How to set up wireless for telecom fiber broadband?

1. After powering on the wireless router, log in to the wireless line router on the mobile phone or computer, change the LAN port address of the wireless router to avoid conflicts with the LAN port address of the fiber optic modem, save it, and restart the wireless router;

2. Connect the network cable from any LAN port of the fiber modem to the WAN port of the wireless router, and then connect the network cable from the LAN port of the wireless router to the computer, and the IP address and DNS settings of the local connection of the computer are automatically obtained;

3. Open the browser, enter, press Enter, enter the default login username and password of the wireless router to enter the wireless router settings interface;

4. The next step of the setup wizard, the general household is to choose the ADSL virtual dial-up (PPPOE) mode, the next step, enter the Internet access and password provided by the network ** provider, the next step, set the wireless network name in the SSID box, select the WPA-PSK WPA2-PSK encryption mode, enter at least 8 digits of the wireless password, the next step, save, restart the wireless router to complete the installation.

The steps are as follows:

1. After installing the optical fiber, insert one end of the network cable port into one of the network ports of the optical modem.

2. Connect the other port of the network cable to the computer and check whether the link is successful.

<>4. Settings"WLAN security configuration"。

5. After entering the page, select Mixed WPA2 WPA-PSK as the encryption method, and set the network password in the WPA pre-shared password.

6. After success, you can unplug the network cable and connect it to the wireless network.

After the telecom optical modem is installed, connect the network cable port to one of the network ports of the optical modem (for example, network port 1).

Connect the other end of the network cable to the network port of the computer, check the network connection status, and ensure that the network is successfully connected.

Use the default address to enter the Fibre modem settings page, which is generally the default address, and the user name and password can be found behind the device.

<> set up wireless basic information:

After logging in, click on the "Network" column, and by default on the left side, check "Enable Wireless", "Wireless QoS", and "Wireless Multicast" before the basic WLAN configuration.

Set a wireless network password:

In the navigation pane on the left, select WLAN Security Configuration and configure the following parameters:

Encrypt method: Mixed WPA2 WPA-PSK Click Save application.

After the setting is successful, you can connect with the network cable and connect to the Internet through the wireless network.

You're going to talk about the general process of setting it up. to help you.

Otherwise, there is no way to start: the information you need to provide is:

1. Is the telecom fiber finally the RJ45 line to your router, or the fiber to your router?

2. Is your fiber IP fixed, dial-up, and dynamically obtained?

3. What model is your router and how do you set it up to connect your win7

The basic setting on the computer is to set the IP to be able to communicate with the router. The basic mode is the same network segment, which can be pinged. The gateway points to the internal network of the router and sets it to the DNS of the ISP.

If the server has DHCP and DNS servers, the settings are different. But the core content is the same.

Telecom fiber-to-the-home needs to be connected to the optical modem to be used online, and wireless routers need to be connected to the optical modem. According to the different optical modems used, there are two situations:

1. The home optical fiber connection is a simple optical modem device, the cat is directly connected to the computer with a network cable, and the computer needs to be dialed up to connect: set the router WAN port parameters to PPPoe dial-up mode, and enter the broadband account and password, and other settings can be set according to the router manual or according to the router setup wizard. After the settings are complete, use a network cable to connect the modem to the WAN port of the router.

2. The optical fiber connection device is a GPON device that integrates the cat and the router, and the computer directly connects the cat without dial-up connection of the computer, and the computer can be connected to the Internet by automatically obtaining the IP

Set the WAN port parameter of the router to dynamic IP, and pay attention to modify the IP address of the LAN port, so as not to be in the same IP segment as the IP address of the modem to avoid IP conflicts. For example, if the IP address of the cat is changed to the first three digits of the LAN port of the router, at least one of them cannot be the same as the first three digits).

Other settings can be set according to the router manual or according to the router setup wizard. After the settings are complete, use a network cable to connect the modem to the WAN port of the router.

Set the DHCP function to disable the LAN port of B, turn on the LAN port setting of network parameters, and change the IP address of the LAN port so that the router and the modem are in the same network segment. For example, the LAN port IP of the cat is, change the router to , as long as it does not conflict with other IP addresses that have been used. The WAN port parameters do not need to be set, and the wireless settings of the router are set according to the manual.

After the setting is completed, the LAN port of the cat is connected to the LAN port of the router, and the router is equivalent to the expansion port of the optical modem, which plays the role of a switch, and the computer can be connected to the LAN port of the router and can be used. After the settings are complete, connect the modem to the LAN port of the router with a network cable.

Is it a wireless router? Can you enter the IP of the router on the computer to connect to it? Is the broadband connection plugged in, you don't need any configuration on the computer, log in to your routing page on the computer and fill in your broadband account password, ok nothing is needed. Automatic Internet connection is up.