Ask for help on how to fix the problem of frequent drops on the D Link broadband router

According to the phenomenon you mentioned, I think there may be three reasons, the first is the presence of the ARP virus, which needs to be disinfected.

Second, Netcom restricts the use of routes, and scans regularly to determine whether you are using routes, and if so, block for a while.

Third, if there is a problem with the routing physique, find a seller to change it.

If you can rule out your local restrictions on setting up your own router to access the Internet (generally Netcom will restrict you from stealing routes to surf the Internet, and interrupt the signal every ten minutes), then the problem must be on the router, and it is really difficult to talk about not being on the spot.

Where is the problem, restore the original settings or try to change the route to see if it's good, sometimes Netcom is in the repair line.

Shared internet access may also be restricted when on the road.

Oh? Yours is also the D-Link DI-504M model, I use this too, a month ago, you said that the problem is very frequent, but change the socket bar OK. If the voltage regulator is unstable, it will lead to unstable routing.

You have to make sure that it's not the neighbor who used P2P to play a prank on you and make you break off

When the router is set and the password, there should be three options below.,Always connected,Connect on demand,Like,There is an automatic drop setting in one item,It's usually fifteen minutes.,You see if your item is ticked.。 If the settings are normal, it means that there is no problem, then you have to ask your network provider, ask them if they can use multiple people on one line.

Enter the settings interface of the router, and there are three connection methods in the WAN settings, 1: Auto Connect 2Auto-disconnect when idle or timeout, and after ( ) minutes if no access request is found, auto-disconnect!

3.Connect manually and see if there is a problem with the router settings.

10 A few minutes is a bit off-top, and my TP route is often dropped, and I dismantle the shell and blow the line off with a case fan.

It's not the router's problem, it's your local connection settings, you can see for yourself.

What happens when the TPLink router often drops connections? TPLink is the most commonly used router, and most users should have experienced the situation that the TPLink router often drops down, which is really unbearable. There are three reasons why the TPLink routing only device is disconnected, and the following solutions will be brought to you.

1. The wireless network is unstable when the wireless network drops frequently, but the network cable is normal.

This situation is generally caused by too many wireless product devices and using the same "channel" in the same scene, you can try to modify the "channel" of the router's wireless network, as shown in the following figure:

Open the router background, find the wireless settings - basic settings, and then you can see the "channel", generally the default setting here is "automatic", we can modify it according to our own situation, range 1 to 13.

2. The wireless network and plugged in the network cable are unstable.

a. First check whether there is a problem with the network cable plug on the router, cat and other equipment, whether the network cable socket is loose, etc., the easiest way is to replug and unplug the network cable on all devices or replace the network cable for troubleshooting.

b. Call the network operator and let them come to the door for maintenance, so as to eliminate the problems caused by the external line and the operator itself.

3. The wireless router itself does have a problem.

If you are really unfortunate enough to buy a router with quality problems, then you can first troubleshoot the problem by upgrading the router firmware or restoring the factory settings, if it doesn't work, then you have to consider whether to find a seller to return the product or buy a new product directly.

Heart of Kings 2 click to play

If you have more than one computer, check to see if there is any computer poisoning that is causing an ARP spoofing attack.

Start - Run -"arp -d"After that, you can go online to prove that there is an ARP attack.

It is recommended to install 360 ARP fire protection period to solve the problem beam masking.

Without a router, directly connect the computer broadband to dial-up the Internet, if there is no drop, it may be a problem with the router.

If you don't use the router and the connection is dropped, it proves that it is a problem with the broadband line, and you need to call the operator ** for repair.

If you can go online, you can determine that it is a router problem.

If the router is used for a long time, it will work unsteadily.

Some low-end home routers make socks more likely to drop off and crash after a period of time.

Just change your router

Touch the router to see if the heat dissipation is not good, the gray Peixin words will be cleared, improve the working environment of the router, and set up a high router to make the bottom ventilation better.

I've also found this issue with dlink before. No solution. After switching to tplink, there is no such problem. I don't know if it's right for you.

The cost investment is also suddenly a person hair has a wide range of one-day styles, she suddenly turned back to the hot typhoon, the hot day is rich in engineering, fire company peculiar.

You use China Telecom's fiber optic access, I sometimes do this. Chain dress spring garbage line, foreign obsolete products to take back with a lack of stools. Sheds have nothing to do with routers.

You have an unstable network, there are several possibilities:1It's a small chance that you're having a problem with your physical connection.

2.Insufficient bandwidth for your current web application and need to increase the bandwidth.

3.Someone uses BT software to maliciously grab bandwidth, causing you to be unable to use the network normally. Or someone uses some network management speed limiting software to restrict the following machines.

4.Viruses in the LAN computer keep sending junk data to the network, blocking your normal data passage.

I have not summarized the above points completely, but it is difficult to really check them. There is currently a router on the market called Immunity Wall, which seems to solve several of the problems I listed.

Now the ARP problem, their method is more able to solve the root cause, and they manage each terminal. Each terminal is forbidden to send spoofing messages to the outside, and there is no source of attack. The problem is solved.

Wireless routing is best maintained at a temperature. Put it in a place with good heat dissipation, if the heat dissipation is not good, the temperature inside will drop as soon as the temperature is high.

If the heat dissipation is good or the connection is dropped, upgrade the firmware, and repair or replace it if it is not good.

The reason is that in order to reduce costs, TP-Link manufacturers combine the heat sink on the wireless router network card chip and the screen on the wireless chip.

Mask minus. The wireless router chip runs at high temperatures for a long time, causing the wireless router to be extremely unstable, and this situation and the network.

It doesn't matter if you connect to the external network, in fact, the more common root cause is because the chip has poor heat dissipation, and you can sell it by adding a heat sink.

Solution: 1. According to the side length of the hot chip, take two stapler needles. Cross the two staples (smeared dots in the middle to form silicone).

Boxed, just covered with chips.

2. Bend the staples carefully inward, leaving a gap to flow air, and try to ensure heat dissipation.

All right. <>

3. Smear the bottom of the radiator with heat dissipation silicone and stick it to the hot chip.