Draw straight dashed lines with Photoshop CS2

Method Steps:

1. Open PS software and create a new layer.

2. Select Pencil Tool in Brush Tools in the left toolbar.

3. Click the Brush tool in the Window option in the upper toolbar.

4. Set the shape of the brush tip, the size, hardness and spacing of the brush tip.

5. Click a point on the canvas with the mouse, hold down the shift key at the same time, and click the second point, at this time, a straight dotted line will be formed between the two points.

Note: When setting the brush spacing, make sure that there is a gap in the spacing when previewing below.

First look at the picture, they are all drawn with a brush, and there is one in the brush selection attribute - the shape of the brush tip - there is a spacing in the selection card to choose one - as long as you mix it according to your needs.

The latter are used when the requirements are very high, and the disconnection is different from the black line, and the usage is almost the same, that is, to draw a solid, and then use the eraser to - brush tip state - angle roundness (set the pen tip to the top and bottom as a whole into an ellipse), and then choose which to set the property in the spacing.

Usually this is rarely used, and I think that I make dotted lines in AI or CDR, and if there are square or rectangular brushstrokes, it should look better than the garden brush.

I tried it just now, and it does look much better than the round.

In the toolbar, click on the Pen tool.

Hold down shift to draw a straight line on the page.

We are in the toolbar, click on the Brush tool, the Brushes panel appears, if it does not pop up, press F5.

We find "Brush tip shape" on the panel, find"spacing", and adjust the dotted line appropriately.

Let's go to the Paths panel and right-click on the Stroke Path.

Select OK in the pop-up dialog box, and the effect will appear.

Adobe Photoshop, abbreviated as "PS", is an image processing software developed and distributed by Adobe Systems.

Photoshop deals with digital images made up of pixels. With its many editing and drawing tools, you can work efficiently. PS has a lot of functions, which are involved in all aspects such as images, graphics, text, **, publishing, etc.

In 2003, Adobe Photoshop 8 was renamed Adobe Photoshop In July, Adobe launched a new version of Photoshop CC, and since then, Photoshop CS6 has been replaced by the new CC series as the last version of the Adobe CS series.

1. Open the PS software, [New] - create a new blank background**.

Set] The parameters you need to set. Select OK.

2. Select the foreground as red, and then select [Brush Tool].

3. Press F5 on the keyboard to bring up the [Brush Preset] page. Once you're in, start the setup. Select the appropriate parameters on the left side to see your own needs for Zen faith.

4. Select a square [pen head] on the right side, if you are drawing a dotted dot, then choose a round [pen head], as shown below.

5. Finally, set the lower spacing, if you want to be more dense, set 120% of the smile, and the normal setting is 150%.

6. Hold down the [Shift] key while drawing a dotted line, and then use the brush tool to draw a perfect dotted line.

1. Just a simple dotted line, let's introduce the dotted lines of different shapes. Create a new canvas, press u to select the shape tool, right-click the shape tool to select different shapes, we take the rectangle as an example.

2. We want to draw a rectangular box here, so select none in the filling.

3. Choose a solid color in the stroke.

1. First open Photoshop and create a new (Ctrl+N) canvas with 600*400.

2. Then select Window - Brush Presets to bring up the Brush Presets window.

3. Select the Brush tool, click the Brush Preset - select the Brush Tip - Sharp Corner Brush, select the tip size to 30 pixels, select the spacing to 180, press the shift key and click the left mouse button to draw a dotted line on the canvas.

4. It doesn't matter if the dotted line is very thick, adjust the size of the nib, the smaller the nib, the thinner the line drawn, and vice versa. You can also adjust the spacing, and the larger the spacing, the larger the spacing of the dotted lines, so you can try it together. So how do you draw a dotted line with ps?

6. Modify the shape of the nib to make different styles of dotted lines, which can be modified according to your needs and preferences. According to the information provided above, you can understand how PS draws the dotted line.

Note: The solid line and the dashed line depend on the size of the spacing, the larger the spacing, the more obvious the dashed line, and the closer the drawn line is to the solid line.

psHow to draw a dotted line, sometimes I think it's very difficult.,Actually, the brush spacing is a little bigger, it's the dotted line.,But some people say that it's all dots, not dots! So what should be used to draw the dotted line?

Method Steps:

Right-click on the "Rectangle Positive Argument Tool" next to the "Straight Line Tool" to find the "Line Tool" and click on the "Line Tool" selection.

If you don't select "Shape" in the front, select "Shape" first, and then use this tool to draw in an empty space, and you can find that it is now a dotted line.

Pen shape tool.

Drawing dotted lines with a pen or shape tool is the one I use the most and the most convenient. This method is suitable for drawing straight and curved dotted lines, and because it is vector, it is more convenient to adjust or modify later.

Start by drawing a shape using a pen or shape tool. Leave the shape selected, set the fill to None in the tool options bar, select white for stroke, and set the stroke width to 1 pixel. At the same time, click on the stroke option and select the dashed line style to draw the dashed line.

Dotted line making is often used in PS, and it is also necessary to learn to learn PS. Many novices don't know how to draw a dotted line, so how to draw a dotted line in PS?

Patterns are filled to make dotted lines

First make a 4x4 stroke**, select, define the pattern, so that you set up a custom pattern, then create a new file, use the rectangular selection tool to draw a marquee at will, select, then fill, select the custom pattern just now, make the effect, and then select the height of 2px, and the dotted line is made.

Use type on a path

respectively in a number of characters - and characters. Arrange along the path to form dashed and dotted lines. Similarly, it is possible to combine other characters to achieve different effects.

Use a paintbrush

Select the Brush tool in the toolbox, then press the F5 key to bring up the Brushes panel, find the right size square brush, adjust the spacing, and you can see the preview at the bottom. Once adjusted, drag and draw on the canvas, and if you need to draw horizontal or vertical dotted lines, you can hold down the shift key and drag again. Note that the color of the brush depends on the foreground color, so whatever color you need, set the color first, and then use the brush to drag and draw the dotted line.

All in all, there are many ways to draw dotted lines in PS, you can make dashed lines by adding patterns and filling, you can also use path text, or use brushes to make dashed lines, etc.

Use the text input tool and enter the [-] of the function key above to get Xu Xian; Or click the [Brush] tool, and in the preset panel of the brush, use the brush to hold down the shift key and drag the mouse directly; Using the Pen Tool is also possible to get a dotted line. Here's a closer look:

1. You can try to click on the text input tool, enter the [-] on the function key to get the dotted line you want, and you can adjust the spacing by changing the font;

2. Click the [Brush] tool, count the fifth tool button in the second row in the toolbox, and then open the brush preset panel in the upper right corner of the window, then set the brush, and directly use the brush to hold down the shift key in the layer and drag the mouse directly to get a straight dashed line, and the vertical drag is the vertical dashed line;

3. Use the pen tool, select the path with the tool attributes, draw a path, which can be a closed box, straight line or curve, and use the text tool to directly click on the path and enter "-" to follow along the path to form a dotted line.