What is the proportion of sand and gravel concrete? What is the ratio of stone to sand in concrete?

Concrete strength: C20, slump.

35-50mm, sand type: medium sand, preparation strength, the maximum particle size of the stone is 40mm, and the cement strength is 32Level 5, dosage per cubic meter; Cement 331kg m3 Sand 656kg m3 Crushed stone 1218kg m3 Water 182kg m3 Mix ratio; 1：：

This is the case of sand and gravel moisture content of 0, the general on-site purchase of sand and gravel has a moisture content, in the sand is generally 3%-5% and gravel is generally 1%-2%, and the specific materials are subject to the actual purchase of materials through the testing station testing, and then adjust the content ratio of sand and gravel and water, which is generally the case. Extended Information Strength Grades of Concrete.

Refers to the compressive strength of concrete. According to the "Concrete Strength Inspection and Evaluation Standards".

GB T 50107-2010), the strength grade of concrete should be determined according to the standard value of its cubic compressive strength. The symbol c is used with the standard value of the compressive strength of the cube (in n mm 2; or MPA). In accordance with GB50010-2010 "Code for Design of Concrete Structures".

It is stipulated that ordinary concrete is divided into fourteen grades, namely: C15, C20, C25, C30, C35, C40, C45, C50, C55, C60, C65, C70, C75, C80. For example, a concrete with a strength grade of C30 refers to a 30MPa FCU<35MPa that affects the strength grade of concrete.

The factors are mainly related to the cement grade and the water-cement ratio.

aggregates, age, curing temperature and humidity, etc. : The strength grade of concrete.

: C25 Mix Ratio: Cement:

Sand; Stone:water = 1:::weight ratio) Material dosage (kg m3):

Cement: 415kg; Sand: 583kg; Stones:

1184kg；Water: 195kg

The mass ratio is usually around 11:7. That's all I can say...

The ratio of cement is 1, stone is 3, and sand is 5

Summary. One side of concrete requires cubic meters of stones. The ratio of sand to gravel on the market is different at present.

At present, most of the specifications used are: one cubic meter of concrete requires about 700 kilograms of sand, about 180 kilograms of water, and about 300 kilograms of cement.

What is the proportion of concrete on one side, how much sand is there and how many stones.

One side of concrete requires cubic meters of stones. The ratio of sand to gravel on the market is different at present. Most of the specifications used today are:

One cubic meter of concrete requires about 700 kilograms of sand, about 180 kilograms of water, and about 300 kilograms of cement.

How many standing stones, how much standing sand, how many bags of cement are needed?

If it is C10 concrete, one cubic meter needs about 1245kg of gravel sand and 235kg of cement. If it is C20 concrete, one cubic meter needs about 1265kg of gravel sand and 335kg of cement. If it is C25 concrete, one cubic meter needs about 1285kg of gravel sand and 375kg of cement.

I want a cube.

Hello, I'm talking about cubes too.

The cubic is not the kilogram.

Nowadays, this specification is mostly used: one cubic meter of solid concrete requires about 700 kilograms of sand, about 180 kilograms of water, and about 300 kilograms of cement. At this time, the density of sand is generally one cubic centimeter gram, and the density of stone at this time is one cubic centimeter, and the sand required at this time is about cubic meters.

The stone needed is cubic meters, that is, about half a carton of sand that we usually use.

How many bales is 375kg of cement?

Hello! The top is the cube.

C15 concrete mixed and poured on site is prepared with No. 325 cement, 5 40mm stone with particle size and medium sand: 202kg of water, 331kg of cement, 639kg of sand and 1238kg of stone.

C20 concrete with No. 325 cement, 5 40mm stone with particle size and medium sand is prepared and poured on site: 203kg of water, 390kg of cement, 585kg of sand, and 1240kg of stone.

C30 concrete mixed and poured on site is prepared with No. 425 cement, 5 40mm stone and medium sand: 204kg of water, 434kg of cement, 583kg of sand and 1254kg of stone.

Concrete precautions.

In the process of concrete entering the mold, it is forbidden to gather and dump the impact formwork or steel frame, especially when the pouring height is 2 meters, it is necessary to use string or slip pipe to cut the material. In addition, in the process of pouring beams and slabs, the beams need to be poured first, and the beams and columns should be started, and then the slurry method should be used to pour them in a circular manner, but no cold joints can occur.

