Other names for fitter workbenches for fitter workbenches

Kiss Hello The placement rules of the fitter's workbench tools are as follows: 1. Before the training begins, the training tools are placed on the right side of the workbench vise, and the workpiece to be processed is placed on the left side. 2. The tools should be placed on the work table in the same direction, and the tools should not be stacked together, and the tools should not be mixed together with the stove.

3. Tools and measuring tools should not be placed on the work surface. 4. The wrench of the vise should be under the source of the branch, not suspended above. 5. Do not put tools and rough workpieces on the flat plate.

6. The tool should be cleaned and put back after use, and the taps should be disassembled and cleaned after tapping is completed. 7. After the workpiece is processed, it should not be placed on the vise for a long time.

Summary. Kiss! Hello, glad to answer for you.

The pro-fitter's workbench tools are placed on the left side of the vise, such as calipers, micrometers, etc., and on the right are placed various knives, such as files, scrapers, etc., and the front of the vice is a variety of models, such as angle models, deformed models, etc. Hope mine can help you!

Kiss! Hello, glad to answer for you. The resistance of the pro-fitter's workbench tools is placed on the left side of the vise, such as calipers, micrometers, etc., and on the right is placed a variety of knives, such as files, scrapers, etc., and the front branch of the vice is searched for various models, such as angle models, leakage and deformity models.

Hope mine can help you!

Show the reasonable tools and fixtures to place the fitter table (explain the theoretical basis and rationality of the placement) (brushes, vernier calipers, scribing needles, steel rulers, large flat files, marking rules, gloves, round file sample punching, square files, small flat files, spring reed square rulers, hammers).

When working on the fitter's workbench manufacturer, in order to facilitate access, the measuring tool used in the right hand is placed on the right side of the bench clamp; The measuring tool for the left hand is placed on the left side of the vice; Each is placed neatly. The gage should be placed in the gage and should not be mixed with the workpiece or things. The measuring tools should be placed neatly in the box or box.

Fitter workbench manufacturers are one of the commonly used equipment for fitters. It is suitable for all kinds of inspection work to bury the tomb, precision measurement with the datum plane, used for machine tool mechanical measurement datum, check the dimensional accuracy or shape and position deviation of the parts, and make precision marking. It is also an indispensable basic tool in machine building.

The fitter workbench is used for the power test of the machine and the engine of the machine, and the equipment is debugged, and the liquid simple has good plane stability and toughness, and the surface has a T-shaped groove, which can be used to fix the experimental equipment.

The fitter's workbench is one of the commonly used equipment for fitters. It is suitable for all kinds of inspection work, and the datum plane for precision measurement is used for machine tool mechanical measurement datum, checking the dimensional accuracy or shape and position deviation of parts, and making precision marking. It is also an indispensable basic tool in machine building.

1) The fitter's workbench is generally required to be close to the wall, and people are standing on one side to work, and no one is allowed on the opposite side.

2) When sawing the workpiece with a hand saw, the saw blade should be properly tightened to avoid the saw blade breaking and hurting people.

3) The fitter's workbench should be set up with a wire protective net, and the safety of the opposite staff should be paid attention to when chiseling, and it is strictly forbidden to use high-speed steel as a chisel.

4) The sundries on the fitter's workbench should be cleaned up in time, and the tools and workpieces should be placed in the designated place.

5) When there are people working on the opposite side, a safety net with appropriate density must be set up in the middle.

6) The lighting voltage used on the fitter's workbench should be 36V and below the safety voltage.

7) The fitter's workbench must be checked to see if the tools used are in good condition.

One of the most basic elements of the anti-static workbench is to be able to prevent static electricity from interfering with normal work. Then the first thing we have to check is whether the workbench has the ability to prevent static, which most manufacturers can do, and will customize the required model of anti-static workbench according to the needs of users. The second point we should pay attention to is to check whether the workbench desktop is equipped with an anti-static mat, whether the materials used in the workbench are anti-static materials, whether the workbench itself has an anti-static grounding wire, and whether the workbench as a whole has been sprayed with electrostatic electricity.

A high-quality anti-static workbench must have at least the following three aspects:

1. The surface resistance of the overall paint spraying of the workbench should meet the requirements of anti-static.

2. The grounding resistance of the workbench as a whole should meet the requirements of anti-static.

3. The surface resistance of the workbench should meet the requirements of anti-static.

Hope it works for you.

1.Impact-resistant table features.

The table board is made of high-pressure molded fiberboard, and the surface is pasted with green soft embossed special synthetic rubber, and the four sides of the table top are edged with PVC long rubber strips to protect the table edge from damage.

Impact-resistant, shock-absorbing, beautiful, suitable for general factory pliers, machine maintenance, production line packaging and maintenance plant operations and other purposes.

2.Workbench wear-resistant table characteristics.

The table board is made of high-pressure synthetic board, and the surface is pasted with gray leather surface thermosetting resin high-pressure board, and the four sides of the table top are edged with PVC long adhesive strips to protect the table edge from damage.

Wear-resistant, suitable for general electronic factories, research institutes, laboratories, hospitals, school operations, instrument storage, testing operations, maintenance and other purposes.

3.Workbench log table board characteristics.

The table is made of beech wood and waterproof glue under pressure.

The surface is smooth and flat, beautiful and not easy to deform, oil-resistant, heat-resistant, acid-resistant, alkali-resistant, suitable for general factory operations and precision mold maintenance, instrument placement and testing, etc.

4.Workbench stainless steel table features.

The table board is made of high-pressure synthetic panel, and the surface is covered with sand-faced stainless steel plate to achieve beauty and durability.

High temperature resistance, wear resistance, oil resistance, long service life, it is a multi-functional table, suitable for general factories, food industry, research laboratories, and electronic factories clean room use.

The heavy-duty workbench can be configured with a tool cabinet, and the heavy-duty workbench desktop can withstand 1000 kg heavy-duty workbenchWorkbench with baffle plate|Fitter table.