How to cut the endurance board to be more correct

The specifications of PC boards are usually fixed, although there are also customers with special needs, who want a variety of specifications, such as cutting, processing, etc. At this time, in order to save money, it is probably necessary to cut the PC plate.

1.When using a manual or motorized bow saw, the plate manufacturer should clamp it to the worktop to stop unwanted vibrations.

2.To stop scratching your appearance, do not remove the mask. When finished, the edges of the high-tech panels should not have grooves and chips.

3.This kind of essentials is to use the place of the job, which is the most convenient and simple cutting essentials that are most commonly used without large cutting machines.

4.The cutting of this plastic requires a special cutting machine to be able to cut the plate with full force.

Do not use the traditional knife edge or serration to cut the plate, which can easily cause the PC plate to be damaged, and the cross-section will definitely not be flat.

There are now three types of PC sheets that can be cut.

1. The grinding machine is properly cut in the process of producing a small amount of plates, and the cutting cross-section does not ensure that the pipe is smooth, and PC fine chips occur.

2. The domestic large-scale plate mechanical cutting machine tool can ensure that the cross-section is smooth by using the cutting machine, but PC sawdust also occurs.

3. The inlet sawdust-free cutting punch can ensure that the cross-section is smooth and PC sawdust does not occur.

When cutting endurance plates, dust will be generated during the cutting process. At this time, water is generally put next to the chainsaw, and when the chainsaw is cutting, it will always flow down, so that the dust generated will not fly everywhere during cutting, and it is also convenient for future cleaning. When cutting the endurance board under the saw, it must be slowed down, and it is also necessary to maintain a balanced force to cut, and when it is about to be cut, the cutting speed must be fast.

The saw edge is relatively flat and will not produce the truncation of the plate.

At the same time, it is also necessary to pay attention to clamping the plate when cutting, and the endurance plate can also be fixed. Prevent vibration during cutting, resulting in uneven cutting and inability to use. It can also prevent friction between the surface and the table surface of the endurance board, resulting in a very rough machined surface.

Hello, you can use a wire cutting machine, I know that Foshan Sanshui Hongbo building materials can be processed.

PC Endurance Board Cutting Method and Precautions: The general width specification of PC endurance board is as follows, but there are many customers who need PC endurance board in particular, and the specifications required are diverse. In order to save costs, this requires us to cut and cut.

When cutting, you need to pay attention to the sawdust, the sawdust will emit towards the air when cutting, and the PC endurance board (not anti-static) will be attached to the PC plate when cutting, and it is very difficult to clean. Therefore, it is necessary to use dry compressed air to blow out the groove when cutting. It can reduce the emission of sawdust to the air, and has the effect of cleaning the PC endurance board, so that the cut PC endurance board is clean and tidy.

Generally, endurance board manufacturers will have board cutting machines; This kind of equipment cutting is very convenient, as long as the plate to be cut is positioned according to the required specifications; Drop the platen that holds the plate in place, and easily press the device start button to the required size endurance plate. With this kind of equipment, labor costs are continuously saved. At the same time, it also improves the efficiency of the same work.

Production standard workshop equipment can easily and accurately cut PC endurance plates. The most common tools used are circular saws, hand saws and bow saws. Circular saws are commonly used, and this kind of cutting is more common.

The cutting speed is fast, the cutting is convenient, and the size cutting is also very good! Circular saws should use fine-toothed saw blades.

When using a manual or motorized bow saw, the plates should be clamped onto the table to avoid undue vibrations. To avoid scratching the surface, do not remove the protective film. When finished, there should be no grooves and chips on the edges of the PC endurance board.

This method is often used in the construction site, and it is a convenient and simple cutting method that is not commonly used by large cutting machines.

If it is cut in the production workshop, professional cutting tools can be used, such as circular saws, hand saws, bow sticks, etc. It is more common to cut endurance plates with circular saw blades, which can accurately grasp the size and use it more quickly. When cutting, pay attention to the sawdust, because the endurance board has no anti-static properties, when the sawdust is emitted into the air, it will go to the endurance board, and it is difficult to clean up after cutting.

When cutting, you can blow out the groove with dry compressed air to keep the sawdust out of the air, and the endurance plate can be kept clean and tidy after cutting.

Manual or motorized bow saws are often used on the construction site, and the endurance plate should be fixed and clamped on the table to avoid vibration during cutting. The protective film does not need to be removed to prevent cutting and scratching the surface of the plate. This endurance plate cutting mode is more convenient when there is no large cutting machine.

Endurance plate cutting precautions.

1.When cutting, pay attention to the endurance plate should not be stained with chemical solvents, if it is wet, you need to wipe it clean immediately with a soft rag dipped in alcohol, otherwise there may be cracking first.

2.If there is dust on the surface of the endurance board, rinse it before drying it with a rag.

3.It is best not to tear off the protective film when cutting, and tear off the protective film after installation, which can avoid scratches on the surface of the endurance board.

4.Note that the endurance board should not be placed on a wet cement floor for a long time, and avoid contact with liquids such as acids and alkalis.

5.After cutting, it should be placed in a cool place, not exposed to the sun, and it is best to store it in a ventilated and dark room.

With staggered teeth of the PC board special saw blade, hand-held is a circular saw, sliding table saw, computer panel saw can be cut, there are two points:

1) The plate needs to be fixed and cannot be suspended, and the cutting process cannot be shaken to avoid small cracks.

2) The cut saw blade must be a special saw blade and a staggered tooth saw blade.