ADSL how to connect with the router

There are 3 holes on the ADSL, one is connected to the power supply, one is connected to the ** cable, and one is connected to the WAN interface of the router with a twisted pair (network cable), and then connected to the computer with 2 twisted pair cables, one to the desktop, and one to the notebook. Then the connection is complete, and the next thing is to set it up to surf the Internet.

Let's talk about the simple way,But there may be some small problems,It depends on your router,First set this book and desktop to automatically get the IP address,And then enter it in the IR browser of one of the computers,If not, look at the manual,The username and password are the same on the manual,Then log in and click on the setup wizard,According to your Internet everything set up OK。

Unplug the connection to the desktop, use that interface to connect to the router's WAN interface, and then connect the desktop to the routing LAN interface, and the laptop can also be connected to that LAN port, the router has four LAN ports.

Connect the network cable connected to the desktop to the WAN port of the router, and the WAN light of the router will turn on, and both the laptop and the desktop will be connected to the LAN port. After setting up the router, both can access the Internet.

The WAN port of the router is connected to the ADSL modem, and your home is connected to the LAN port of the router.

You can connect the cable that comes out of ADSL to the WMA port of the router.

It is set in the route to be entered.

IP can't be randomly divided, some are telecom, some are Unicom, and the IP is different

If you make a mistake, you won't be able to access the Internet.

Hehe, where is your IP from the brother above?

Usually only or.

People are becoming more and more enthusiastic about the current white-hot APP applications, and you will see handheld devices everywhere in Weibo, chatting WeChat, and playing applications, which shows that wireless routers are playing an increasingly important role in modern people's lives. Here's how I have compiled for you to connect ADSL and wireless routers, let's take a look!

1.Schematic diagram of the connection: **The cable --- cat --- your computer network port.

Here you need to create a new broadband connection in your win7 computer.

<> choose this broadband PPPOE. Click on it and the following image appears:

Once <> clicks on close, you'll be able to surf the internet.

The next time you're online, just tap the network connection icon in the bottom right corner of the taskbar

<> where this broadband connection is the new one you just created, you select the broadband connection, click the connection and the following screen will appear:

Enter your password and click Connect to access the Internet.

End 2: Connect with a router:

1.Connection diagram: ** cable --- cat --- network cable--- router--- network cable --- your computer network port.

2.Settings: After the connection is completed, first set the IP address of your computer, that is, open the local connection of your computer, open the network and sharing center--- local connection --- attribute ---ipv4--- double-click to enter the ipv4 attribute setting related parameters, see the following figure for details:

For example, behind your router, if the IP address of your router is, (or then you set your IP address to DNS to your local DNS address, or set to, my side is Lianyungang, Jiangsu, I set it to, (if so, then the corresponding parameters also need to be changed) as shown in the figure:

Click OK after the settings are complete, and then exit the IP settings.

Once you're sure, go to the router:

Click Setup Wizard, click Next, and select PPPoE

<> enter the Internet access and password, which is the broadband and password that you just entered with the cat alone.

After the setting is completed, the computer will prompt you to complete the setting, and you need to restart the router after completion, and you can go online after restarting the router. At this point, the setup of Internet access through the wireless router is all completed, and then you can directly turn on the computer to access the Internet, and there is no need to click on the broadband connection to access the Internet.