-
Anonymous users2024-02-11If you don't have broadband at home, then you need to apply for broadband first.
If you have broadband, continue below.
Go buy a wireless router, about a few dozen yuan.
Fill in your Internet access and password into the router, turn on the wireless function, turn on the DHCP service, and set it up simply.
Set the IP address of your laptop's wired NIC and wireless NIC to be obtained automatically by the gateway.
Next, you can surf the Internet wirelessly or wired.
If you don't understand something, let your classmates, friends and colleagues who know how to use the computer teach, and it's very simple to set up a wireless router.
-
Anonymous users2024-02-10When you go to the place where you repair your computer, you will usually sell a router, buy one, and they will install it for you, or it should install unlimited connections for you, hoping to help you. Amitabha.
-
Anonymous users2024-02-09If you don't know how to connect to broadband, you can also play with a laptop, hehe. What system to install,The minimum XP comes with a network card driver,win7,8Not to mention,You only need to set up a new broadband connection,That is, your password,Now XP is automatically installed with a broadband connection,You only need to enter the password on OK,win7,8 complex points to open the network and sharing center,Then set up a new network connection,Next, step by step according to the words inside,The word should be recognized!
-
Anonymous users2024-02-08Talents, have a laptop and can't connect to broadband? You don't have to be busy, just call 10,000, and someone will come to the door for free repair.
-
Anonymous users2024-02-071. Enter your wireless router, you will see the indication that the wireless device needs to enter, determine whether it is your machine, and some people use the network card to connect to other people's wireless networks, and set a login password for the machine to complete the setting.
2. Open your laptop wireless network card, click to find the wireless network, click to connect and enter the password in the login window.
3. Select the correct SSID to connect to the wireless networkSSID (Service Set Identifier) is used to distinguish different networks, that is, different routers, in order to distinguish the name of the personalized convenience in the router, double-click the access point connection of CMCC in the searched wireless network.
4. At this time, the red cross on the "wireless network connection" icon in the lower right corner of the computer desktop should disappear, and you can view the status of the current wireless network connection after double-clicking, including the name of the connected network (cmcc), signal strength, etc.
-
Anonymous users2024-02-061. Click the computer-like icon in the lower right corner of the screen on the computer screen, and mark it in the red box, as shown in the figure below.
2. Select Broadband Connection in the pop-up selection.
3. On the new screen, select "Set up a new connection" in the image below.
4. Select the settings for broadband or dial-up connection in the figure below.
5. Enter your ISP name in the image below, usually your broadband mobile number, then enter your password, and finally click Connect.
-
Anonymous users2024-02-052.Click Set up a new connection or network.
3.Click Connect to the Internet.
4.Select Still want to set up a new connection.
5.Select Create a new connection, then click Next, tap Broadband, enter your username and password, and then tap Connect.
-
Anonymous users2024-02-04If there is only one computer, connect the computer directly to the cat, and then use the dial-up software on the computer to dial up the Internet. If you need to share, you can buy a wireless router, connect the WAN interface of the router to the modem, and configure the broadband account and password on the modem. The computer is connected to the LAN interface of the router to access the Internet directly, and the mobile phone is connected to the wireless network of the router to access the Internet.
-
Anonymous users2024-02-03Open the broadband connection without a router and enter the corresponding account and password to log in; If there is a router, install the router first.
-
Anonymous users2024-02-02Plug in the internet cable, connect a router, and set it to dial-up.
Generally speaking, private wireless routers can also be set to automatically assign IP (that is, change the DHCP setting of wireless routers to enable), so that when connecting wireless routers and CMCC-edu, you don't need to set IP addresses, which is more convenient.
Error 815" is a broadband connection error message for the computer's operating system Windows Vista, which is equivalent to error 678 on the Windows XP system, which is the remote computer not responding. >>>More
The network cable must be connected in 100m mode to ensure that line 1236 is unobstructed, and in 1000m mode it must be fully connected to 8 lines. When we encounter damage in the line, we can reduce 1000m to 100m for use, but we must ensure that the 1236 numbered line is unobstructed. The number 1236 here is the number of the copper plate of the network card contact, the simple point is that there must be two sets of lines that are connected, and then in order to avoid signal crosstalk, it must be in contact with the 1236 copper plate of the network card in order. >>>More
Yes, if you want to surf the Internet on your laptop, you can prepare a wireless router and use wifi to access the Internet, the specific operation is as follows: >>>More
I think there is a problem with what you asked, if you have a route, you should be able to go to the Internet directly, no need to dial up the connection, the router has been dialed up, and you can open the web page directly. >>>More