Shenzhou notebook F440S how to set the U disk to start

First of all, the U disk should be a U disk boot disk, you can use U hero, and then enter the BIOS, find the hard disk drives in the boot and change it to the U disk as the first boot disk, save and restart, so that you can start from the U disk.

You can go to the BIOS setting column of the official website of U Qiwang to see the detailed boot USB flash drive setup tutorial.

Dear Shenzhou computer users, hello!

Hello, Shenzhou notebook set U disk start: press the power button to boot and press F2 according to the prompts to enter the BIOS interface, set the U disk as the first boot item in the boot, save and exit to start from the U disk, please know! To learn more about Shenzhou computer products, please enter the official website of Shenzhou computer**.

Power on, press F2, select Boot, there is a boot mode, select Enter, you can see that you have to plug in the U disk first, otherwise you can't see the U disk.

Hello, when you turn on the computer, press the DEL key to enter the BIOS, or press F12, and directly select the model of the USB flash drive!

Look at the manual, there should be instructions for use in it.

You can see the boot disk option of your USB flash drive when you enter the Hard Drive BBS Priorities, select the Enter key, and then go back to the boot item Boot Option 1** to see if it is the name of the boot disk just now. If not, go to option 1 and press the enter key to save and exit. Reboot to enter the PE option.

Shenzhou notebook can set the BIOS to set the USB flash drive to boot by following the following steps:

1.Press the F2 button to enter the BIOS settings interface and select Advanced BIOS Features;

2.In the Advanced BIOS Features interface, first select Hard Disk Boot Priority;

3.Hard Disk Boot Priority Selection: Use the plus and minus signs "+" on the keypad to select the mobile device, and select the USB flash drive on top. Then, press the Esc key to exit;

4.Then select First Boot Device: Select USB flash drive to boot.

5.Then reboot to start the step-by-step installation, and the installation process will be restarted several times.

According to the type of motherboard in the plagiarized question, the method of entering the BIOS setting is as follows:

2. After entering the submenu, find the Boot Option 1 item, press Enter to enter, in the pop-up window, select the name of the USB flash drive, and then press Enter to confirm.

3. Go back to the boot item, find the boot option 1 item under the boot item, and press enter to enter.

4. Also in the pop-up window, select the name of the USB flash drive, then press Enter to confirm, and then press F10 to save and exit, and the setting is complete.

You can use shortcut keys, BAI does not need to set the BIOS

Directly make DU use the quick start item to select the startup device, such as opening the DAO machine and pressing F2 F8 or F12 or something.

Back below is a list of buttons for quick startup selection on some computers, including desktop-brand computers.

For example, Lenovo notebook boot quickly press the F12 key.

F12: Lenovo, ThinkPad, Acer, Shenzhou, Dell (notebook), Haier, Samsung, Fujitsu, Toshiba, Founder, Tsinghua Tongfang, Gigabyte, HP (desktop).

F9: HP (notebook), BenQ (notebook).

F8: ASUS (desktop), BenQ (desktop).

ESC: ASUS (notebook), Sony, Dell (desktop) Note: There is an entrance to the BIOS installation system tutorial on the quick startup item page, applicable to win7, win8, win10, please adopt it, thank you.

Shenzhou computer copy into the BIOS settings booted from the USB flash drive"boot"options for bairemoveble device. du

Here are the steps to set up the zhiu disk to boot:

When the Shenzhou logo appears on the boot screen of the computer, press"esc"or"f2"button to enter the BIOS interface settings, then use the left and right arrow keys to move the cursor in the BIOS interface to select the penultimate "Boot" menu, use the up and down arrow keys to move the lower cursor to the "Removeble Device", move the "Removeble Device" to the first position with the + sign, after the setting is completed, press F10, select "yes" in the pop-up window, and press Enter to confirm.

2.arrow keys on the keyboard to move the cursor; Enter means "OK"; f10 means "Save and Exit".

There is a prompt in the boot logo interface,What is generally F1 to setup This kind of prompt,You look at the boot menu prompt which key to press,Press it。

Dear users:

Hello Bai! According to the picture you give, you also.

Press F12 to boot up, select your USB flash drive, and you're done!

The disc drive is started with the fourth one. The USB flash drive is started with the fifth. When using the USB flash drive, you must set the U well! (Self-starting program).