Can a wounded heart be glued with 502?

Of course not

It's like a bowl that has accidentally been dropped to the ground and shattered. Even if you glue it up, the crack will never go away.

All glues containing 2 (love) can be glued well.

Yes! As long as it's not a fake product, hehe.

No, 520 is used in this case.

Look at what kind of 502 it is, it is definitely not good to sell it on the street, and it should be okay to regard family and friendship as 502!

Haha, you can really do it, you can do it with 101.

If you don't care, you won't get hurt.

How could there be no ???Drink a big bucket and make sure that you don't invade all kinds of poisons in the future.

You're sad, but you're sober, you haven't forgotten the humor, and you'll heal in a little time

The rainbow in the distance will not give up her beauty because of the wind and rain for a while!

Pack your bags and start again!

It was a rare experience.

Look for the reason for the failure.

Always do that.

Time is the most powerful medicine for healing wounds.

Time passes, and you will slowly forget the pain.

- Heart - how to stick?

A wounded heart

Even if the wound is healed

The scars are still there. /、

Then keep it

Refrain from yourself at all times

Stop believing in love.

Don't keep leaving the same scars.

A wounded heart

It's hard to go back in time.

Or decadent. Either. — Stronger,

Maybe when you meet someone you love, you can heal.

Heart, not only needs time, but also depends on whether you are willing to face it, if you just blindly escape, then it is useless to give you a long time.

When the wound heals, the heart is naturally glued.

Learn to let go.

The scope of application of 502 glue energy: quickly glue metal, rubber, plastic, toys, wood, ceramics, jade, jewelry, handicrafts, stationery and sports supplies, electronic parts, etc., and stick it within about 30 seconds.

First, how to use.

1. Clean the surface first, remove the dust, oil, rust, etc. on the surface, and when the metal is connected, it is best to grind it roughly, and the surface should be activated first for plastics such as PE, PP or PTEE.

2. Open the front cover, and gently buckle the tip with your fingers so that there is no residual liquid, and then cut out the hole with scissors.

3. Drop a small drop of adhesive on the surface to be connected, immediately carry out the bonding, and keep it until hardening, the area of the substrate should not be too large, and the thickness of the substrate should not exceed.

4. Wipe the container after use, close the lid, and store in a cool, dry place or refrigeration.

2. Precautions.

1. The vapor of this adhesive will puncture the mucous membranes and eyes.

2. Avoid contact with ** and enter the eyes, if due to accidents, immediately wash with a large amount of water and send to the hospital, when cleaning the eyes, you can use dilute sodium bicarbonate solution.

3. When touching hands, you can wash with soap, water, washing liquid and pumice. Otherwise, it will condense on your hands after a while, and it will recede after a few days.

If you glue it, it's okay to vibrate at the break infrequently. 502 is very sticky, but the disadvantage is that it is hard after sticking, so the vibration is easy to fall off.

If the paste is good, it will generally not crack, and 502 is super glue and the stickiness is very good.

It can stick for a long time, and our plastic has been sticking for 3 years.

Properly handled, the time is quite long.

There are also certain skills in bonding with 502, the thinner the adhesive film, the greater the bonding strength, that is to say, in the case of coating the adhesive surface, the less glue is used, the greater the adhesion, it is not advisable to close the adhesive surface immediately after gluing, wait a few seconds, let the glue absorb some moisture in the air, which is more conducive to curing, and this time will be held by itself.

Correct usage of 502 glue: 1 First clean the surface of the object you want to stick to, so that it will heal firmly.

2. Apply the glue gently and evenly to the surface of the object, it is necessary to apply it on both sides, not too much.

3 When it is almost dry, quickly glue the two objects together, and then hold on to it with your hands for about 5 seconds.

It depends on whether you use it well or badly, a good sticky time is very long, and it is firm.

The 502 is very sturdy, and it is basically used for a long time when it is glued.

For a long time, I took off my shoes a little and made up with a 502.

I've been wearing it for almost 2 years, and it's fine. Awesome.

No, 502 is hard when it dries. If you break it, it will break.

In addition to plastic and rubber, it can be almost glued, such as glass, metal, ceramic, hardwood, etc.

Anything can be done, it's just a kind of polyester, and when it dries, it's hard like plastic, and you can imagine what you can stick to.

The strength of 502 glue is not very good, AB glue will be better.

Quickly put bubbles in hot water and wash it clean It is best to apply some moisturizer before using 502 glue in the future, so that even if your hands are 502, it will not stick, if you are at home, you can use the following methods: After a long time, it will naturally separate. (It doesn't need to be too long, don't be afraid) Move more and break it with some force, limited to a slight pain.

It would be better to break it for a while and rest for a while, and soak it in water.