How do I configure and connect my router?

There are two interfaces on the router, WAN and LAN, and WAN connects to the modem.

LAN pick-up.

Settings: The IP address on the machine is set according to the router LAN setting (e.g., LAN settings, device settings:).

2 254) Or directly turn on the DHCP of the router, and it is simple to set up automatic IP acquisition on the machine!

In the router, on the WAN settings page, set the broadband connection mode, PPPOE or DHCP (dynamic IP) or static IP (in the case of PPPOE, you need to enter the broadband and password) to save it (Netcom's PPPOE must be cracked first).

You connect the main line to the WAN port of the router (there is only one), and the computer is connected to the other LAN port, and you can get on one now, which means that the main line and the route are all done, as long as you connect the other machine to the LAN port of the router, and match it to the same machine that you can get on before.

Summary. The general home-level router has 5 interfaces, which are one WAN external network port and 4 LAN internal network ports; A power connector, a reset button or reset port.

The general home-level router has 5 interfaces, which are one WAN external network port and 4 LAN internal network ports; A power connector, a reset button or reset port.

We connect the external cable to the WAN port of the router, and the computer to any port in the LAN (the laptop can be connected directly through wireless), plug in the power adapter to complete the connection process. Configure the Internet access parameters We apply for the Internet service, the general service will provide you with the Internet parameters, Internet parameters generally have 3 forms: a

Internet account is ppoe dial-up Internet access, there is an account name and password, this account is fixed, this should be saved, and it will be used often in the future. b.Dynamically obtain IP address This way of surfing the Internet is very simple, no configuration is required, and you can access the Internet by plugging in the external cable, which is rarely used in ordinary families.

c.Parameters such as IP address, subnet mask, gateway, and DNS required for static IP Internet access are provided by the service provider. This is generally used for enterprise units, and the cost of fixed IP service is much more expensive than that of the family, and this method can provide many kinds of services, such as the setting up of web servers, FTP servers, etc.

After setting the administrator password, we enter the configuration menu of the router, and we open the network parameters on the left to configure the Internet access parameters.

In the WAN port parameter settings, you can see the three ways we have just touched on the Internet, which can be selected according to your actual situation.

Next, continue to open the wireless network configuration on the left, in the basic configuration you can change the name of your favorite wifi, and set your own customized password in the wireless security settings.

The configuration of the wireless router is in the middle of the law

When the LAN port flashes when the computer is turned on, it means that the computer has successfully established communication with the router.

2. The system is connected to the router. Turn on the wifi of the computer, search for the default Bu Nianshan wifi name of the router, and connect to the wifi network. The first time you use the router, you generally don't need to enter the wifi password.

3. Enter the gateway interface. Open a computer browser and enter the gateway IP address of the nameplate on the back of the router to enter the gateway configuration interface.

4. Set up the Internet mode. Go to the WAN port settings in Advanced settings. If you need to dial up broadband services, please select PPPoE to dial up, and you can choose DHCP to get it automatically.

To dial up PPPoE, enter the broadband password, and select Automatic connection as the connection mode.

5. Set the wifi name and password. Go to Wireless Security in Wireless Settings and select AES for WPA encryption rule. Set up a wireless network key. After setting, the router will automatically restart, please enter a new wifi password to connect.

The configuration method is as follows:Go to the router's administrator interface, enter your administrator password, and click Login to enter the next interface. Click on the function options of routing settings below, enter the routing settings interface, and click on the wireless settings in the left navigation bar.

Enter the wireless settings interface, and set the parameters of your router in this interface.

A router is a hardware device that connects two or more networks and acts as a gateway between networks.

The installation and setup of the router is as follows:

2. Then open the browser and enter the management address and login password of the router. <>

3. After logging in to the background, click the setup wizard, and then fill in the corresponding parameters according to the wizard instructions.

<>6. After the wireless setting is completed, click Save, and then restart the router to use it normally.

Note: Do not connect the network cable between the router and the broadband modem, connect the WAN port of the router and the LNA port of the broadband modem, and then connect the LAN port of the router and the network card of the computer.