In the process of pouring and standing concrete, due to the subsidence and dry shrinkage of the concrete mixture, it is easy to produce non-structural cracks on the surface of the concrete and the upper part of the stirrups, especially in hot, dry, windy and other weather. Such cracks must be applied to the surface of the component a second or third time before the final setting of the concrete to avoid such cracks.

Summary. Concrete, cement, gravel, and sand are as follows:

First, the ratio of C15 concrete, cement, sand, stone and water is 1:::: Second, C20 concrete, the ratio is 1:::: Third, C25 concrete, the proportion is 1:::

Fourth, C30 concrete, the ratio standard is 1:::

What is the ratio of concrete sand to gravel cement?

Hello, I am the encyclopedia Qiqi, I am happy to answer for you<> concrete cement gravel sand match as follows: 1. C15 concrete, cement, sand, stone and water ratio is 1:::2, C20 concrete, the ratio is 1:::

3. C25 concrete, the proportion is 1:::4, C30 concrete, the ratio standard is 1:::

Summary. Hello, the ratio of concrete to cement and sand in general is:

The ratio of sand, stone and cement in C25 concrete is::1.

The ratio of sand, stone and cement of C30 concrete is::1.

The ratio of sand, stone and cement of C35 concrete is: :1.

The ratio of sand, stone and cement in C40 concrete is::1.

When blending, the ratio of cement, sand and gravel must be appropriate, otherwise the quality of the concrete pavement will be affected. If the ratio is too low, it will cause sand to return to the road.

What is the ratio of cement to sand in concrete?

Hello, the ratio of cement and sand in concrete is: the proportion of sand, stone and cement of C25 concrete is: the proportion of sand, stone and cement of concrete is: :

The ratio of sand, stone and cement of concrete is: :The ratio of sand, stone and cement of concrete is::

1。When blending, the ratio of cement, sand and gravel must be appropriate, otherwise the quality of the concrete pavement will be affected. If the ratio is too low, it will cause sand to return to the road.

Concrete should actually be "concrete". Concrete, abbreviated as "concrete (tóng)": refers to the general term for engineering composite materials that are cemented into a whole by cementitious materials.

The word concrete usually refers to the use of cement as cementitious material, sand and stone as aggregates; Cement concrete, also known as ordinary concrete, is widely used in civil engineering engineering by mixing, forming and curing cement concrete obtained by mixing with water (with or without admixtures and admixtures) in a certain proportion.

If I can help you, please give a like, this is very important to me, (rate in the lower left corner), look forward to your like, thank you, I wish you a happy life and all the best! <>

The ratio of sand and gravel in concrete depends on the required concrete strength and usage requirements, and generally needs to be designed on a case-by-case basis. However, generally speaking, the ratio of sand to stone in a general concrete mix is 1:2 or more.

Therefore, if it is necessary to make 1 cubic meter of concrete, the amount of sand and gravel can be calculated according to the following ratio:

Sand Usage: The amount of sand used in 1 cubic meter of concrete is 1 (1+ cubic meter.

Dosage of stones: The dosage of stones in 1 cubic meter of mixed spike concrete is 1 (1+ cubic meters.

628 kg of sand and 1275 kg of stones.

Cement: Sand: Water =

Content expansion: 1. Cement mortar is made of cement, fine aggregate and water, that is, cement + sand + water, and is prepared according to the needs of cement, fine aggregate, stone cavity ash and water. The two are different concepts, with different names and different uses.

Wu Jinjian. Second, the commonly said 1:3 cement mortar is with 1 volume of cement and 3 volume of sand matching, in fact, ignoring the composition of water, generally in the left and right ratio, that is, should become, the density of cement mortar is 2000kg m3.

3. The mortar used in the construction process, in order to facilitate the construction, is generally mixed on site, and the cement mortar mix ratio of 1:3 refers to the weight ratio, and then converts it into a volume ratio according to the capacity of the on-site mixer or material container; The mortar used in structural construction is mostly finished mortar, and the mortar is mostly expressed by the strength of the mortar, such as M5, mortar, etc.

What is the ratio of concrete, cement, sand, and gravel on the pavement?

The proportion of cement, sand and gravel is related to the quality and quality of the materials used; In concrete of different strengths, the proportion of cement, sand and stone will be different. For example, if 325 cement is used, the ratio of cement, sand and gravel in C25 is; Using 425 cement, the ratio of cement, sand and gravel in C25 is. In front of laying the cement floor, it is best to do a ratio test first.