club should not be pressed with anything else, and if the wood with good pressure is implemented for a long time, it will be deformed.

Two sections can also be used ( mainly depends on whether you use it smoothly or not is the best for yourself I generally use two sections, after the boring can also turn around to play (

Billiards and billiards both refer to the same indoor sports, and billiards is just the name of Guangdong, Hong Kong and Macao.

Billiards should be a fairly professionally written name. Billiards should be a more local name, but there is no difference in essence.

There is no difference between a table and a table.

What's the difference between billiards and billiards?

Oh hehe

Billiards is played on a table.

Billiards is different in that it is played on a table.

It doesn't make a difference, it's called differently in different places, it's mainly regional differences.

It's the same, it's just called different.

There's no difference, it's just a different name.

I don't know how to pretend to know how to talk a few times, billiards is billiards, you can call it a table or a table, we call billiards Hong Kong and Macao, there is no difference between billiards.

It shouldn't make a difference.

There is only one kind of slate recognized by the official billiards organization in the world, that is, cyan slate, called slate in English, commonly known as bluestone, which is the best kind of billiard slate found at present, and the world's three major billiard slate production areas are Jiangxi, China, Genoa (Genova, Italy) and Minas Gerais, Brazil, The slate in these three places has been recognized by the World Billiards Organization, and has also been used in some competitions in the world.

The best is still the slate bluestone produced in Shanxi, China.

It is good to use marble The international top table is made of a kind of marble from Italy.

It is recommended that you choose a brand club, a brand of leather head, because the brand's products will be designed and manufactured according to the professionalism of consumers, unlike those miscellaneous brands, which just look like clubs, which are actually not easy to use at all.

It is related, some strokes can only be played with a good leather head. There are many factors that affect the quality of billiard cues, but without a good leather head, you will definitely not be able to play the effect of a good club.

It has something to do with the leather head, a rod is mainly the leather head, the leather head is good, and the ball played is good.

There are many factors to measure the quality of billiard cues, mainly hardness, elasticity, force transmission, process, appearance, etc., if you are a novice, you should still find an experienced person to help you choose, because these factors are difficult to describe in words, all by feel and experience. The leather head is also very important, just like the tires of a car, no matter how good the car is, without good tires, it is difficult to play the performance of the car.

1 The club body should be straight, and the club should be rolled on the table or flat plate to see if the club head jumps up and down. Whether the shaft is close to the table, the clubhead does not jump, and the shaft is rotating, always keeping it close to the table, indicates that the club is straight. Another way is:

Hold the club up with your hand as if you were aiming at it, and look at the shaft as you turn the club to see if it stays in a straight line. A bent club can affect aiming and hitting the ball.

2 The length of the club. It needs to be selected according to the different height and height of each person. The method is to stand upright, measure the height from the ground with a ruler, from the shoulders to the lips, and this height is the height of the club to be selected.

At present, the length of the clubs in the store is meters, the weight is about 450 grams - 500 grams, and some clubs are marked with a weight oz (that is, two ounces of the UK, loz = grams), and generally a 19oz weight club can be used. In foreign countries, you can customize the club according to your own requirements, choose your own materials, set the size and weight of the specifications, and buy a club that is satisfactory and convenient.

3 Clubs are available as whole, as well as in two-section and three-section combinations. The combination club is easy to carry, but when purchasing, pay attention to whether the screws in the connection part are concentric and whether they are not bent tightly after tightening.

4 The head bump (also known as the leather head) on the club*** will directly affect the effect of the shot. The bumper is made of leather or synthetic materials that have been processed and is an important part of a direct impact with the ball. Therefore, although the headbump is small, its important role in hitting the ball must not be ignored, and it will often fail due to a problem with the head.

When the bump head has been used for a certain period of time, it is necessary to check whether the surface is calendered and slippery due to frequent impact, and it is necessary to use an abrasive cloth to polish the surface out of the stubble to increase the friction control force to prevent the slide bar from making mistakes. The commercially available club head is a disc with flute corners that must be trimmed before it can be used after being glued to the clubhead. The horns need to be sanded with sandpaper to make a half-moon shape, so that they can be in good contact with the outer surface of the ball.

Farewell to Xicheng Mo.

Farewell to Xicheng Mo.

Farewell to Xicheng Mo.

Farewell to Xicheng Mo.

Farewell to Xicheng Mo.

Farewell to Xicheng Mo.

Farewell to Xicheng Mo.

Farewell to Xicheng Mo.

Farewell to Xicheng Mo.

Billiards: Basic rules of popular science, novices must watch!

The center of gravity of the thru-rod is better than that of the truncated rod The truncated rod is easy to carry but easy to bend.

The four or three are easy to carry, but after a long time, the interface is easy to break, and there is no problem with a single section, but it is not very convenient to carry.