My CAD2005 reinstall issue after poisoning

When opening the diagram, it is still prompted that it is the CAD2004 diagram because the machine is the default is 2004, after installation, select the file you want to open and right-click, do not choose to open, select the opening method, there is 2004 and the 2005 version you installed, select the 2005 version to open it on OK, if you want to use this open all the time, you can use this open option under the selection.

Note that 2005 can open 2004 files, but 2004 can't open 2005, that is, the previous version can't open the file of the later version But if you want to open the picture drawn with a later version, you can choose the format of the dwg stored in 2004 when you save it, and you can open it or something.

Question asking me, thank you

Pirated have such a problem when opening the diagram is still prompted to say that it is the CAD2004 diagram because the machine was originally the default is 2004,After installation,Select the file you want to open and right-click,Don't choose to open,Select the opening method,There is 2004 and the 2005 version you installed,Select the 2005 version to open it,If you want to keep using this to open the application under the selection Use this open option。

Note that 2005 can open 2004 files, but 2004 can't open 2005, that is, the previous version can't open the file of the later version But if you want to open the picture drawn with a later version, you can choose the format of the dwg stored in 2004 when you save it, and you can open it or something.

Question asking me, thank you

CAD2005 and CAD2006 are stored in CAD2004 format, just as CAD2002 is stored in CAD2000 format. There's nothing strange about that. This was done so that people who used 2004 could also open files that others had made with 2005 or 2006.

If a new version has a corresponding format, wouldn't those who use genuine CAD always have to buy the new version of CAD, otherwise they won't be able to open other people's drawings

The problem is simple, 2004-2006 unified into the 2004 format. Opening with 2006 also shows the opening 2004 format graphics.

In response to the second question, reinstalling the CAD will not be the number of hours of the existing license file, that is, you will still use the previous license after reinstalling the CAD, and you will only need to re-register unless you manually delete the license or reinstall the system. Please leave me a message for further information.

Is there cad poison? Looks like I'm going to have to take precautions too.

The fatal error after the installation of CAD2010 is completed, which is caused by the wrong setting, the solution is as follows:

5. Then on the interface entered, click the [Add] button, a window will open, select [in it, click the [Open] button.

6. Finally, you can see that CAD has been added, click [Apply] and then click [OK], save the settings, and you can solve the problem of frequent fatal errors in CAD.

There is a problem with the latest driver of the Vidia GT graphics card, it is not compatible with CAD, the way to check: right-click on My Computer - Management - Device Manager, find the bottom monitor, and uninstall the driver. Then run CAD to see if there is an error, if it does not report an error, it is a problem with the driver, go to the driver of the version under the nvidia official website, it can be solved, pay attention not to upgrade the newer version.

OK,I installed another machine just now.,Equipped with nvidia quadro K2200,I don't know if it's nvidia to die.,Or Autodesk deliberately.,Anyway, the latest driver also reports a fatal error.,The problem is solved after reuse.。

The fatal error occurs while installing the CAD for the following reasons:

1. It may be that the software version is incompatible, resulting in burnup.

2. There is an error in the file itself, and there is no way to open it directly, and it needs to be reinstalled before it can be opened.

Generally, the first reason,Change a compatible version is fine.,The second reason solution is as follows:

Second, open the CAD Uninstaller and click Delete CAD File.

Third, wait for the screen to prompt "Delete CAD successfully, please reinstall CAD program".

Fourth, double-click the CAD shortcut icon on the desktop to confirm that the program has been deleted.

Fifth, open the CAD installation package, click Install Product, and reinstall it.

In most cases, it is a problem with the installation package, and it is recommended to change the installation package.

Or try to undo the installation and delete all CAD related including the registry, and then try the old slippery orange again with a new installation, but it doesn't work, you can only change the group to a ** address or version and try again.