D LINK router who knows how to control remotely

Take out the manual and take a look.

When setting up the router, sometimes you will encounter the settings are set, but you still don't know how to set some functions, then you can enable the remote management function, so that people who know this setting clearly connect to your router to help you do the work of checking. (Take DI-504 as an example) Select Activate, select remote management port 8080, and click Execute. After the setting is completed, you also need to inform the person who needs to remotely manage the router of the IP address of the WAN so that they can log in to the configuration interface of the router for management, click on the system status, and you can view the corresponding IP address on the WAN side below.

The easiest way to remotely boot is to directly use the hisnake network card, the network cable is connected to the LAN hole of D-Link and then install the sunflower remote control software, there is no threshold for operation, completely abandon the technical difficulties such as port mapping to the router before, and the main control terminal can be installed in mobile devices such as mobile phones and tablets with Android and iOS systems, which is super convenient!

I bought the hisnake network card in **.

D-Link routing basically does not support remote wake-up! The MAC address table is automatically refreshed after 5 minutes when the device is powered off.

To wake up remotely, the first thing to boot up is your network card.

。。。Are you talking about turning on the computer remotely?

1.Plug the broadband modem or home network cable into the WLAN port of the router, and then connect to the computer through the network cable or wireless network.

3.After entering the page, you will be prompted to enter the management account, which also needs to be found in the manual, and the general account password is admin.

4.Click the Setup Wizard, follow the prompts on the page to set up broadband without oppoe dialing, and enter the broadband account password.

5.According to the prompts on the page, check the box to turn on the WiFi network, and set the password, when finished, click Next, and the device will automatically restart.

All set a fixed IP address, the network cable can be directly connected, if you want to access the Internet, you can go through the switch, router, hub, whatever you want. Allow remote control on computer B, and create an account and password that you use on computer A.

The router settings for remote control need to be changed to router support, and the settings are carried out through the router settings page, taking TL-R4149 as an example, the operation method is as follows:

1. Start the Internet Explorer, enter the intranet IP address of the router, and press Enter;

2. The login dialog box pops up, enter the router account password to log in;

3. Click System Tools on the left navigation bar --- remote web management;

3. Enter the remote management port number, set the remote IP address that allows management, which means that all hosts on the external network can log in to the router to perform remote web management, and click Save;

4. After the setting is completed, open the browser on other hosts on the external network, and enter: http: The external network IP of the router is 1026 to log in and access.

Here's how:

1. Launch Internet Explorer.

Enter the router's intranet.

IP address, carriage return;

2. The login dialog box pops up, enter the router account password to log in;

3. Click System Tools on the left navigation bar --- remote web management;

3. Enter the remote management port number and set the remote IP address that allows management, which means that the external network can be allowed.

All hosts can log in to the router to perform remote web management, click Save; Then you can open a browser on other hosts on the external network, enter the external network IP of the router: 1026, and you can log in to access.

To facilitate management, set the intranet IP address of the monitoring host to a fixed one, and the IP address number should be as low as possible to avoid conflicts with other computers. Enable router port mapping (TP-Link router as an example).

1. Enter the router IP in the IE address bar;

2. Enter the username and password (default username admin, password admin);

3. Click on the left test of the web page from top to bottom in the fifth "** rule";

4. Click "Virtual Server".

5. The server port in the window on the right side of the device (enter 80 or 80 or respectively), IP address (i.e., monitor the intranet IP address of the host), protocol (select all), enable (check all checks), and save it after entering it correctly. Note:

Because the software involves a large number of ports, some routers only support a few ports. As we have introduced, the TP-Link router can only open 8 ports. If the customer needs to open multiple ports.

You can replace a router that supports multiple ports.

Dear users, hello.

Hopefully, the following will be helpful to you:

No. If the router cannot be controlled remotely, it must be connected to the router before it can enter the router control.

China Telecom provides the best quality network communication services, old friends for new phones, Internet age cash, 100 megabit broadband free experience, ultra-clear TV ITV to take home, 517 Telecom Day activities can be directly queried through the telecom online business hall or physical business hall.

Far away? Is it telnet? Or SSH? There is also the router's own management platform, set up an IP management, and you can do it.

I don't understand what effect you want! If it's control, you know the address on it! That's your gateway address.

The theory is that it can be like this.,Now the macro early cherry tree route is set up on the road shelter cluster mapped by the port,80Port,Open closed and then directly access the IP,It should be possible to manage it remotely.,But it's just a theory.,You can map a computer's 3389 now.,And then remotely control this computer.,You can manage it.。

Do you quietly raise the road to start the scrambler by the device to support the remote?

If supported. Go inside the router and put the remote far away in the middle of the trouble. Wouldn't it be better to enter the address somewhere else?

Isn't it OK to have a public IP address for a direct telnet router??

TPLink Router Remote Control Setup Method:

1. Cloud router.

2. Other routers.

Except for cloud routers, all other routers can access routers over the Internet by enabling remote web management on the router interface. Here's how to set it up:

1. Set up remote web management.

Log in to the router interface, in Security Functions > Remote Web Management, the web management port is modified to 9090, the remote web management status is selected as Enabled, and the remote web management IP address is set to allow all computers on the Internet to access the router interface), and click OK. As shown in the figure below:

Please note the following:

It is recommended to set the web management port to an infrequently used port, such as a port above 9000.

2] After changing the web management port, you need to use http: lan for LAN computer management

Port IP address: port (for example: 9090

The wireless router in the new interface, click Advanced Settings > Device Management > Web Management Settings to set it up. As shown in the figure below.

After turning on remote web management, the LAN computer still uses the router that accesses the new interface.

For enterprise-level routers, click System Tools > Device Management Management > Remote Management, add a new entry, and set the web service port in System Management Settings.

2. Check the IP address of the WAN port.

Click Running Status to view the WAN port status and record the WAN port IP address.

3. Access the router from the external network computer.

On the Internet, enter http: wan in the address bar of the browser

Port IP: port to access. As shown in the figure below.

If a dynamic domain name is logged in to the router, you can also use http: domain name:port to access it.

Enable remote management access on the router, please refer to the router's manual for specific operations.

DDNS is enabled on the router and the information is configured so that you can use peanut shells.

Home service, this service is subject to a fee.

Set the login password for your router.

From the remote test, enter the domain name registered in Peanut Shell, if prompted to enter the account password, enter, you can log in, and you're done.

Now it seems that many routers can, the 360 router I know can, use the app to control, you can remotely disable others from networking, anti-rubbing network, and you can also remotely add ** tasks. People who have used it say it's good.

Enter the IP address of the router in the address bar of the browser, and after the connection is established, log in to the username and password.

After logging in, set the IP address subnet mask and WAN port login account password in the network parameter LAN, and then connect.

Set the gateway of the device you want to remotely monitor as the internal IP address of the router, and set the IP address to be in the same network segment as the gateway.

Then do the port mapping in the Rules--Virtual Service.

Peanut shell applies for a domain name, resolves the domain name, and accesses it with the domain name prompted in the domain name information.