Does the driver sprite work silently on the computer?

It only doesn't work for the network card, and it can be solved in general.

The installer must use it.

Your sound card driver is gone,Use the driver wizard,Let's see,Is the speaker wired incorrectly。

Don't apologize, either you don't have a sound card driver, or your computer sound card is broken, you can have a device manager in my computer properties, see which sound card driver is installed? If everything is installed, it is an exclamation mark if there is no form, and if there is no form, it is a question mark. Look.

2.After the installation is successful, click the one-click scan driver and wait for the physical examination to end. This will detect the faulty driver on your computer.

5.Once the installation is complete, the computer will have a sound.

This shows that your sound card is not equipped with a driver, so you press the [Solve Now] button.

If it doesn't appear, it means that your sound card driver is fine.

If you have a speaker, it's not a problem with the sound card driver.

You see if the audio cables are plugged in, and if there is any power supply.

There is no mute by you.

First, first confirm that the hardware is fine. If the speaker is fine, the sound card is fine, and if you've tested it on other machines and it's really good, then you can read on.

2. Make sure all the cables are exactly right. Then power on the speaker and turn on the volume switch.

3. Install the driver of the sound card correctly, if it is an onboard sound card, it is best to install the driver provided on the driver disk of the motherboard.

In fact, the computer does not make a sound, and many times it is because the sound card is not driven correctly. In general, after the sound card driver is installed, there will be a small speaker icon in the taskbar in the lower right corner. ）

Fourth, if you are sure that the driver is installed correctly, then take a look at the volume settings in the computer.

The specific method is to double-click the speaker icon in the taskbar, and check whether the volume is turned off to the minimum in the "Volume Control" and "Waveform" dialog box in the pop-up "Volume Control" and "Waveform".

If these two options are not available in the dialog box, click on the "Options" menu - select "Properties" - select "Volume Control" and "Waveform" in the "Show Volume Controls" and then set them correctly.

Note: Step 4 can only be set up after the driver for the sound card has been installed correctly.

Not at all.,You also need a monitor to boot and a floppy disk to boot.。。

First, see if the data cable is connected, then see if the driver is installed, and then see if it has been muted, and you have to enter the control panel to set up, if not, you can ask someone to repair, ask others, others only listen. The real problem will not be understood.

Probably not, because yours is muted.

How about this! Try a universal sound card, it's installed by software.

There is no sound on the computer, first select another version number driver in the driver life to install, and then find the audio manager in the control panel, disable the front panel jack, specific tutorial.

The driver is damaged, just reinstall it.