How do I connect my company s network with a router?

Yes, ask your company's network manager to assign you an IPYour router is connected with a bridge.

If you are reporting the MAC of your computer, then you need to re-report the MAC address of the router. Just let the unit re-bind you. The router can be set to dynamic IP mode.

The main thing is that you have to find out what the physical address of the computer you are reporting is???

How to set up your router to surf the Internet.

Log in to the management interface How to set up the router to access the Internet.

1. Enter the router management address.

Open the Internet Explorer browser on your computer's desktop, clear the address bar and enter the router management IP address (or, press enter and the login box pops up.

2. Log in to the management interface.

In order to ensure the security of your device, you need to set up the management router when logging in to the router management interface for the first time. Set the password as prompted. As shown below:

Note: Some routers need to enter the management username and password, and you can enter admin.

Setup Wizard. 1. Start the setup wizard.

Once you are in the management interface of your router, click on the Setup Wizard, and then click Next.

2. Choose a way to access the Internet.

Select PPPoE (ADSL Virtual Dialing) as the Internet access method and click Next.

3. Enter the Internet broadband and password.

Enter the broadband and password provided by the carrier in the corresponding setting box, and make sure that the password is entered correctly.

Note: Many users are unable to access the Internet due to the wrong broadband password, please carefully check whether the broadband password is correct, and pay attention to whether the Chinese and English input, letter case, suffix, etc. are complete. How to set up the router to access the Internet

4. Set wireless parameters.

The SSID is the name of the wireless network (you can set it according to actual needs), select WPA-PSK WPA2-PSK and set the PSK password, click Next.

Note: The wireless password is used to ensure the security of the wireless network and ensure that it is not used by others.

5. The setting is complete.

Click Done, and the setup wizard is complete.

Note: Some routers need to be restarted after the settings are completed, click Restart.

The setup was successful. After the setting is complete, enter the router management interface, click Running Status, and check the WAN port status.

You can log in to the wireless router and follow the wizard to select the automatic judgment of the Internet access method, or you can directly set the gateway to.

If you don't connect the wireless router and connect that network cable to the computer, can you surf the Internet?

If you can access the Internet, then you need to know what is the MAC address of the wireless network card of this computer, you can start - run - enter cmd - enter - the dos window appears, enter the command: ipconfig all, you can check the MAC address.

Then connect the network cable to the wireless router,There is an item in the wireless router to learn the MAC address,Write the MAC address on the computer you just now,Start it from the new OK。

Taking TPLink R4149 as an example, perform the following steps:

1. The company's network cable is connected to the WAN port of the router;

2. Log in to the R4149 router and set the Internet mode to dynamic IP mode;

3. If the R4149 LAN port address is the same as that of the higher-level router, you need to change the LAN port address to other networks, for example, the higher-level is to save and restart.

Put the IP address as: as your D-Link TL-WR710N's wireless router WAN address, change the LAN of the wireless router to a network segment, whatever as long as it is not 1 network segment, and then DHCP is turned on, connect a network segment from the unlimited routing LAN to your company computer, and the local connection of the computer is set to automatically obtain the IP (I hope your computer has the permission to change the IP), and the mobile phone is connected to the wireless. I wish you success and please take my advice.

Log in your route to the left toolbar and take a screenshot.

Steps:1The computer is connected to the LAN port of the router.

2.Enter the routing management interface (if you can't get in, change the computer IP according to the manual) 3Run the setup wizard, select a static IP address to access the Internet, enter the IP address given by the company, and save it.

Addendum: Change your LAN port IP to.

The default IP address of your route is an internal address.

However, the address distributed by the company's switchboard and the address of your router are in the same network segment, so they cannot be used, and there is a conflict.

You look at the LAN port of your router marked with the numbers 1234. Just plug one of these into it. Don't plug in the wan.

First of all, enter the online neighbor, set the intel protocol 4, and then confirm the return, enter the browser, enter, enter the router name and password, all are admin, enter the router settings, enter the broadband account and password, and then set the router password.

How to log in to your company's router:

1. Check the IP first, method: win+r--- enter: cmd--- enter in the black and white interface: ipconfig, press enter.

4. Pop up the router login interface and enter the default login username of the router: admin and password: admin (if it is incorrect, look at the back of the router).

You can enter ipconfig enter in the dos menu in Start-Run-Enter-Enter, and then find your gateway below, use the gateway to enter it in the browser, if the gateway still can't go up, that is, the access port is restricted, and you can only find the network manager.

In this case, you should report to the NMS.

Wireless routers are connected to the company's internal networkHow to set up Level 2 routing.

1. How to connect two routers.

1. There is a cat (modem): cat (modem) - router 1wan port; Router 1LAN port --- router 2WAN port; The 2lan port of the router --- the computer.

2. No modem: network cable --- router 1WAN port; Router 1LAN port --- router 2WAN port; The 2lan port of the router --- the computer.

Second, the setting method.

Before setting, disconnect the WAN port cable of the second router and plug it in after the setting is complete.

1. Set the IP segment of the second router.

After restarting the router, the address to enter the router is.

2. Set up a second router to access the Internet.

Check the IP details of the computer connected to the first router. (win+r--input, cmd--input:ipconfig all [remember: ip, mask, gateway, dns]).

Set it on the second router, and select Static IP in the Setup Wizard. Enter the IP that the 1st router does not use, and the others: mask, gateway, DNS settings are the same.

Restart your router once it's set up.

3. After restarting the router, the setting is completed, and the line of the 2WAN port of the router is reconnected to make the router 2 network normal.

Set it to dynamically assign IPs, and you're good to go.

You first default the route, don't plug in the external network, connect the computer to the wireless router, enter your route, set the wireless network name and password inside, turn off DHCP, save and restart the route, and then connect the external network cable to the LAN port to access the Internet. Because this is to use the wireless router as a switch, if you want to enter the wireless router setting, you must disconnect the external network cable to enter, and if you don't open it, you may jump directly to the main routing interface.

Generally speaking, plug in the Internet cable and you can get on.

You first determine what the router gateway is for your company's internal network.

Then log in to your own router, change the gateway of the router and the different gateways of the company's intranet router, and then connect the main network cable to the WAN port of your router Configure the WAN Internet access to dynamically obtain the IP address, and there is a second way: Turn off the DHCP function of your wireless router, and then connect the main network cable to the LAN port of your wireless router.

Configuration method for installing wireless router on the company's network:

1.The router is connected to the network.

2.The system is connected to the router.

Turn on the wifi of the computer, search for the default wifi name of the router (the nameplate on the back of the router is written), and connect to the wifi network. The first time you use the router, you generally don't need to enter the wifi password.

3.Go to the gateway page.

Open a computer browser and enter the gateway IP address of the nameplate on the back of the router (generally, enter the gateway configuration interface. (This interface will pop up automatically for new routes).

4.Set up a way to access the Internet.

Go to the WAN port settings in Advanced settings. If the broadband service requires dial-up, select PPPoE dial-up, otherwise you can choose DHCP to get automatically. To dial up PPPoE, enter the broadband account password, and select Automatic connection as the connection mode.

If DHCP is automatically obtained, you do not need to enter this field.

5.Set the wifi name and password.

Go to Wireless Security in the Wireless Settings and select WPA2-PSK mode for Security Mode. Select AES for WPA encryption rule. Set up a wireless network key. The router will automatically restart after setting, please enter a new wifi password to connect.

6.The configuration is complete and you can enjoy the network.

The following will come out after searching on the Internet, and if you don't understand, you can ask me.