The computer won t turn on, and it seems that there is a problem with the motherboard

Updated on number 2024-04-16
26 answers
  1. Anonymous users2024-02-07

    You must be a problem with the system, there may be a virus, you can kill the computer with anti-virus software, or reinstall the system, my computer also encountered this kind of problem, and then I will kill it again, there is also a possibility that there is too much software installed on your computer, the system is running a little slow, you can delete some of your unwanted software, this must be a software problem, because your hardware has been replaced, the software problem is easy to solve, you can try it.

  2. Anonymous users2024-02-06

    Connected solutions

    Dude, don't guess! My motherboard is GIGABYTE GA-K8VT800, and I have a problem with you! Just solved!

    Hurry up and replace the motherboard problem, if there is no insurance, I will replace it back, we have a problem, it is really connected with the same disease!!

    I'm better than you, I can usually open it once in five or six clicks, and I usually don't turn it off! Ha!

    I went to test the maintenance and didn't say anything, just said what wire had to be connected, and said that it would be good to weld it for me, let me put it there, I found someone to replace it with a new one, and the other hardware was not replaced, and it was good to replace it at that time!

    My friend said that this situation can be the computer taken out of the indoor and outdoor temperature difference caused by a short circuit somewhere on the motherboard, or the dust is too large to cause a short circuit, he said that there are also metal elements in the dust accumulation more easy to short circuit, I guess it is dust! Take something to blow soot, but if there is a possibility of a short circuit after a short circuit, it is recommended to change it to a new one!

    My buddy said that it is possible that the CPU and the motherboard are not compatible, and it can also cause it to not boot! But if the Gigabyte board is paired with AMD, it can't be incompatible!

    Also, did you have a blue screen when you turned it on? My machine always has a blue screen, have you troubled the memory? Depending on what you said, the memory is not plugged in properly, or incompatibility can also cause this situation!

    You eliminate the memory first, and let someone else borrow one! If you don't change it again, you won't be embarrassed if you get it right!

  3. Anonymous users2024-02-05

    Since it can be turned on,It's generally not a problem with the motherboard,It's an external hardware problem,You see,When you turn on,Is there any display,If there is nothing on the display,It's generally memory,If it's two memory,Which one you pull out first,Try to boot and change to another slot with a memory。 Let's try it yourself!!

  4. Anonymous users2024-02-04

    You've unplugged all the hard drives. Only leave the motherboard, memory, CPU, graphics card, these are easy to open, if not, change the power supply to see if it can, mainly to see if these large pieces can be.

  5. Anonymous users2024-02-03

    You check the switch again. Remove the switch and short the power on. There are also systems that will cause no display when booted. If it doesn't work anymore. That would have to replace the motherboard.

  6. Anonymous users2024-02-02

    I've also encountered this problem, I just replaced a motherboard, the old motherboard was bought by a person, he said it can be repaired, you can go to repair the motherboard first, just take the motherboard.

  7. Anonymous users2024-02-01

    What is the reason for this situation - there are too many parts on the motherboard, and the critical bad one is like this!

    It's too difficult to repair personally!

    What other good detection methods are there - use the motherboard diagnostic card!

  8. Anonymous users2024-01-31

    The coms circuit is faulty! Can refresh the BIOS! Or! Measure the voltage value of the components next to the CMOS circuit!

  9. Anonymous users2024-01-30

    You can try to reinsert the memory card again, which was the case with my classmate.

  10. Anonymous users2024-01-29

    That goes for warranty or gets a new board.

  11. Anonymous users2024-01-28

    Changed the power supply and did not

    You try changing the power supply once

  12. Anonymous users2024-01-27

    This is not necessarily, it depends on the actual situation, if the boot display screen is black, it may be a motherboard problem or a memory problem, if you plug in multiple memories and unplug them, try them one by one, if you only plug in one memory, you unplug the graphics card, plug it into the onboard graphics card and try, if it still doesn't work, you can be sure that it is a problem with the motherboard, you see if the motherboard capacitor is bulging.

  13. Anonymous users2024-01-26

    If the computer can't turn on, it may also be a problem with the motherboard, but you still need to replace the accessories to detect it, first of all, you need to rule out the display, if the display can be lit on other computers, then you need to replace the accessories to detect the hardware problem.

