What happened to the Baume Mercier mechanical watch not winding

If the movement is faulty, it needs to be sent to after-sales service for repair. Most of the problems are the winding gear transmission mechanism and the mainspring mechanism.

It is recommended that you can open the warranty coupon attached to the purchase of the watch, under normal circumstances, there will be a service address on the warranty copy, or find a regular watch service center for testing and maintenance of the address of the store, etc., if there is a professional after-sales maintenance center nearby.

It is recommended to send it to the after-sales service center for testing and repair.

Room 2513, 25th Floor, Diwang Building (Shun Hing Plaza), No. 5002 Shennan East Road, Luohu District, Shenzhen, Guangdong Province] will answer for you.

A self-winding Baume & Mercier mechanical watch.

The self-winding Baume & Mercier mechanical watch has an eccentric balance wheel inside, which turns to a lower position under the action of gravity when the position of the watch changes, and is wound by a set of ratchet mechanisms, so as long as the watch is worn on the body, the person can wind it with a little movement. Most of these watches do not have a manual winding function, so they will stop when left unmoved for a long time, and the so-called winding is to keep the watch in constant motion, such as tilting the surface upwards and constantly tilting left and right.

Hand-wound Baume & Mercier watch.

For manual winding of Baume & Mercier's watch, the handle is pulled out, (there are two gears with a calendar, the first gear is the date adjustment, and the outer gear is the winding), and the handle can be wound by turning it in the clockwise direction, and it is full when it does not move. It is best to wind it almost regularly every day, and the action should not be too violent, as it will cause damage if you use too much force when it is full.

Automatic watches should be loved by most men, while women are overwhelmingly fond of small, beautiful and stylish watches. Automatic watches do not have the button batteries in quartz watches that we often see. To put it simply, we can understand the mechanical watch of the company as an upgraded version of the manual mechanical watch.

The biggest difference between an automatic watch and a manual watch is that an important part is added to its dial - the balance wheel.

Everyone should be very unfamiliar with the term 'balance', but it is actually very easy to understand. It is present in the dial, and when people wear the watch on their wrist, it can play a role in continuously winding the watch, through which the hour hand turns. And because of this special task, there are many taboos in the wearing of automatic watches.

For example, some people are not suitable for wearing; For example, there are some places where it is not suitable for wearing.

First of all, we can understand that the automatic mechanical watch relies on the movement of the wrist of the person wearing the watch to wind the gears in the center, if the person wearing the watch does not exercise for a long time, or the wrist friend key movement is insufficient, then there is not enough kinetic energy to convert into the energy of the watch. Therefore, sedentary people are not suitable for wearing.

Secondly, when wearing an automatic mechanical watch, you should avoid placing the watch next to magnetic fields or large household appliances. This is because the inside of an automatic mechanical watch is made up of a lot of precision parts, and these parts are all disturbed by magnetic fields. Therefore, when we wear an automatic mechanical watch, we should be careful not to expose it to magnetic fields or electromagnetic waves for a long time.

There is one more important taboo that deserves our attention. As I have said before, automatic mechanical watches do not have batteries, and they can operate normally, completely relying on the dial and the countless small mechanical parts in the case, and the most feared by this combination of mechanical parts is strong vibration! Any single shock can cause a part to fail, causing the entire automatic watch to 'strike'.

Summary. If the mechanical watch is not gone, it may be due to the failure of the mechanical parts inside the mechanical watch, or due to the low battery of the mechanical watch. First of all, you should check that the battery of the mechanical watch is sufficient, and if the battery is low, you can replace it with a new one.

If the battery is sufficient, it is possible that the mechanical parts inside the mechanical watch are malfunctioning, and the mechanical watch should be sent to a professional repair shop for repair.

If the mechanical watch does not go, it may be due to the failure of the mechanical parts inside the mechanical watch, or it may be caused by the battery power of the mechanical watch not being able to hold enough. First of all, the strap should check whether the battery of the mechanical watch is sufficient, and if the battery is low, you can replace it with a new battery. If the battery is sufficient, it is possible that the mechanical parts inside the mechanical watch are malfunctioning, and the mechanical watch should be sent to a professional repair shop for repair.

Excuse me, but please go into more detail?

Reason: The mechanical watch does not wind up may be due to the mechanical watch's gear set is contaminated or worn, resulting in the gear set not functioning normally, resulting in the mechanical watch not winding. Workaround:

1.Check the gear set of the mechanical watch, and if you find contamination or wear, you can clean the gear set with a detergent or replace it with a new one. 2.

Check the balance wheel of a mechanical watch and if it is contaminated or worn, you can clean it with a detergent or replace it with a new one. Personal Tips:1

Regularly inspect the gear set and balance wheel of the mechanical watch, find problems in time, and deal with the spring sail disturbance in time to avoid greater losses. 2.When using a mechanical watch, it is necessary to pay attention to protection to avoid contamination or wear, so as not to affect the normal operation of the mechanical watch.

Related knowledge: A mechanical watch is a mechanical device composed of a gear set and a balance wheel, which can convert energy into mechanical motion to achieve the function of timekeeping. The normal operation of a mechanical watch requires the normal operation of the gear set and balance wheel, and if it is contaminated or worn, it will cause the mechanical watch to not wind.

1. Watches with manual winding movements should be wound at the same time every day as far as possible so that the watch has enough energy to operate in the next 24 hours.

2. The energy of the watch with automatic movement is ** in the movement of the wearer's arm, so there is no need to manually wind it under normal wearing, only when the wearer's exercise is not enough to replenish enough energy to the mainspring, it can be compensated by manual winding, and the crown rotation is controlled within 20 laps when winding.

3. For a self-winding watch that has not been worn for more than 40 hours, the crown should be turned 20 times to reactivate the movement when worn again.

4. In order to prevent moisture from penetrating into the case and maintain the waterproof performance of the watch, please make sure that the crown is locked at all times.