OnePlus X can only enter fastboot, how to save it

Due to the different chip platforms used in various mobile phones, the operation of entering fastboot is also somewhat different, generally as follows:

The first type: press and hold the volume down button and the power on button at the same time for 3 5 seconds and let go;

The second way: press and hold the volume down button, insert the data cable into the mode and let go;

The third type: press and hold the volume plus key and the power button at the same time for 3 5 seconds to let go;

Fourth: Press and hold the volume plus or minus button and the power button at the same time for 3 5 seconds;

Fifth: Press and hold the volume plus or minus at the same time, insert the data cable into the mode and let go;

How to flash fastboot? The so-called fastboot flashing machine is actually a line brush! The wire brush needs to connect the mobile phone to the computer through the data cable, so it is called the wire brush.

Generally, you need to flash recovery to enter recovery

Mobile phone There are two ways to flash into third-party REC mode:

Method 1: Turn on the phone and enter the system state, use the [Mobile Uncle Toolbox] software, and flash into the [third-party recovery mode], the specific steps are as follows:

On the phone that has successfully obtained root permissions, **Install the [Mobile Uncle Toolbox] software, use the [Mobile Uncle Toolbox] software, and flash into the recovery mode

1.Search for third-party files that match the signal of your personal mobile phone brand and model on the Internet (the official website of the recommended mobile phone brand, Android Netjifeng Forum, and the network disk), and copy and paste them in the mobile phone SD card card root (card root: that is, copy and paste directly in the SD card, and the file cannot be placed in the folder directory).

2.Successfully obtain the root permission of the Android system of the mobile phone.

4.Use the [Recovery] function of [Mobile Uncle Toolbox] [Import files on SD card] OK Reboot After restarting, it will automatically enter recovery mode and the flashing is completed. After entering the recovery mode, press the volume key to toggle the options; Press the power on button to confirm and perform the operation.

Method 2: When the phone is turned off.

1: Enter fastboot mode;

2: Connect the mobile phone to the computer with a data cable;

3: The computer automatically identifies the loading driver;

4: Find the recovery package, run it, and flash it into recovery.

Ways to enter recovery mode on your phone:

Method 1: If the phone is powered on, please turn it off first, and in the case of power off, press and hold the power (hang-up button) + small house (home) button at the same time until the recovery interface appears.

Method 2: If the above methods cannot be entered, then turn on the computer again, first press and hold the volume + button, and then press and hold the power power button until the recovery interface appears.

Hello !

According to your description, 1+ phones to flash.

It is recommended to follow these steps after backing up your phone's data:

2 Press and hold the [Power Button] and [Volume-] buttons in the OFF state for 10 seconds.

3 Enter fastboot mode.

4 Connect to your PC and use Flash Tool to flash your computer.

5 The flashing is complete and the system restarts.

This is called digging coal. No, just do the system.

Can it be turned on? Press and hold the power button and the volume button at the same time.