Do you have a Siemens washing machine at home? Is it as harsh as an electric drill when dehydrated?

When the Siemens washing machine is dehydrated, because the speed is relatively high, the friction between the drum and the air at high speed will make a whistling sound similar to that of an airplane, which is normal unless you reduce the speed. And it's not that difficult, as long as you turn the speed down a little bit during laundry, it doesn't have this sound. Or simply buy an 800 rpm model, ** is still low.

Some people will say that whoever owns the domestic washing machine does not have this sound. Then I'll tell you, then their speed is the result of false marking, if they really dare to design the speed to be so high, it is estimated that the bearing will fall apart long ago.

This is a paradox, you can't have it both ways, and it's up to the user to make a choice based on their own situation. Therefore, Siemens will respect this choice of users. We also follow this principle in the service, as long as the user is not satisfied, even if it is just a feeling, we will give the user a refund.

I think there is a harsh sound like an electric drill, then there must be something wrong Siemens is a good brand in my impression, if it is like the landlord said, it makes my impression of Siemens greatly reduced.

My home is also a Siemens washing machine, and when I dehydrate, it is also a sharp sound like this electric drill, and I always feel that the machine is wearing out, and my heart hurts

My house is fully automatic.

There's no voice like you say.

The dehydration sound is low, and the drying sound is loud.

If you buy something wrong, how can there be a sound.

There is no screeching sound.

I would have liked to buy Siemens, but that's not reliable. A sound like an electric drill, who can stand it. What model did you buy? How loud is it?

Siemens gives me the feeling that the price is high and the quality is high in household appliances, and it turns out that there are such and such problems!

There is no harshness like an electric drill, you can go to the after-sales service and ask.

If the dehydration noise is a high-frequency sound similar to the sound of an aircraft engine, it is normal It is the sound of Siemens' high-speed series motor The carbon brush friction will have this special sound The fuselage is not placed flat and is easy to shake There is also a sound is the sound of the drainage pump If the sound is particularly harsh, it may be that the belt of the dehydration motor is loose or the bearing is broken.

There is a certain standard for the noise control of the washing machine when it is manufactured, if the motor is working with a lot of noise, it means that there is a problem with the machine, and it is OK to call the corresponding maintenance service.

It seems that this kind of washing machine is like this, and so is my family. The neighbor's Panasonic is also a problem with the high-speed motor, which is particularly loud above 900 rpm.

Maybe it's not in a stable position.

Sometimes the foam underneath the newly bought washing machine has to be removed.

Call the appropriate repair service**.

The cleaning procedure is as follows:

1.Unplug and turn off.

2.After the sponge is dipped in neutral detergent, wipe off the limescale inside and outside the sink, and then scrub it with a rag, and the thin seam edges can be brushed with an old toothbrush.

3.Gently remove the batting filter, reverse the inner surface, and brush it with an old toothbrush under the faucet.

4.The shell and operation keyboard part of the body should be wiped with a wrenched rag and an old toothbrush diluted with neutral detergent, then wiped clean with clean water, and dried as soon as possible.

5.Remove the plastic hose that connects to the faucet and wipe the nozzle and surface with an old toothbrush.

Washing machine disinfection method.

The inside of the washing machine looks very clean at first glance, but there is a sleeve outside the washing cylinder, and the laundry water flows back and forth between these two mezzanines, and over time, a large amount of dirt will be attached to the mezzanine. These dirts not only seriously pollute the clothes during laundry, but also endanger human health. Therefore, we need to wash the washing machine frequently and disinfect it.

Generally speaking, a newly bought washing machine should be cleaned and disinfected every two or three months after it has been used for half a year.

The washing machine with non-metallic liner is filled with an aqueous solution containing 300ppm and 500ppm (ppm is one part per million) of available chlorine, which is turned on for 3 minutes and drained after 5 minutes.

Soak the metal liner in the glutaraldehyde solution for 10 minutes and drain it after 15 minutes.

Since mold is very sensitive to temperature, the survival rate in 35 water is very low, and almost zero in 45 hot water, so washing with 45 hot water can also effectively kill mold.

Cleaning precautions for washing machines.

1. Store in a relatively ventilated and dry place, avoid storing in the bathroom.

2. The lower drain must be higher than the drainage pipe, and the water cannot remain in the drainage pipe.

3. When not in use, take off the filter bag and dry it outside, so that it can be fully dried.

4. Take out the clothes to dry immediately after washing, and don't get stuffy in them.

5. After washing clothes, be sure to drain the water in the washing machine and open the lid to dry, so as to avoid the residual water forming a breeding ground for microorganisms in the machine.

6. It is best to flush the drainage pipe with clean water after each use.

7. After the washing machine with the top door is used, the water inside it should be wiped dry with a dry rag, and the washing machine with the side door should also be wiped dry with the water embedded in the gasket at the door to avoid breeding mold.

When you buy it, you should try it, and if you can replace it, you can replace it.

The details are as follows:

1. The maximum capacity of each program has been marked in the function table of the washing machine manual, and the maximum capacity that can be placed in different programs is different, and when the maximum capacity is exceeded, it will cause loud noise.

2. There are 4-5 packing bolts on the back of the drum washing machine to prevent internal damage due to bumps during transportation. Therefore, the packaging bolts must be removed before using the machine, otherwise there will be excessive vibration.

