How to take care of your refrigerator? How to maintain a refrigerator?

First of all, disconnect the refrigerator from power, and the next step is to defrost, you can put a bowl of hot water to melt the frost, but be careful not to use sharp tools for defrosting, because it is easy to damage the aluminum evaporator. Then use a clean cloth to wipe the refrigerator clean from the inside out.

When the refrigerator is deactivated, a piece of paper can be placed between the door seal and the refrigerator to avoid the door seal sticking to the refrigerator.

Set the thermostat adjustment to "0" to keep it in its natural state and prolong its lifespan.

When moving the refrigerator, pay attention to vertical and parallel movement, try to avoid tilting, and prevent the compressor from dragging the cylinder. Try to place the refrigerator in a ventilated and dry place away from direct sunlight.

Refrigerators have a low refrigerant freezing point, so it is not necessary to place the refrigerator in a hot place.

A refrigerator is a kind of refrigeration equipment that maintains a constant low temperature, and it is also a civilian product that keeps food or other items in a constant low temperature and cold state. Inside the box there is a compressor, a cabinet or box for ice making for icing, and a storage box with a refrigeration unit.

The volume of a household refrigerator is usually 20 500 liters. In 1910, the world's first household refrigerator with compression refrigeration came out in the United States. In 1925, the Swedish Lido company developed the household absorption refrigerator.

In 1927, the General Electric Company of the United States developed a fully enclosed refrigerator.

For refrigerators, the impact of the method of use on the life span is far greater than the so-called "maintenance". Therefore, our ordinary users do not need to work hard and spend money on maintenance, as long as they are used correctly, a refrigerator will not be a problem for more than ten years.

If we have to talk about maintenance, there is only one thing we have to do - clean the refrigerator frequently!

If the refrigerator is directly cooled, be sure to clean the ice from the inside frequently. Frost is a type of load for refrigerators, and remaining in the refrigerator will not only affect the power consumption of the refrigerator, but also have the potential to corrode the inner wall.

In general, the freezer should be thoroughly cleaned of frost every six months – and in addition, putting less watery food in the refrigerator can help reduce the rate of frost production.

Another place that is not very important, but very important, is the sealing strip - the sealing strip is mostly rubber products, and those soup water flowing into it will accelerate the aging of the sealing strip. The aging of the sealing strip will lead to non-stop operation of the refrigerator, increased power consumption, slow refrigeration speed, and poor thermal insulation effect.

Cleaning the seal is very simple, just use a regular rag to reach into the gap and wipe it. It's a good idea to keep a rag next to the fridge and wipe it whenever you want to remember.

If we want to extend the service life of the refrigerator, we need to pay attention to three issues when using it:

1.Move less.

Every time it moves, it is a test of the quality of the refrigerator - the cabinet refrigerator is not as good as the horizontal freezer, the structure inside it is relatively unstable, and it may be broken when it moves.

2.If you break less, you will be electrified.

There is no switch on the refrigerator and there is no undervoltage protection device. Every time you plug it in, the refrigerator starts directly – a big shock to the refrigerator's compressor.

Don't cut off the power for a long time, all the refrigerators that have been used must be used all the time. If the power goes off for a long time, the refrigerant remaining in the pipes will cause corrosion to the refrigerator pipes.

3.Pay attention to the startup frequency.

If the refrigerator compressor is stopped for a long time, the freezer will melt; If the starting frequency is too frequent, it is not good for the compressor, and it is not good for power consumption.

The best practice is to adjust the temperature of the refrigerator with the room temperature (the starting frequency of the compressor is related to the temperature difference between the set temperature and the room temperature), and set the temperature a little higher when it is hot (to prevent the compressor from starting frequently); When it's cold, set the temperature a little lower (to prevent the compressor from starting).