The CAD layout window cannot be selected

It is not possible to choose what is going on in the model space in the CAD layout".

There are two types of workspaces (states) for layouts - Model Space for layouts and Paper Space for layouts.

A layout is a printed drawing. The so-called layout is to arrange the printed content on the printed paper, and how the individual graphics are arranged on the drawing. You can set up several different viewports in a layout.

A viewport of a layout is a print area on the paper. Each viewport can be plotted at a separate scale and without interfering with the other viewports.

Layout workspace switching: Double-click inside the layout viewport to enter the model space of the layout, and double-click outside the layout viewport to return to paper space. When you enter model space for a layout viewport, the edges of the viewport become thicker, and when you fall back into paper space, the edges of the viewport become thinner.

You can also click on "Drawing Model" at the bottom to switch toggles. The layout contains two types of workspaces, so don't get confused. In the layout of the paper space, you can arrange printers, adjust viewport positions, picture frames, and so on.

In paper space, the drawing does not belong to the model space and is only recognized by the printer. The paper space of the layout is the sheet itself. In paper space, the maximum size is the size (in millimeters) that the printer can print.

Drawings in paper space that do not belong to the model space, but belong to the paper space, are only recognized by the printer.

The model space of the layout is the same as the drawing model space, and the drawing of the model space in the layout is the same as the drawing of the normal model space. The dimensions drawn in model space are the actual dimensions of the model. Both spaces can be drawn, but the results of plotting and measuring are different.

In paper space, the length of the drawing is the length and width of the drawing, and the length and width of the printed paper. In the model space, what is drawn and measured is the actual length of the building model.

To set the print scale, you must set it in the model space of the layout. Set the print scale first, and then adjust the print range. Return to paper space after adjustment.

There are two types of space for layouts – paper space and model space. Drawing in the model space of the layout is the same as drawing in model space. Paper space drawings in layouts are viewports of layouts, loaded frames, etc., and are only used for printing (not necessarily).

Drawings in the paper space of the layout have no relationship with those drawn in model space.

Double-click inside the layout viewport to enter the model space of the layout viewport. Viewport edges thicken. At this point, you are working in model space.

Double-click outside the layout viewport to return to the layout's paper space (viewport edges are thinned).

You can also click the option below the window to switch workspaces. Note that the two places have different roles. The Sheet Model option below is just to toggle the two working states of the layout.

You created a new small viewport on top of the original layout, and it happens that your viewport is built on top of the original viewport. As soon as you leave the small viewport, you can't enter.

Why: Every time you double-click activates a large viewport, you can't get into a small viewport.

Solution: You double-click outside all viewports, leave all viewports, select the large viewport and move it away with the move command, adjust it in the operation of the small viewport, and finally, move the large viewport back!

The viewport in the CAD layout can't move, and the selection is caused by the wrong setting, the solution is:

1. Select the viewport, right-click on the empty pants, and click Show Lock, as shown in the figure below.

2. After that, the viewport is locked, double-click to enter the viewport to change, and you don't have to worry that the ratio of the viewport will change, as shown in the figure below.

<>4. Select the viewport, and in the property bar, you will see that the display is locked, and it is currently displayed whether it is.

5. Adjust the display lock to Yes, and the viewport lock will be adjusted, as shown in the following figure.

Open the Graphics Properties tab, check to open the macro closed or frozen layer, and then select, you can see the viewport box, after checking, you can see which layer the viewport box is, after closing the layer, you can't select it, open the layer and you can carefully display and move the operation.

Summary. 5. Select the "Device" option, and then click the "Text" function at the bottom.

6. You can use the inside; Single-line text, multi-line text, property definitions to operate. Click "Text Styles" on the right to add and remove text styles.

7. Don't forget to click Save when you're done.

We all know that the space of CAD software is divided into model space and layout space, there is only one model space in a CAD drawing file, and there can be more than one layout space, and the graphic objects in the model cannot be selected in the layout.

What should I do if the drawing in the CAD layout cannot be selected?

1.Install and double-click to open the CAD software, and you will see an initial interface of the software. 2.