  14. Anonymous users2024-01-25

    Yes, if the computer can't be turned on, it is likely to be a problem with the motherboard, but if it is a problem with the motherboard, is there any need to repair the computer? It's best to just replace a host directly. Because the motherboard** is very expensive.

  15. Anonymous users2024-01-24

    There are many reasons for this:

    For example, faults in the motherboard, switching power supply, CPU, memory, graphics card, hard disk, system, etc., will cause the computer to fail to boot.

  16. Anonymous users2024-01-23

    If you can hear the sound of the fan, it is likely to be a problem with the memory module, or a problem with the hard disk, or a problem with the motherboard.

  17. Anonymous users2024-01-22

    If the computer does not turn on, it may be a problem with the motherboard, because if the motherboard is broken, then it will not be able to turn on.

  18. Anonymous users2024-01-21

    Yes, the motherboard is very important, connect the parts, once it is broken, it will definitely not turn on, you can insert a diagnostic card to distinguish.

  19. Anonymous users2024-01-20

    There are many reasons why the computer cannot be turned on, such as a bad power supply, poor contact of the memory module, etc., and a problem with the motherboard can also be one of the reasons why the computer cannot be turned on.

  20. Anonymous users2024-01-19

    If it can't be melted, the power supply problem is the most likely, followed by the motherboard problem. If it doesn't show up, there are most problems with the memory and graphics card, and then check the motherboard problem.

  21. Anonymous users2024-01-18

    The computer can't turn on, is it possible that the motherboard is the problem, the computer can't turn on many of the problems are likely to be the motherboard of the host is broken, or it may be a problem with the monitor.

  22. Anonymous users2024-01-17

    There are a lot of problems that the computer can't turn on, and one of the reasons is likely to be a problem with the motherboard.

    Motherboards are very fragile, and if something goes wrong, it can cause all sorts of problems.

  23. Anonymous users2024-01-16

    If the computer can't turn on, is it possible that there is a problem with the motherboard, or there are many reasons for this, and it is best to say that you can go to the after-sales service hotel repair shop to see what the cause is. After all, there are many reasons for him, and it may be the reason for Zhuji, or it may be the reason for the electric board.

  24. Anonymous users2024-01-15

    The biggest possibility that the computer will not turn on is the power supply and motherboard failure.

  25. Anonymous users2024-01-14

    There will still be possibilities.

    Since you ask like this, it is speculated that you are not a professional, so it is recommended to go to a special repair station to check it, after all, the data of the hard disk is the most important, and it will not be deceived by maintenance profiteers.

  26. Anonymous users2024-01-13

    If you can't even get a black screen, it's likely to be a problem with the motherboard.

    Some people generally press the power to turn off. It's easy to burn the motherboard.

Related questions
16 answers2024-04-16

MSI motherboard cannot be turned on for self-check, the lower right corner A2 is stuck, this situation occurs because the motherboard's chip is burned out, and the motherboard chip is damaged because it is usually caused by illegal shutdown or sudden power failure, replacing the motherboard chip can solve this problem, the specific operation steps are as follows: >>>More

13 answers2024-04-16

If you can't enter the system all the time, press the F8 key when trying to boot the computer and select the last correct configuration or safe mode. >>>More

14 answers2024-04-16

Prompt did not find the startup item, that is, did not find the hard disk or optical drive, at this time it should be not found hard disk, boot into the motherboard interface is not found hard disk so can not enter the system, the possibility is that the hard disk is damaged or not plugged in, you can try to re-plug the hard disk power cord or replace the data cable to solve, after excluding the data and power cord is intact or can not find the hard disk, it may be that the hard disk is damaged, listen carefully to whether the hard disk has the sound of hardware turning and stuck. In addition, the smell of power paste may be that the power supply is burned, and some power supplies can operate normally after burning some integrated circuit boards or capacitors. Finally, the possible correlation is that the power supply burns out and burns the hard drive, hopefully not.

12 answers2024-04-16

The English meaning is as follows:

Updating ESCD (ESCD stands for Extended System Configuration Data, which is actually the previous device resource allocation table that the BIOS retains. This step is no problem by stating that the BIOS configuration is fine). >>>More