Telecom Wireless Cat WiFi set Huaqin HG100N 100

1 Log in to the settings page of the wireless modem, set the PVC to 8 35, fill in the Internet where you should fill in the Internet, fill in the password where you should fill in the password, and then dial up to connect to the network.

2 Open the wifi settings page of the wireless modem, turn on the SSID broadcast, if you want to set a wireless password, set a password, connect the wireless SSID with the computer after saving, and the IP is set to automatically get it.

I'm sorry, upstairs, Telco doesn't offer routing debugs for cats. If you need to debug, please consult the cat manufacturer after-sales or online inquiry to crack it yourself, just like the root of the mobile phone, the cracked cat, Telecom does not warrant, only guarantees that it is broken to reset you into an ordinary cat.

Send it to disassemble the machine for free cracking.

Since it's a wireless cat of telecommunications,Generally, they have been set up for you when they are installed,What is the need to set it yourself,Even if you want to modify,It's just to modify the network name、Password and encryption method,There is a login method at the bottom of the cat。

As for the rest, you won't and can't change it, there are indeed other problems that can't be done, isn't it okay to call the telecom to the door?

Could there be a mistake downstairs? Cats are "provided by telecom when installing broadband" Internet access equipment, maintenance lines and related equipment so that you can access the Internet normally is their responsibility, if there is a problem, do not look for telecom to find whom? Even if the cat is broken and needs to be replaced in the end, it is also a matter between telecommunications and manufacturers, what does it have to do with our customers!

Enter the router first: username: telecomadmin, password: ne7ja%5m

Dot: Network - Broadband Settings Internet Link Inside the second line VPI VCI value varies from place to place, ask the telecom company.

After selecting the route mode, there will be three options below, the first is to automatically obtain the IP, the second is to fix the IP, generally we use the third PPPoe dial-up method, to select the username and password below, the server is empty.

You don't need to move anything else, click save and restart, and you're good to go.

The best way is to buy a router to use, which is simple and convenient, but requires a certain cost.

The equipment of Huaqin mentioned in the title is relatively rare, and the cracking method has not been published on the Internet for the time being.

The setting was successful to say,I'm also this.,It's not good to study for a few days.,I saw a setting tutorial on the Internet.,But after going in, the settings can't be saved.,Finally, it's restored to the original kind.,

Is your broadband an adsl in the form of a plugged cable?

If you need to check the bill and pay the phone bill, please log in to the online business hall of Anhui Telecom. Have a great day!

Hello: You have to change the mode of the cat through the bridge to connect to the router and use.

1.The computer browser opens "This is the login interface for the wireless cat settings, account: telecomadmin password: ne7ja%5m (this messy account password is the telecom administrator, you can copy and paste the past, pay attention to the number of digits)

2.After entering the wireless modem settings interface, select "Network - Broadband Settings". Take note of the VPI and VCI values in the middle of this interface.

3.After the connection name is a drop-down menu, select them one by one, and click "Delete" at the bottom of the screen to delete the drop-down menu.

4.Select "New WAN Connection" after the connection name, then fill in your broadband account (** with area code) and password at the bottom of the interface, and other settings do not need to be changed (VPI and VCI should be the same as those in the second step), and finally click "Create" at the bottom.

Setup, please skip this step if you don't have ITV. Continue to "Create WAN Connection", select "LAN 2" (that is, ITV port) for the binding option, select "Bridge" for the mode, click on the drop-down menu for "VPI VCI", select the previous step, and finally click "Create" below.

6.On the wireless modem settings page, select Network - DHCP Configuration, and enable the DHCP service checkmark (default).

7.Wireless cat settings interface, select "Network - WLAN configuration", change the name and password of WiFi (no problem if you don't change it, but the default is not easy to remember.)

8.On the Wireless modem settings page, select "Management - Device Management" and "Restart". (There is a "factory reset" below, for help).

9.Delete the "Dial-up Connection" on the computer and fill in the IP &DNS to access the Internet.

10.After connecting to wifi on your mobile phone, you can access the Internet without PPPOE.

Hello, you need to use the super network management password to open the routing settings, you open the web page to log in with the account password, open the network - broadband settings.

Establish a new connection, carry the service Internet (enabled), the mode route (PPPoe), use NAT, enter your account and password to access the Internet, and confirm.

Because you didn't get in with a super password.

telecomadmin

ne7ja%5m

These are the superusername and the superpassword, respectively.

Are you sure this has a routing feature? Dial in the computer to see.