What should I do if the display is not displayed when I plug in the memory, but it is not displayed

You first look at the color of your monitor's indicator, whether it is orange or green.

1).If it's green, ask the question of the monitor.

2).If it's orange, it's a general question to ask the host:

1.The simple way to die is to unplug the main power supply and click the main engine switch 5 times. Turn on when plugged in. (Simple discharge).

2.Open the chassis and discharge the host, there is a jumper near the host battery, you can also unplug the battery, and try it later on it. (Discharge Again).

3.Unplug the memory and graphics card, if the host does not call the police, the host is finished;

The host called the police, and there was a rescue, trying to install the graphics card and memory back, but it couldn't be seen.

You can try them one by one, and if it's good, everything is OK

If you're unlucky, change the memory and graphics card, and test.

Your motherboard support is not supported if it is not supported by poor contact.

You can try it on your computer just with a 1G modern look.

It should be that your newly bought Hyundai and Kingmax are not compatible.

My computer also has both kingmax and modern memory. Can only run on DDR333Otherwise, it can't be started. But with a single KINGMAX, you can get to DDR400. With a modern single strip can only go up to DDR333

I guess it might be a compatibility issue. It's not broken.

Plug your modern memory 1G into the host alone, only plug in one, see if it can start, if it can't start, take the modern memory 1G to your friend's machine to try, if it can start, it is obvious that it is your motherboard compatibility problem, or it may be that your power failure causes a small error in the motherboard BIOS system, upgrade your motherboard's BIOS to the latest, there are currently new BIOS can generally solve the motherboard compatibility problem, if it can't be solved, it means that your motherboard has a problem, Power failure leads to the error of the motherboard control chip, this kind of problem to professional repair of the motherboard overhaul, in fact, it is not recommended to repair it if it is broken, repair to repair more problems, are the old motherboard sold, buy a second-hand old motherboard is 50 yuan, choose a first-line second-hand brand motherboard to get it,

What do we do when we find that we have added memory to our computer but it doesn't show up? Here's how I introduced the solution to the problem that didn't show up after adding memory to your computer, welcome to read it.

Right-click on the taskbar and click "Start Task Manager" to open Performance and check whether the total amount of physical memory has increased.

If you don't add it, check my computer properties to see if the system supports it, and the 32-bit system can only recognize about 3G of memory at most, and more than 4G can only use about 3G.

Open Advanced Options under System Configuration - Boot.

The maximum possible memory contact is poor, wipe the gold finger of these memories with an eraser and then install them or try to change a few more slots.

A memory module is a part of a computer that can be addressed by the CPU and can be read and written.

Memory modules used to be an extension of the main memory in the history of personal computers. With the continuous update of computer software and hardware technology, memory modules have become the whole of read and write memory. When we talk about the size of a computer's memory (RAM), we refer to the total capacity of the memory module.

Memory modules are an essential part of a computer, and the CPU can address the memory through the data bus.

Historically, computer motherboards had main memory, and memory modules were extensions of the main memory. Later computers will not have main memory on the motherboard, and the CPU will rely entirely on memory modules. All content on external memory must pass through memory in order to function.

The power light of the monitor is on but not displayed, which may be related to loose memory or oxidation.

The computer boot monitor does not respond,There must be a problem with the computer hardware,The most absolutely stupid to use the replacement method to eliminate the problem,Judgment method:

1. Press the upper and lower case on the keyboard. The light is on, indicating that the graphics card, monitor, and other hardware are faulty.

2. If the keyboard light does not light up, it means that it is a memory, CPU, motherboard, or power supply problem.

Solution: 1. If the keyboard light does not light up, first wipe the memory module with an eraser, and check whether there are burnt marks on the golden hand of the memory module and the fingers. Replace the memory in the slot.

2. Check the capacitors and resistors on the motherboard to see if the capacitors are bulging, whether there is a burning smell on the motherboard, and clean up the dust on the motherboard.

3. Remove the CPU fan, power on and turn on, test whether the CPU has a temperature change by hand, if not, the CPU is not working, either the motherboard is broken, or the CPU is not plugged in properly, and the CPU is re-plugged.

4. Power supply problem, although the power supply is powered on, but the motherboard can not work normally, replace the power supply and try it.

5. If the display card is loose or oxidized, the keyboard light will be on, the screen will not be displayed, wipe the gold finger of the graphics card with an eraser, and check whether the capacitance on the graphics card is bulging.

6. Minimize the test method, only leave the power supply, motherboard, CPU, memory, graphics card, keyboard, monitor, unplug all the wires on the rest of the motherboard, use a screw knife to short the switch pins, if normal, add the rest of the hardware, piece by piece, until the cause of the problem is found.