The faucet is broken, what should I do if the faucet is broken and the water can t be stopped

It should be that the film inside the faucet is broken, you can ask someone to help you take a look at it, change it, if it is still leaking, you can replace it!

There is a rubber seal in the place where the head is turned, which may be permanent, and the rubber is worn out a little. You go to the shop that sells faucets and buy one, it's everywhere! Then change it to OK.

Generally speaking, the problem of water leakage can be solved as long as the shaft gasket or triangular gasket and other gasket parts inside the faucet are replaced. However, before the renovation, you have to turn off the main faucet switch in your home.

If the valve is not good, just change it, or the joint is leaking, if the joint, just re-wrap the raw material belt.

If you have a good hand on it, unscrew it yourself and check the rubber pad.

If you have weak hands-on ability, buy a new one, the cheap thing is a few dollars, and the good ones are tens or hundreds, depending on your financial ability.

Jue's family is good, I use this brand at home, and it is good and cheap.

Hehe. If it leaks if you don't turn it, then you need to repair it.

The faucet is turned off and has been dripping water can be solved like this:

1. Turn off the water source, then use a tool to disassemble the label above the faucet and unscrew the screws inside.

2. Remove the handle, and then turn the valve core in the direction of the faucet until the valve core is removed and set aside.

3. Remove the screws that fix the sealing ring, and then buy a new sealing ring and replace it.

4. Restore the faucet parts, test it, if the faucet is still leaking after closing, you need to replace the faucet with a new one, if the faucet is closed and does not leak, it means that the installation is qualified.

Tips for buying *** faucets

1. Look at the faucet spool.

The valve core is like the heart of the human heart for the faucet, which is the most critical part, so the valve core is also an important factor in determining the service life of the faucet. When purchasing, users should choose the best spool, so that the life of the faucet will be longer.

2. Look at the faucet process.

The production process of the faucet is also very critical, the faucet with a good production process, the galvanized layer on the surface is smooth and shiny, and the paint film has no color difference, and there will be no defects such as black spots and leakage plating. When purchasing, users should carefully check the surface of the faucet to ensure that it is smooth and free of defects.

If the faucet is broken, you need to close the water valve first to prevent the faucet from seeping. Then find the cause of the damage to the faucet, the faucet is not tightened, the valve core is leaking, the bolt is leaking, etc., you can reinstall it by winding the raw material belt at the interface. When the mouth of the shed is broken, a new faucet needs to be replaced.

1. Close the water valve

After the faucet is broken, the first thing to do is to close the water valve to prevent the faucet from seeping out.

2. Find the reason

There are many cases of faucet damage, such as broken joints, untightened tightening, water seepage at bolts, water seepage at faucet valve core, etc.

3. Treatment method

If the faucet is not tightened, water seeps at the valve core, water seeps at the bolt, etc., the faucet can be unscrewed, and the raw material belt can be wound around the interface several times before reinstalling. When the interface is broken and cracked, it needs to be replaced with a new faucet.

1. The core pull is damaged. If the faucet is broken, you need to find out the cause, prescribe the right medicine, if the core is damaged, use pliers to clamp the gland bolt and turn it counterclockwise to remove it, take out the damaged axle gasket, replace it with a new axle gasket, and tighten it clockwise with pliers.

2. The water-stopping tape is damaged. Use a wrench to remove the faucet, wrap it around the threaded hole with raw tape about 5 times, so that the raw tape and the threaded hole are tightly fitted, and then use a wrench to re-tighten the faucet clockwise, if there is no water leakage, it means that the faucet repair is completed.

3. The pipe is worn. Use pliers to loosen the faucet cover nut, and then tighten it in a clockwise direction, no water leakage indicates that the nut is loose, and the rusty nut can be soaked and cleaned with rust remover, and then He Ran can be re-tightened.

4. Replace the faucet. It is also the most convenient way to buy a new faucet to replace the core pull, water-stop tape and pipe parts inside the faucet after long-term use.

In fact, there are many reasons why the faucet is broken, so we must first find out the reason for the faucet is broken, the above is about the common reasons why the faucet is broken, if you can't solve it, you can only find a professional master to repair it.

1. First of all, turn off the water valve, if there is no sub-valve in the water pipe, then turn off the main valve.

2. Use a wrench to jam the faucet to be replaced, lock the wrench, and remove the bad faucet.

3. Unfortunately, the place where the faucet is exposed outside is easily twisted due to oxidation, and it is buried in the part of the collapsed body of the wall, leaving a section at the joint.

4. Use a chisel and hammer to chisel off the remnants of the wall.

5. After cleaning the residue chiseled by the chisel, the threads used for connection appeared at the hole. At the interface of the new faucet, wrap a few loops of raw tape.

6. Then install the new faucet on the cleaned interface, tighten it with a wrench, if necessary, you need to remove the faucet to wrap the raw tape, so that the water outlet of the screwed faucet is just facing down.