The computer card machine U disk starts, how does the U disk boot disk mount get stuck

1. If the disc is installed, it may be that the disc is scratched, resulting in incomplete data reading; If it is an old machine, it may also be that the optical drive itself is aging and the reading data is inaccurate.

2. If it is a U disk installation, the installation file may be incomplete, which needs to be made to start the U disk before the system on the U disk to check the MD5 code in advance, to see whether the original system is complete and correct.

3. If it is a hard disk installation, you need to check the MD5 code of the system to be installed to see if it is consistent with the MD5 code of the original system, and confirm that it is consistent to ensure that it is correct.

In addition, if something goes wrong with the cloning system, it is generally not easy to reflect it during the cloning process; The installed version of the system, when installing, once there is a mistake, it will give a prompt immediately.

The driver of the system disk does not support the motherboard, so change the system disk.

Initialize gfx** change the song installation package and take a look.

U disk boot disk didn't get it right.。。。

Search for "Plug in the hard disk or card reader or memory card of the mobile barrier, the computer will freeze (and you can't see the drive letter), unplug it and it will be alive again....Solution" I've come across the same question as you before.

The reason for this phenomenon may be that your USB flash drive has a bad block or an expanded USB flash drive, your USB flash drive may be a copycat expansion upgrade, and even the flash memory chip used may be a black film, if you want to use it normally, you must use the USB flash drive mass production tool corresponding to your USB flash drive main control model to mass produce the USB flash drive, so that the mass production tool can pick out the bad block and restore the usable part of your USB flash drive.

For specific operations, please refer to the digital home U disk class post round regret, be sure to see the mass production process of the U disk first, and then use Chipgenius to measure your main control chip model, and then ** the mass production tool of the corresponding main control model, and finally use the mass production tool to re-mass produce the U disk, pick out the bad block and restore the real capacity. Remember.

The reason for this phenomenon may be that your USB flash drive has a bad block or an expanded USB flash drive, your USB flash drive may be a copycat expansion upgrade, and even the flash memory chip used may be a black chip, if you want to use it normally, you must use the USB flash drive mass production tool corresponding to your USB flash drive main control model to carry out mass production operations on the USB flash drive, so that the mass production tool can pick out the bad block and restore the usable part of your USB flash drive.

For specific operations, please refer to the U disk post of the digital home of Yuanregret, be sure to see the mass production process of the U disk first, and then use ChipGenius to measure your main control chip model, and then ** the mass production tool of the corresponding main control model, and finally use the mass production tool to re-mass produce the U disk pants cavity stove, pick out the bad blocks and restore the real capacity. Remember.

In the fierce. Library].

I've had the same rotation problem as you before.

1.First kill the virus, some viruses of the U disk can be automatically copied to the U disk, and when using the U disk, it will run automatically, and it will be very stuck.

2.Some software will automatically scan the USB flash drive when you insert it, such as antivirus software, storm video, etc., which will occupy the CPU and may be stuck.

3.If the system is a simplified version, it will not have a plug-and-play driver, and the USB flash drive will not be recognized when plugged in.

4.The system has a conflict with the plug-and-play service, and some optimization software has a setting of "U disk does not run automatically", and your U disk will automatically pop up after insertion, and you need to change the optimization. It could also be a system issue.

Can the USB flash drive be used normally? You can go to other computers to test whether it is normal, otherwise it may be a problem with your computer, you open the device manager in the morning, find the problematic USB flash drive device, right-click to uninstall it, and then reinsert the USB flash drive, the system will automatically recognize Lu Sui to do not install the driver is normal.

The USB drive has a virus formatted it.

Yes, you search for the Chinese cabbage system, from the Internet**a Chinese cabbage U disk production tool,Make the U disk into PE,And then from the Internet** a system image gho you need to put it in the gho folder of the U disk,You can from the system home**. Then start the computer settings from the USB flash drive,Enter from the second option of cabbage pe,Then the computer will automatically pop up the installation tool,Select the location where you want to install the system,And then OK,About ten minutes to install。 Then you can use the new system.

No, the system of installing a new SSD will improve a lot.