After installing telecom broadband, connect to TP LINK, only send, not receive. The model of the cat

Dear users, hello:

It is recommended that you follow the following process to set up your wireless router again

1. Connect the computer to the wireless router, open the computer, and enter the general router address in the browser, you can check the back of the router, whether it is this address, or change the address on the back of the router.

2. Enter the router settings, select the setup wizard, select the opppe dialing type, follow the next step of the wizard, enter the dialing and password, and select auto-dialing. The setup is complete. It's best to change the router IP to when setting up the router to avoid conflict with the IP of the wireless modem.

3. The LAN port of the cat or the home interface of the network cable is connected to the WAN port of the router, and the LAN port of the router is connected to the computer. The computer can directly access the Internet, and the mobile phone and tablet can be wirelessly connected to the router to access the Internet.

4. If it cannot be used after setting, it is recommended to dial 10000 to see if the physical address is bound, or to check whether the router is damaged.

Anhui Telecom will serve you wholeheartedly, I hope mine can get yours.

If you have any questions, you can go to the Anhui Telecom online business hall to consult the staff, Anhui Telecom officially opened the pre-sale of Redmi 1s and Xiaomi Mi 3 Telecom version, you can go to the online business hall to view the details, I wish you a happy life!

Your dialing settings, without adjustment.

Haha, it's easy! Enter the wireless modem, there is an infinite bridge in the WLAN settings, enter the MAC address and SSID of the router

The router enters the MAC address and SSID of the wireless modem and the router turns off the DHCP function.

Telecom Huawei HG523 wireless router setup method:

Home Network Environment Cabling]:

1. There is a cat (modem): cat (modem) - router WAN port; The LAN port of the router --- a computer.

2. No modem: network cable --- router WAN port; The LAN port of the router --- a computer.

[Computer enters the router]:

1. The computer IP and DNS settings are automatically obtained.

2. Open the browser, enter the general router address in the address bar is this or check the login information on the back of the router) Enter the route - enter the user name and password, (the default is generally admin).

Set Router Dialing]:

1. In the [Setup Wizard], select [PPPoe Dialing] (some are ADSL Dialing), enter the Internet user name and password according to the prompts, and save.

2. In [Network Parameters] --WAN Settings], select [Normal Mode], and select [PPPoe Dialing] in the three options of [Connection]. The next step is to select [Auto Connect], Save, and Exit.

Turn on the wireless function of the router

1. Select Wireless Settings --- Basic Settings.

2. Check [Turn on wireless function] and click Save.

Set wifi password

1. Wireless Settings - Wireless Security Settings - Select [WPA-PSK WPA2-PSK].

Authentication Type: Automatic.

Encryption algorithm: AES.

The PSK password is the wireless password. Set the required password.

The new business, according to the local situation, must be correct, unclear ask 10000. mode, routeBinding, ssid1 must be selected. Others use default data.

Hello, I'm the same as your cat's model, I can't read the original password, I can really say no.

Hello. According to your description. Based on the wireless signal and routing function of the wireless cat, it is much inferior to the wireless router.

And the stability is also much worse. It is not recommended that you hack cats for use. According to your situation, it is recommended that you ask telecom installation and maintenance personnel to set it up for you to use normally.

Hello. Hopefully, the following will be helpful to you.

This means that your routing settings are incorrect and your router is not connected to the network. You can connect the LAN port of the cat to the WAN port of the wireless router, refer to the label address on the back of the router or the instructions for use, enter the router setting interface, start from the setup wizard, set up the router according to the prompts, select PPPOE dial-up for the connection mode, fill in the username and password, set the wireless network password (letter + number combination is recommended) to save and restart.

Anhui Telecom's online business hall is carrying out the activity of "grabbing New Year's goods", and a variety of star machines have the lowest explosive price, dropping by 1,000 yuan! Large-screen smart phone discount**, apply for broadband and have a chance to get iPad mini!

If you still have questions, please keep asking. Have a great day, thank you!

1.Connect the hardware. Connect the network cable from the cat to the WAN port of the router, and then use another network cable to connect the computer to the LAN port.

2.Log in to your router. The computer side obtains the IP address from Yutong Take, enters it in the address bar of the wheel Lu ie, and enters the login name and password behind the router in the dialog box, which is generally admin.

3.Set up your router. Enter the broadband, password, and wireless full setup under the guidance of the setup wizard. After setting up the save and exit, the computer should now be able to access the Internet.

4.Turn on the wifi on your phone, search for the wireless network, and enter the password you set in the router. The phone will automatically connect to the router and automatically set the IP address. Then you can go online to the town.