Is there a limit to the wireless that comes with telecom 50 megabit fiber?

No, first of all, if there is a wireless router, then turn on the power first, and then plug in the network cable, plug in the WAN port (generally the blue port), and then plug in the network cable connected to the computer at any LAN port, after doing these jobs, then you will see that there is an address and account password behind the router, after connecting, enter the address you see in the router in the browser, generally of course, if your home is using ** online network, then you have to prepare an additional modem, commonly known as "cat").

2Then enter, enter the corresponding account and password, generally the new ones are admin

3. After entering the operation interface, you will see a setup wizard on the left, Attack on the entry (usually pops up automatically).

4. Enter the setup wizard interface.

5Click Next, enter the Internet mode settings, we can see that there are three Internet access options, if your home is dial-up, then use PPPOE. Dynamic IP can be used by plugging the computer directly into the network, and there is a DHCP server on the upper layer. The static IP is generally a private line or something, or it may be a cell bandwidth, etc., and the upper layer does not have a DHCP server, or wants to fix the IP.

I chose PPPoE because I dialed.

6. If you choose PPPoe dial-up Internet access, you need to fill in the Internet account number and password, which should be understood by everyone, and there will be an account number to open broadband, and it is OK to fill it in.

7 Then the next step is to enter the wireless settings, we can see the channel, mode, security options, SSID, etc., generally SSID is a name, you can fill in as you like, and then the mode mostly uses 11BGNFor wireless security options, we need to choose WPA-PSK WPA2-PSK, which is so safe that it will not be hacked and rubbed by the network.

8. The next step is to set it up successfully.

9 Click Done, the router will automatically restart, at this time you should be patient. The interface that appears after success.

If it is a wireless optical modem, this generally does not support automatic dialing, and it needs to be connected to a wireless router before it can be used.

If it supports autodialing and can be used directly by connection, there is no restriction and it can be used normally.

50 megabytes of fiber is enough in the case of Internet access and playing small games.

1. If you just go online, chat, and play games, the network of about 10m is enough.

5. It is mainly calculated according to the number of users of your broadband.

Theoretically, the ** speed of 50 megabits per second of telecom optical fiber is megabytes, that is, it can reach 6400kb per second, but we usually find that the network speed cannot reach such a high speed at all, due to the line and some external forces. Our home is 100m telecom fiber, up to 1000kb a second, so the actual speed of 50 megabyte telecom fiber is about 500kb to 1000kb a second.

The specific network speed still depends on your own test to know, because each one is different. At present, the speed test can be supported: speed test, speed test, file speed test, other speed test tools and local speed test tools.

Hello and thanks for supporting Telecom.

A 300 megabyte router with 50 megabyte fiber is possible, so please feel free to use it.

OK. The speed at home is faster than outside, which is normal.

Fiber speed calculation method.

And the operators all use the latter, probably because the value is good. This is the reason why the speed of 1M broadband is only about 125KB per second. To divide by 8.

1m=1024kb You should know the common sense, 1024 divided by 8, just about 125.

I've looked at other people's, and it's basically not very complete.

For the average speed of 50m, you have to figure out two points first.

First, 50 megabytes refers to 50mbps, that is, the maximum speed per second is 50 8=, pay attention to the difference between mb and mb, telecom told you that 100 megabytes is essentially mb, and you see that the file size of the computer is mb, 1mb = 1mb*8.

Second, the network speed of 50m refers to the overall speed of uplink + downlink, so it is actually difficult for you to judge the average speed. If the theoretical value is naturally yes, but this one contains up + down.

Hello, now telecom users can upgrade to 100m for free. In the future, Shanghai Telecom will increase the speed to 100 Gigabit for more telecom broadband users free of charge, better supporting the digital transformation of cities and meeting the growing needs of the people for a better life. Shanghai Telecom provides door-to-door network diagnosis services for residents, provides end-to-end home network optimization solutions for citizens, and simplifies the acceptance process. Forming a team of "information counselors" to provide smartphone app counseling for daily life; In terms of services for the elderly, Shanghai Telecom introduced new information technology and anti-communication fraud knowledge to elderly users. Set up caring customer service**, automatically identify elderly users over 65 years old, and enter manual customer service with one click.

When connecting a router or a wireless cat to the Internet, the speed of wireless transmission is related to router settings, wireless signal quality, etc., the current commonly used router is 300m, you can set --- wireless settings in the setting, forcibly set to use b g n, set to n, in addition, the wireless network card you use also needs to support 300m.