Remote and router settings, how to manage and set up routers remotely

Let's put it simply. Use your router to map port 3389 of the IP address where it is located, that is, let the port of your machine leak in the external network. If your computer has port 3389, which is a remote desktop connection, then other computers can connect remotely when they know your IP and username and password.

If you use some remote control tools (such as Gray Pigeon) to connect to your computer, then you only need to have the Gray Pigeon server Trojan configured by the person you want to connect to, and you don't need to take the router mapping.

Addendum: That's what it means. If you use a router to map the port of the computer you are on, the port of this computer is exposed to the Internet.

Then, if you enter the IP of your router to connect to 3389, it is actually connected to port 3389 of this machine, which is the mapping. So as long as you want to map port 3389 of the machine you are looking for to the external network port, and then enter the WAN IP set on your router, you can connect to the machine you want to connect.

Step Method.

1..First of all, to apply for a dynamic domain name, of course, there are paid and free of charge, and most families use it for free, and you can find a lot of it at once

2.To log in to your router, the connection must be successful.

3.Found: Advanced Configuration - Dynamic Domains,And click on the external network line you want to set, the router is dual WAN, here take wan1 as an example, but the average person's router is single-WAN, only one can be selected.

Note: The functional interface of each router may be different, but the general function module is the same.

4.After entering, first enable the dynamic domain name, and then select the dynamic domain name service provider.

5.Set up your dynamic domain name and the account password for the domain name, and click Apply.

Step to read. 6.After applying, it will prompt that it is being saved, and the saving is successful. If the input is correct, refresh the page and it should show that the connection is successful.

7.At this point, the dynamic domain name has been completed, but it is not possible to log in to the router remotely at this time! Because, connecting to the domain name only means that it can be converted into a real IP address, and the router (also known as the small firewall) must let go of the remote login function and specify the port before it can log in in the form of domain name + port.

8.Go back to the router management interface. Found: System Tools - Manage Options.

9.After entering, click on the port first, and then set the number of the port (1-65535), because the port used by the system is generally less than 1000, it is recommended to set the port above 1000 to avoid conflict with the system port.

10.Finally, let's take a look at the effect after login, which is the same as intranet login, except that the address of the address is different.

Introduction: How to manage the router through the Internet? Most routers provide a "remote web management" function, which can be used to remotely manage routers through the Internet. Let's take a look at how to use this feature.

Method steps

First of all, log in to the router management interface, usually we can find the "router management address" and "user name" and "login password" on the nameplate on the back of the router. Here we take the "Tengda" router as an example.

Open the browser and enter the default password "admin" to log in to the router management interface.

Then click the "Advanced Settings" button to set up the screen in detail.

Switch to the "System Tools" tab, click on the "Remote Web Management" item, and then check the "Enable" item.

Then enter the "Port" number (which can be set to any number between 1 65535) and "IP address" (the IP address of the computer in the WAN that can perform remote web management) and click the "OK" button.

Then switch to the "Advanced Settings" tab, click on the "Running Status" item, check the "WAN IP" address corresponding to the router, and remember it.

Finally, you can realize the remote management operation of the router. You only need to enter http: wan ip:port in the browser interface of the remote computer (the IP address must be the same as the remote IP address in the router) to access the router remotely.

TP router remote settingMake sure your computer is connected to your router.

Log in to your router.

Then we need to get the public IP address first.

Next, switch to security settings.

Click Remote Web Management.

You can see that you can set the remote management IP and port here.

Fill in the ones we got earlier'IP address.

Port input by the way.

Click Make sure the save prompt takes effect when the router is restarted.

After the reboot, we can use the remote IP address we just got to access it.

Have you learned?

<>1. First log in to the router management interface, and you can find the "router management address", "user name" and "login password" on the nameplate on the back of the router. Here we take the "Tengda" router as an example.

2. Open the browser and enter the default password "admin" to log in to the router management interface.

3. Then click the "Advanced Settings" button to enter the detailed settings interface.

4. Switch to the "Security Settings" tab, click the "Remote Web Management" option, and then check the "Enable" item.

5. Then enter the "Port Number" and "IP Address", and click "OK". (Note: You can enter any number between 1 65535 for the port number.) IP address input is easy to manage, of course, you can also fix the IP address, which is more secure).

6. Switch to the "System Tools" tab, select "DDNS", and "Enable" the DDNS service. Here you need to register a dynamic domain name, Tengda router just comes with registration**, directly click "to register".

7. Log in after the registration is completed.

8. Then click on the "Dynamic Domain Name" tab, select the "Domain Name List" option, and click "Create Dynamic Domain Name" to guess the branch.

9. Enter the domain name prefix you want, check it to see if it is used, if it is not used, then it can be used.

10. Now go to the DDNS settings of the router, enable the DDNS service, select the service provider, enter the username and password you use to log in to the public cloud, and enter the dynamic domain name address that you have successfully registered.

11. Click the "OK" button after confirming that it is correct. Restart the router and the new settings will take effect again.

12. Try it now, enter the dynamic domain name address + port number directly in the browser, and see if you can enter the routing management page. (The port number is the one set in step 5).

13. After the configuration is completed, remote management can be carried out.