The problem of waterproofing the inner and outer wires of the water pipe 5

No, the connection method is not the same for the two connectors.

1. If the inner wire of the water pipe in the wall is damaged, the water leakage will occur, and the main sluice of the tap water should be closed first.

2. After finding the leakage point, use a tool to knock open the wall, and if the damage is not serious, use hot melt adhesive or glue adhesive to block the leakage.

3. If the water leakage is very serious, it is necessary to replace the inner wire accessories, and it is best to replace it with a *** one, so as not to cause secondary water leakage.

3. Finally, restore the knocked wall to its original state.

1. How to determine the location of the leakage of the water pipe in the wall?

The location of the leakage of the concealed water pipe can be judged by a professional water leakage detector, because the instrument is mainly through the noise of the water leakage to determine the location of the leakage, so it is more accurate, or it can also be checked through the water pipe pressure test, one by one to check the location of the leakage of the concealed water pipe, if the pressure value drops seriously, it means that there is a water leakage in the section, otherwise, that is, there is no water leakage.

2. How to deal with the leakage of the concealed water pipe?

1. Finding the location of the leakage is the key, because the concealed water pipe is installed inside the wall, and the surface may be paved with tiles, and the waterproof performance is good, so the leakage will spread to the periphery, and sometimes the leakage part is opened, and it is found that there is no leakage, which is very troublesome, so before the maintenance and treatment, it is best to find the location of the leakage with the help of professional instruments, and then deal with it according to the actual situation.

2. After confirming the leakage point, you need to chisel the wall or ground first, pay attention to the finished furniture in the construction process, be sure to protect the finished furniture, including tables, chairs, cabinets, etc., and then confirm the leakage position of the pipeline again, and clean it clean, so as not to affect the post-processing, and finally repair it according to the actual leakage situation.

Third, the concealed water pipe must pay attention to these three points.

1. Use the best PP-R pipe.

2. Before concealment, the pressure test must be done, and the test pressure should not be less than 6 kg, and then concealed if it is qualified.

3. Do not change the water pipe in the future, if these three conditions can be met, then it is better to bury it in the wall.

4. How to choose a water pipe?

1. To choose a local reputation and dealers, you can buy your own water pipes, those that are called so-called imports, and can only find information on the Internet, want to buy from the hail, scum can not buy water pipes are not recommended to use, in case there is a problem, who will guarantee the after-sales service, is a big question mark. In recent years, there have been many so-called original imported brands, and basically there has been no news after a few months of activity.

2. Secondly, when choosing water pipes, try to use hot water pipes, the ** of cold and hot water pipes will be slightly worse, but this ** difference is very small, after all, the waterway is a hidden project, and it is worth spending more money to buy insurance for yourself.

3. When choosing a water pipe, you can't just look at the water pipe, the waterway renovation water pipe does not cost much, and the most spent is the pipe fittings, such as a brand of water pipe 10 yuan a meter, a bend such as 4 yuan, and another brand of water pipe a meter sells for 8 yuan, and an elbow costs 6 yuan, a normal set of two house water pipes is changed to thirty or forty meters, and pipe fittings need to use hundreds.

1. The safest solution is to replace the fittings and pipes at the leakage location. Close the main valve, discharge the water, use PPR scissors to cut off the leaking pipe, use the PPR hot soup machine, and add a section directly. The process is not complicated, and it can be solved in 30 minutes by skilled workers.

2. Wipe the leaky part and buy it with plugging king (waterproof cement). Add a little less water, it is very thick, and the large surface is battered in the leaky position, that is, it is blind Huike. Cast iron sewer pipes are also often remedied in this way.

3. Use Jushenshi urethane waterproof powder (generally used in the bathroom waterproof) to transfer water and brush it on the leakage.

4. Use weather-resistant glue to hit the leakage.

Kiss! Hello, happy to answer your <>

The pro-method is: in the case of relatively small water pressure, you can directly fill it with the leakage material of the burning plugging wheel, and after filling, wrap it with a few circles of waterproof cloth to solve the problem of water seepage. If the water pressure is relatively large, it is recommended to find a professional to help repair, and generally need to replace a new one to completely solve the problem of water seepage.

The leakage of the water pipe is generally because the water pipe has been used for a long time, so the thread is a little worn, if the thread is worn, then the connection of the two water pipes is not particularly tight, so that there will naturally be a little leakage. At this time, we can consider using tape to wrap it in the thread, if not, you can wrap it more, and after wrapping it with tape, we can reconnect the two water pipes, which should effectively solve the problem of water leakage. Hope mine can help you <>

Do you have any other questions?