How to connect a wireless network via ADSL

You will need at least the following equipment:

1.Wireless routers. This is placed in your home and connected to the modem. It looks a bit like a modem, but it's also a box that needs to be powered.

2.Wireless network card. This is connected to your downstairs computer and used to receive signals from wireless routing. This depends on the specifics, there are external ones, there are built-in ones, and if it's a notebook, most of them are also integrated into the machine.

But I think this has the following drawbacks.

1.The ** of wireless routers is more expensive, and the low-end ones are around 300. And according to your needs, your transmission distance is at least more than 30 meters, so you have to choose a router with high transmitting power, so the cost is very high.

2.Due to the relationship between wireless Internet protocol and hardware technology, the speed of wireless connection will be relatively slow. No matter how much bandwidth your broadband has, it's still slow. It depends on your wireless router and wireless card. One thing is for sure, though, it's definitely slower than the wired one.

You can go to the computer city first.

Weigh the pros and cons before making a move.

It's totally possible, it is recommended that you buy a set of wireless router and wireless network card, the market price is generally about 300 yuan, the wireless router is installed on the 11th floor, the wireless network card is installed on the 1st floor, and then as long as the router and adsl cat are opened on the 11th floor, the 1st floor is already on the Internet.

I think the most cost-effective thing is that you ask the people upstairs of your small store, that is, the people on the second floor, and ask them if they want to install network cables, and you can assemble them, and then pull a network cable from the second floor and use the router to surf the Internet.

It also saves money and is convenient.

You still spend money on those wireless devices.

Buy any brand of wireless router on the market to build a wifi wireless network.

Connect the ADSL to the WAN port of the wireless router with a network cable, and connect the LAN port to the computer host with a network cable, and wait a while, the computer host will get the IP address assigned by the router.

Check the gateway IP address of the computer network connection attributes, enter the gateway IP in the browser address bar to open the settings interface, network settings - WAN port settings, select PPPoe mode to surf the Internet, enter the broadband account password, and then check the "running status", wait a while, see the external network IP appear, it means that it has been connected to the Internet.

Open the router's wireless settings, enter the SSID, that is, the name of the wifi, and the encryption method, which is generally the default, or you can choose WPA2 encryption. The most important thing is to set a password of more than 8 digits, preferably a combination of uppercase and lowercase letters and numbers. Once all the settings are complete, remember to save it, and then restart the router.

The built wifi network can be used by computers and mobile phones at the same time. Both home 2m and corporate 4m ADSL can be connected and set up in the above way.

First things first: clarify the concept, the difference between Wi-Fi and ADSL. The two are not the same concept, and it doesn't mean that you add a general ordinary wireless router and it's useless.

wi-fi。To put it simply, it is actually a wireless access standard, which uses wireless access at one end and optical fiber at the other end to seamlessly access the Internet. That's why the speed is so strong.

Well, let's look at it again, if you want to use Wi-Fi, there are three conditions, the first is signal coverage, that is to say, if your place is a Wi-Fi "hotspot" area, the domestic coverage is still relatively limited, generally only in large public offices, high-end places, ordinary private houses generally not. Don't think that you can have coverage near you, Wi-Fi coverage is limited, even upstairs and downstairs, separated by a thick wall, the signal is difficult to penetrate.

The second question is login access. At present, as far as I know,In addition to the mobile seems to have a free experience (estimated to be over),The other two want to use Wi-Fi resources also need to have an account password.,This。。 There you know ...

It's just that it may ask for money... Specifically, you have to ask the operator (Wi-Fi resources are shared by the three companies, but the charges are different, after all, there are many things in the optical fiber line, and the telecom takes the lead in arranging...).

Finally, to solve the third problem, hardware problems, now there are a lot of Wi-Fi sold outside (including operators) that can support domestic standards, but the wireless router that supports Wi-Fi is really not heard of, and it is generally a 3G wireless network card with Wi-Fi function attached.

If you want a wireless router with wifi function, some routers only have WLAN and do not support wifi, so you must ask this when you buy it, but you can generally try it on the spot.

Wireless routers can be used if you don't want to buy you can also use a laptop to get specific search on the Internet.

Just add a wireless router.

Plug a wired broadband network cable into the wireless router WAN port, and then use a network cable to connect directly to your laptop (or desktop) from the LAN port. Then open the browser, enter generally, or, (see your manual) enter the management account and password, generally admin, enter the setup wizard, fill in step by step, according to your broadband**Make a choice, if it is adsl, you need to fill in the username and password, if it is a broadband with a fixed IP address or not a fixed IP address, you must fill in the necessary information, fill in all the way, very simple. For the security of data and wireless network, you go to the special wireless column to start the key, generally choose the wep method, fill in the key you want to set, pay attention to the number of key bits, see your page prompt, and then select the route in the route to restart, not manual power off, and then it's OK, search for the routing signal, enter your preset password everything OK!

1。The host can be wired. You can also add a wireless network card.

2。A wireless network card is required, regardless of the model.

3。It has to do with signal strength. It is also possible to restrict within the router. The network is divided between individual machines. Of course, it will be slow if there are many machines.

4。It is estimated that the signal will be weak. Let's look for the three-antenna kind on the Internet. It could be better.

5。**Line of course to do. The network cable only needs to be connected to the cat. Or the route with ADSL does not require a network cable.

Cut it off and you'll be nothing.

The wireless router is set up as follows:

One end of the network cable is connected to the LAN port of the router and the other end is connected to the network port of the computer.

Open the browser and enter the router account number and password as written on the router box or manual.

Point Setup Wizard.

Internet access: PPPoE

Internet ID and Internet Password: Enter the broadband account and password.

Click Next.

Wireless Status: On.

SSID: Enter the name of the wireless device.

Channel: Select 11 or 13

PSK Password: Enter the wireless password.

Other defaults are sufficient.

After the setup is complete, one end of the network cable is connected to the LAN port of the cat (ADSL) and the other end is connected to the WAN port of the wireless router.

** Wire is attached to the cat.

The network cable that gets off from the cat is connected to the WAN port of the router.

The computer is connected to the LAN port (you need to set up the router first).

Open the browser,Enter the address is generally like this)Account admin password admin,The general account password is like this,If not, look at the router,There must be something written on it。

Setup Wizard and select "PPPoE (ADSL Virtual Dialing)".

Next, fill in the broadband account number, password, and you're done.

Then, set it up wirelessly.

Select Turn on wireless.

Set a wireless password.

The wireless router you buy will have a manual that will teach you how to access it step by step. Take the access of my home as an example: the hardware connection is first of all the power supply of ADSL and the router, and then a network cable is connected between the two, and ADSL is also connected to the ** line.

Once you've wired your hardware, the next step is to set it up on your computer. First of all, ADSL dials in to connect to the Internet, then enters the IP address of the router on the browser, enters the router's settings page, and sets your router network name and password, so that when all the wireless signals that find your router name, connect to the network, enter the password, and access the Internet.

Such questions are often raised. Posted on**.

Just connect the network cable, and then find the router's management driver on the Internet against the model to set a password or something.

Follow the instructions to log in and set up.