The flute made a rustling sound

There are many reasons for this, and it is recommended that you find a teacher (due to my limited ability, there may be one or another deficiency, I hope you understand).

I analyze the following reasons:

First, the flute membrane is too loose.

The tightness of the flute membrane is a key factor in playing the flute well, and it is also a very important skill.

If the flute membrane is too tight, the sound of blowing is muffled and not brittle, and it sounds very unpleasant.

On the other hand, if the flute is too loose, it will make a rustling sound like you said, and.

The treble is hard to go up. Therefore, the flute membrane is a very important and difficult skill to master, not only to pay attention to the appropriate tightness, but also to pay attention to the horizontal lines of the flute membrane to be perpendicular to the flute......

Second, the tone is not strict.

Poor mouth style is a common problem for beginners, which is related to the tone and quality of the flute.

In response to this problem, it is necessary to practice regularly in life to solve the problem of lax mouth.

Third, the quality of the flute is poor.

The poor quality of the flute can also contribute to this phenomenon.

The quality of the flute is different, and the price is also different, as the saying goes: "Cheap is not good, good is good."

Not cheap. "Therefore, the price of the flute is different, and the quality is also different, generally 200-300 yuan.

The flute is better. In the beginning, about 100 yuan is fine.

However, the poor quality of the flute will not have much impact on the sound, and the main reason is that.

Flute membrane and mouth wind.

It should be that the flute film is loose, and as for the mouth shape, if you look for the feeling of blowing the pencil holder, it should be like this.

It is because the flute membrane is too loose, adjust the lips and stick the flute membrane a little tighter.

It may be that the flute membrane is sticky loosely, or it may be that the breath is scattered and unconcentrated.

It may be that the flute membrane is not tightly attached.

Summary. Dear, I'm honored to have your question The information that the teacher found for you here is: how does the flute make a sound; 1. The lips are naturally closed, hold both ends of the flute with both hands, hold the mouthpiece with the left hand, hold the tail with the right hand, place the blowing hole on the lower edge of the lip, and aim at the blowing hole to blow air.

2. When the breath rushes out, only a small gap is allowed to pass the breath, and it becomes a bundle of air columns that blow obliquely under the blowing hole. It works like blowing a pen sleeve. 3. In order not to flush the lips apart when the breath rushes out, and the breath is dissipated, the cheek muscles must be hard to keep the outlet of the breath small.

4. The sound of blowing out should be pure and avoid mixed with gas. 5. Practice often in front of the mirror, and adjourn how to align the pores, so that the pronunciation position is correct and impartial, so that all the breath is turned into flute sound. 6. If you can't blow at the beginning, don't be in a hurry, don't give up, practice a few more times, and you can blow it.

How does the flute make a sound.

Dear, I'm honored to have your question The information that the teacher found for you here is: how does the flute make a sound; 1. The lips are naturally closed, hold both ends of the flute with both hands, hold the mouthpiece with the left hand, hold the tail with the right hand, place the blowing hole on the lower edge of the lip, and aim at the blowing hole to blow air. 2. When the breath rushes out, only a small gap is allowed to pass the breath, and it becomes a bundle of air columns that blow obliquely under the blowing hole.

It works like blowing a pen sleeve. 3. In order not to flush the lips apart when the breath rushes out, and the breath is dissipated, the cheek muscles must be hard to keep the outlet of the breath small. 4. The sound of blowing out should be pure and avoid mixed with gas.

5. Practice often in front of the mirror, and adjourn how to align the pores, so that the pronunciation position is correct and impartial, so that all the breath is turned into flute sound. 6. If you can't blow at the beginning, don't be in a hurry, don't give up, practice a few more times, and you can blow it.

The following is a related extension, I hope it will be helpful to you: The flute is the oldest Han musical instrument discovered so far, and it is also the wind instrument with the most representative and ethnic characteristics of the Han musical instruments. One of the commonly used horizontal blowing woodwind instruments in Chinese tradition, the Chinese bamboo flute, is generally divided into the southern qu flute, the northern bang flute and the alto flute in between.

The vocal range can generally reach two octaves more than two.

Sound is produced by the vibration of an object, and the pitch of the sound is related to the vibrational frequency of the object, the higher the frequency, the higher the pitch.

The flute is made by the vibration of the air column in the flute tube, when you press different holes by hand, the rise of the long slag next to the air column in the flute tube is different, when we play the flute, the air in the flute vibrates periodically, because different holes will make the air vibrate differently (as well as the vibration of the flute membrane), so you can blow a variety of songs with different tones such as old.

Stick your lips to the hole of the flute, just like kissing, with the lower lip facing the lower edge of the hole, then lift the upper lip, keep the lower lip on the bottom edge of the hole, blow downward, don't forget to stick the flute film, without the film it will not make a sound.

The mouth is in the shape of "Yu", bai first inhales full of air, and then leans his lips on the blowing hole, and the abdomen is slightly forced, and the breath is blown.

Specialized, remember to paste the flute film, you can buy it online, you can also buy it nearby, generally there are, it is recommended to buy online, and buy it with the special glue for the flute film, if you have Ejiao at home, you can also use it as glue. Novices generally have to blow for 20 minutes to barely blow loudly, mainly to find a feeling.

The flute has its specific pronunciation method, which is particularly crisp and ethereal, but the lung capacity is large and particularly laborious. If you listen to Nicholas Tse's "Yellow Race", the flute is attractive.

Be sure to listen to more, listen to enough 300 songs, and hum if you can't blow.

The sound of blowing can only be heard when it is blown.

Ask God for advice: Why is my flute hoarse? Sometimes it is very quiet or even silent.

Hello, it should be the stool for these reasons, the flute suddenly can't blow, in addition to changing the flute membrane, you also need to moisten the flute. The flute is made of bamboo, and the air is usually dry, and it is not well preserved, and its water evaporates too quickly. It will also become a bad timbre, or even blow at all.

In this case, you can practice more hands, blow the flute more, and the timbre will gradually become normal after slowly moisturizing. Suddenly not playing the flute is also closely related to the maintenance of the flute. Don't underestimate the maintenance of the flute, the flute is well maintained, the flute is like a divine help, the sound will be particularly good, and it will not make a fuss and the spleen will not be dull and unable to blow back.

1. Why can the flute make a beautiful sound? A flute made of bamboo pipes, there is nothing in it, only on the bamboo pipes.

How can you blow out a few holes and install a wooden plug (also known as "flute brain") at the upper end of the "blowing hole" pipe? It turns out that sound is produced by the vibration of objects. Reeds, wires, or strings vibrate to produce sound.

Similarly, liquids and gases can make sound when they vibrate violently. Although the inside of the flute is empty, there is an invisible column of air inside. When vibrated by an external force, this column of air emits sound at a certain frequency.

If the air column is too long, the lower the frequency, the lower the tone; The shorter the air column, the greater the frequency and the higher the pitch. When you put your lips on the mouthpiece, you blow out a flat, narrow stream of air to vibrate the air column inside the flute, and the flute makes a sound. Depending on the needs of the piece, you can release or press different sound holes to make the air column long and short, and different sounds will be blown.

Hehe This is a matter of physics, because the mouth blows the air, the air flows, and the air vibrates and makes a sound after entering the cavity of the flute