The laptop uses various wifi sharing software, and the phone shows that it can t join

Hello landlord.

This situation you said is very common and if you want to solve it, I recommend you use portable wifi.

Tencent's national wifi is very good,You don't need to install the driver yourself,There is no problem that you can't use it。 Tencent's national wifi is like a small router,After installing the driver, plug in this software, there will be a wifi link signal,And you don't need to pay for traffic when you connect to wifi。 If you pay attention to Tencent's national WiFi product, you will find that there will be many unexpected features and privileges.

It supports one-click code scanning verification, which saves you the steps of frequently entering and passwording.

Hope. Thanks for the good reviews.

Landlord,It's normal to think about such a situation,Because this free software is not all connected to the Internet,In fact, you can use portable wifi to do wireless network,Recently, Tencent just released the national wifi,It has a strong signal penetration,Plug it into the computer to automatically drive the installation and create wifi,No settings are required,There is also a mobile phone directly to the national *** scan the network,It is anti-rubbing network interception Trojan anti-fraud,There are also mobile games Tencent designated game package privileges, Computer online game acceleration, cross-network acceleration and other functions are very good, and the national wifi price is very affordable, and hopefully.

Hello landlord You may need a wifi hardware,Promote the landlord to see Tencent's new national wifi is good,It's about the same size as a USB flash drive,As long as there is a computer that can access the Internet,Plug and play directly into the computer,Plug and play,You can form a wireless hotspot with a very stable network speed,Mobile phones,Tablets and laptops can be connected to the Internet Then I heard that using this product to access the Internet,You can also enjoy a lot of benefits,And he also said that the driver-free Oh,Not bad Go and see it。

Turn off Windows Firewall.

2. Click the "Windows Firewall" tool in the control panel list, set Windows Firewall in the new interface, and turn off Windows Firewall, as shown in the figure. Once turned off, try to connect your computer to the shared wifi with your phone, if it doesn't work, then do the following method.

end: enable the dial-up network sharing permission.

1. If your computer is using a dial-up network, and mobile devices such as mobile phones cannot access the Internet through the wifi hotspot shared by the dial-up network, you need to enable the "Allow Sharing" function in the dial-up network.

2Click on the network icon in the bottom right corner of the desktop, right-click on the dial-up network you are using under "Dial-up & VPN", and click to select the "Properties" option.

4You can also re-create a dial-up connection by ticking the "Allow others to use this connection" checkbox button during the creation process. Once you've set up the "Allow sharing" feature, reconnect your phone to see if you can surf the Internet, and if so, do the following.

end: Manually set parameters such as IP address.

1. The mobile phone has been connected to the wireless network, but it has been in the state of obtaining the IP, or the Internet cannot be accessed after connecting to the wifi, you can manually set the IP address of the mobile phone, which is a crucial step.

3 Tick "Advanced Options" and click on the "DHCP" button under "IP Settings". In the pop-up dialog box, select "Static", set a usable IP address in the IP address box, and click the "Connect" button.

4. If the static IP address is set, the mobile phone still cannot access the Internet or the network speed is very slow. You can set other parameters. The gateway and DNS1 should correspond to the gateway and DNS of the computer, and other parameters should be kept by default, and then click the "Connect" button after setting.

The gateway and DNS information of the computer can be queried through the "Run" window as follows:

1.[Win] + [R] shortcut key to open the "Run" form;

2.Enter "cmd" in the text and press enter;

3.Type "ipconfig all" in the generator and press enter;

4.Find the network your computer is connected to and check its gateway and DNS.

If your computer has two DNS, it's best to set two DNS addresses on your phone. If there is one, the phone must be set up with a DNS. The static IP address of the mobile phone should be in the same network segment as the IP address of the computer!

5 The settings of this method are similar on iOS devices such as iPhone. If that doesn't work, perform the following steps.

endMobile network diagnostics.

Some software includes network diagnostics features, such as 360 Mobile Assistant for Android. This is the same as the network diagnosis of 360 Security Guard on PC, which can effectively detect and fix the situation that the phone cannot connect to the Internet. If your phone is connected to WiFi but you can't access the Internet, you can use this feature.

Click the "Diagnose Network" button to start diagnosing your cellular network. If the network status is abnormal, you can repair the current mobile network.

Hello, method.

First we need to prepare a mobile phone and make sure that it works fine, then we find the icon for "Settings" on the desktop of our mobile and we click on "Settings"."。

When we click to enter the "Settings" page, then we find the "Wi-Fi" settings icon, we click on the "Wi-Fi" settings of our mobile phone to turn it off first, and then we wait a few minutes to turn it on again to see if we can still connect to the Internet.

Or when our mobile phone is connected to wifi and shows that we can't join the network, we can also click on the problematic wifi network in the icon settings of "wlan", and then we click cancel save on the right side, and click not save on the pop-up page.

When we select the wifi network in question and click on the pop-up page without saving, then we click on the wifi network in question again, we re-enter the password again and click on the connection.

Summary: Here's my personal summary:

1.Click Settings, select Wi-Fi off, wait for a few minutes, and then turn it on.

2.Or click on the wifi in the WLAN to re-enter the password connection.