3. The bottom foot of the washing machine is unbalanced, which will affect the operation of the washing machine and cause excessive vibration. Therefore, it is necessary to level the feet of the washing machine to ensure that the washing machine is placed smoothly.

4. If there are metal zippers and buttons on the clothes, they will also make noise when they rub and collide with the inner cylinder during the washing process. Therefore, if you turn your clothes over and put them in the washing machine before washing, you can also effectively reduce the noise of laundry.

5. Contact professionals for on-site maintenance.

It is normal for Siemens to use the "carbon brush motor", and the so-called carbon brush motor is a motor with the same principle as the motor used in electric transfer. The sound you are talking about is made by the friction between the carbon brush and the rotor, this kind of motor is more durable and has a long life, the only bad thing is that the life of the carbon brush is generally 4 to 5 years, and the total cost is between 60-90. That's what I'm fixing.

Check that the washing machine is placed horizontally and that there is no excessive or uneven laundry when dehydrated.

Is your appliance grounded?

We've got a little swan here, and it's a similar situation, and on the third floor, we can multi-purpose dehydration with accompaniment.

But it's quiet on the first floor.

Look at the back iron shell with wire grounding.

It is a problem with the motor, it is recommended that you change the machine, because the motor is spinning at high speed when it is dehydrated, and there are two bearings in the rotor of the motor, and the quality of the bearing is not good, which is easy to cause the motor to be overloaded, and high-frequency harsh noise, as you said.

Even it is recommended that you dare not decide, but even often deal with noise motors hehe.

Quality problems, these merchants, the money has arrived, they will ignore you. It is always us who are hurt. Whining.

Where do you get 65-80 decibels will damage the cardiovascular system, nonsense, you can talk to about 70 decibels, say this, don't say anything, let alone go to the movies, just find a soundproof room to help you close the inside.

Dehydration is 3-5 minutes and will not affect you much. The washing machine is usually in the bathroom, close the door, and immediately reduce it to about 20 minutes. Generally, household vacuum cleaners have 60 to 70 points.

When dehydrating, you need to lay the clothes flat, and only when you maintain your balance can the washing machine dehydrate the clothes quickly and well.

Siemens washing machine dehydration is very noisy reasons and treatment methods:

1. The installation of the washing machine is uneven, and the automatic washing machine is more important, so be sure to choose a flat ground and adjust the horizontal position.

2. The motor bearing or transmission shaft bearing is seriously worn or broken, and the gear of the gearbox of the automatic washing machine is faulty. Lubrication is required. If the damage is severe, the firmware needs to be replaced.

3. The pulley rubs against the belt, and the deformation of the pulley rubs against the bottom of the laundry bucket.

4. The dehydration bucket touches the outer box and needs to be adjusted.

5. The sealing ring on the transmission shaft is too tight and needs to be adjusted.

6. The fasteners of a certain part are loose and need to be reinforced.

7. The balance boom of the automatic bucket washing machine is out of balance, and the spring should be replaced or adjusted.

1. Check whether there are any of the following conditions when the washing machine is dehydrated

1.The washing machine is not placed in an unstable position;

2.unbalanced placement of clothing;

3.Broken hook springs in washing machines;

4.Washing machine shockproof click foam bracket damage;

5.If it is a drum washing machine, there is also a possibility that the drum bearing is damaged;

6.Whether all the fixing bolts of the washing machine are removed;

7.Check whether the bottom corner of the washing machine is leveled;

8.The washing machine is caused by damage to the wall of the dehydration bucket.

Second, the washing machine dehydration sound ratio solution:

1.The position needs to be placed correctly, and the washing machine should be placed smoothly, vertically and horizontally;

2.Then there is the imbalance of the four booms inside the bucket, the spring elasticity is inconsistent, and it should be carefully adjusted. If there is a strap on the upper part of the bucket, the strap is too loose, and the spring elasticity will decrease, which will also cause the vibration to increase when gluing.

This needs to be adjusted manually by hand.

The specific causes and treatment methods of the vibration and noise of the dewatering bucket are: (1) There are debris between the dewatering bucket and the washing bucket. Just remove the clutter.

2) The balance ring of the dewatering bucket is ruptured or leaking, so that the balance of the dewatering bucket is lost when it rotates. Just replace the balance ring and it will solve the problem. (3) The fastening screws of the flange of the dewatering bucket are loose or broken.

Just tighten or replace the flange. (4) The dehydrated bearing is seriously worn or loose. Simply tighten or replace the dewatered bearings.

5) The elasticity of the boom is uneven. (6) The clutch spring needs to be replaced and the belt tightened.

Please check for yourself.

How long have you been buying? The reducer is broken.

1. All of them should be caused by the friction of the motor bearing, it is estimated that your clothes are unevenly placed, and it may also be that the bearing of the washing machine is aging.

As long as it's working, it's fine.

Probably:

1.The sound of the belt slipping.

2.There is a foreign substance between the inner cylinder and the outer barrel, and the sound of the foreign object scraping the inner cylinder.

Add some lubricating oil between the shaft and the leather bowl and you're good to go.

Isn't it just used, there are 2 or 4 big bolts in the back, and you have to remove them before you can use them.

For new machines, it is best to call after-sales service for on-site installation, and you will not be charged money anyway.

is normal, as is the case with any washing machine. Thank you for adopting.

There's a drain at the bottom, isn't it time to clean it?

After-sales service is required for door-to-door installation, because there are several rubber sleeves that fix the drum to be removed!