Click on the "Slip Servant Xiao Open" button in the upper left corner of the software. 3.There will be an "Open" window, which has CAD files that can be opened, select the CAD drawing file to open it, click on the following:

Turn on the button. 4.In this way, the drawings are opened smoothly in the software.

The annotations in Tianzheng cannot be modified.

5. Select the "Device" option, and then click the "Text" function below. 6. You can use the inside; Single-line text, multi-line text, property definitions to operate. Click "Text Style" on the right to add Qi Li judgment and delete text style.

7. Don't forget to click Save after completionWe all know that the space of CAD software is divided into model space and layout space, there is only one model space in a CAD drawing file, and there can be more than one layout space, and the graphic objects in the model can not be selected in the layout.

In **? Open the list of tools In the options bar, open the Tools drop-down list. 2 4 Enter the device page in the list of tools next to the work, and enter the "blocker" page. 3 4 Select the block to determine the selection block of the tomb, click "OK". 4 4 Enterer Enterer, Mess Beam can be carried out on the block.

The toolbar could not be found.

Point tool.

The source is caused by a setup error, and the workaround is:

1. The computer opens the CAD, but the frame selection drawing cannot be carried out.

2. Click Tools in the menu bar.

3. Then click on Options.

4. After entering the CAD options, enter the selection page.

5. On the selection page, hold and drag to deselect, and check the hidden window.

6. Press and hold and drag to deselect, and after the hidden window is checked, you can select the box.

CAD software in the layout BAI

The DU method for the selected graph is as follows:

The first zha: place the mouse dao

Move to the layout edge first.

Any position in the back box.

Second: When the mouse pointer is in the frame, double-click the left mouse button, after double-clicking, the border will be bold, and the coordinate system logo will appear in the lower left corner of the border.

Third: At this time, when selecting the shape, you can select it.

The viewport in the CAD layout does not move to tell Zen, and it is not selected because of the wrong setting, and the solution is rough

1. Select the viewport, right-click, and click on the sock stool dust to display the lock, as shown in the figure below.

2. After that, the viewport is locked, double-click to enter the viewport to change, and you don't have to worry that the viewport scale will change, as shown in the figure below.

<>4. Select the viewport, and you will see the display lock in the property bar.

5. Adjust the display lock to Yes, and the viewport lock will be adjusted, as shown in the following figure.

The steps to solve the problem of unselected drawings in the CAD layout are:

1. Run the CAD on the desktop of the computer, then find the file in the menu properties above the CAD, click on the file menu bar, and then open the CAD drawing you want to operate in the folder.

2. Then find the format in the menu bar at the top of the page, then in the pop-up box, select Layer Management, and then click Activate the layer.

3. Then a window will pop up on the page, in this window, you can click the Freeze Layer option in front of the layer you need to unfreeze, and then you can select the layer.

Point the graph to double-click, or rinse to create an MV shortcut.

In the layout of CAD2020, in the same viewport, some graphics can be selected, some graphics cannot be selected first, here is a switch to select a cycle, you can try it.

You have to enter the viewport to adjust it, MS enters the viewport, Z is adjusted to a proportional range, and PS locks the viewport.

Double-click on the inside of the layout to enter the layout, double-click on the outside of the layout to come out, and then "undo" if you can't get out.

The CAD layout drawing can not be selected may be because your CAD layer is locked or frozen, so you can't operate, step 2: the image on the drawing can not be selected, then find the format in the menu file at the top - layer management, and then directly click to activate the layer.

Step 3: After entering the pop-up window, we can see that many layers are displayed and frozen, and such layers cannot be erased. We only need to click unfreeze the frozen layer in front of the layer we want to make, and then we can select the layer on the drawing.

1. In the layout window, except for the line drawn in the layout window, other things cannot be selected or modified.

2. What should I do if I need to modify, one is to double-click in the layout window, which is equivalent to entering the model window, and you can modify, and the other is to return to the model window and find the position to be modified.

The viewport is locked. Select the viewport box, Properties—Show Viewport Lock—Enter Viewport Sheet—Lower Right Toolbar Unlock, and you're good to go.

Create a new one, double-click in the layout, select all of them to copy, modify, and save.

I'm sorry, I'm not very clear about this question, so I don't know either, I hope you can get a satisfactory answer, I wish you all the best, bye.