What is the specific registration process for the 2020 first level cost engineer exam?

1) General application process.

1.For those who have not registered (applying for the exam for the first time), they should first truthfully register their personal information (such as name, academic degree, ID number, mobile phone number, email address, etc.). After successful registration, upload your electronic ID photo (**For processing tools and methods, please refer to the "Service Guide" column on the homepage of Zhejiang Personnel Examination Network).

**After passing the verification (usually 24 hours later), the applicant will log in to the online application system again, read the "Commitment System Notice" and "Application Instructions", and then enter the application information entry interface, further fill in and complete personal information (such as professional working years, major, work unit and address, professional and technical level or title, etc.), and correctly select the registration information (such as examination level, major, subject, registration point, etc.).

2.Registered applicants, after logging in to the online reporting system, directly fill in personal information (such as name, academic degree, ID number and mobile phone number, e-mail address, etc.), ** pass the verification (generally 24 hours later), and then complete the registration according to the above process (the content and steps to fill in the online reporting system again are the same as above).

3.After filling in the relevant information, the system generates an electronic copy of the "Professional and Technical Personnel Qualification Examination Registration Certificate Notification and Commitment System Application Commitment", which is signed and submitted by the applicant himself (no commitment is allowed). The electronic copy of the letter of commitment can be saved.

4.Carefully check the registration information again, and after confirming that the information filled, selected and uploaded is accurate, then click "Confirm" or **Print the "Registration Form" (the printed "Registration Form" does not need to be reviewed and submitted by the unit, and is retained by the applicant for future reference).

5.After clicking "Confirm" or "Print the Registration Form", **pay the exam fee, and the successful payment will be considered as a successful registration. When paying the fee, you can use the same account to pay for multiple people one by one, but pay attention to the payment of the corresponding candidates one by one, so as to avoid wrong payment and missed payment.

If the applicant is disqualified from the examination after the test paper has been booked or has made a false promise, the paid fee will not be refunded.

2) Handling of special circumstances.

During the registration process, if there are any of the following special circumstances, they will be handled accordingly.

1.For those who have a college degree or above before 2002, a bachelor's degree or above before 2008, or a foreign (overseas) academic degree, etc., and cannot be verified, they must upload the corresponding academic degree certificate before they can continue to complete the above application process.

2.For candidates who have violated discipline in the qualification examination and are recorded in the integrity archive and are still within the record period, the notification and commitment system is not applicable, and they must contact our institute to make corresponding settings before continuing to complete the above application process (at the same time, the registration form must be printed and saved for on-site review after all the results are passed).

4.If the old candidates who have passed the test in the archive do not meet the application conditions, they will be treated as invalid as exam registration. If you do not meet the application requirements due to the number of years, the qualified subjects before the application year will be invalidated.

The first-level cost engineer examination adopts the national unified online registration mode, and the candidates log in to the online registration system of the national professional and technical personnel qualification examination registration service platform for registration. The cost engineer examination generally adopts online registration, online payment, qualification review and registration of the proof of notification and commitment system for registration, but some areas will still conduct on-site audits, and the specific situation is subject to the provincial examination announcement.

The registration time for the 2022 first-class cost engineer is September. The registration period is expected to be September 2022, and candidates can register for the exam if they meet the conditions. The 2022 Level 1 Cost Engineer Exam will be held in November 2022.

The first-level cost engineer examination lasts for 2 days and is divided into 4 exams, one in the morning and one in the afternoon.

Prospects for a Level 1 EstimatorEach project from the start to the completion of the budget staff is required to participate in the whole process, the start of the budget, the progress of the project appropriation and the completion of the project settlement work are required to budget the budget, and from the owner to the construction unit and the fair side of the cost consulting center has its own budget officer, it is obvious that the professional talent in the social demand is large, the scope of employment is very wide, and there are many employment opportunities.

In today's diversified project investment and advocating the cost management of the whole process of construction projects, there is no doubt that the role and status of cost engineers are becoming more and more important. Internationally, project owners in Commonwealth countries generally like to hire quantity surveyors to assist the owner in the whole process of project cost management, and the project cost engineer is generally called the cost manager by the owner.

The registration time for the 2022 first-class cost engineer exam starts in August, and the registration time for each province is as follows:

The results of the professional qualification examination for a cost engineer shall be implemented for a period of 4 years for a rolling management method, and the personnel who participate in the 4 subject examinations (the level of the examination of all subjects) shall pass all the examination subjects in 4 consecutive examination years.

Registration PeriodFrom 09:00 on August 31, 2022 to 18:00 on September 7, 2022Online payment timeAugust 31 to September 8, 2022.

Print the time of the admission ticketNovember 8 to November 13, 2022.

Exam time and subjectsNovember 12, 2022.

09:00-11:30 a.m. Construction project cost management.

14:00-16:30 p.m. Construction project valuation.

November 13, 2022.

09:00-11:30 a.m. Construction Engineering Technology and Metrology (4 majors) 14:00-18:00 p.m. Case study of construction project cost (4 majors).

The 2022 first-class cost engineering qualification examination will be held on November 12-13. The application conditions for the first-level cost engineer examination need to have a major in engineering cost, and the minimum academic requirement is a college (or higher vocational education) degreeThe working years are required to be engaged in engineering cost and project management business for 4 years.

Specific requirements for the first-level cost engineer examination:

Those who abide by national laws and regulations, have good political and professional quality and moral character, engage in engineering cost work and have one of the following conditions, can apply to participate in the professional qualification examination of a cost engineer:

A) to obtain a college degree (or higher vocational education) in engineering cost, engaged in engineering cost business for 5 years.

B) obtained through the professional assessment (certification) of engineering management, engineering cost professional bachelor's degree or degree, engaged in engineering cost business work for 4 years

C) obtained a master's degree or a second bachelor's degree in engineering, management, economics, engaged in engineering cost business for 3 years.

4) Obtain a doctorate degree in engineering, management and economics, and have been engaged in engineering cost business for 1 year.

E) to obtain other professional categories (categories) of the corresponding academic qualifications or degrees of personnel, engaged in engineering cost business work years increased by 1 year.

The 2022 first-level cost engineer examination time is November 12 to 13, 2022, and the examination subjects are construction project cost management, construction project valuation, construction engineering technology and measurement, and construction project cost case analysis.

The specific exam schedule is as follows:

November 12th.

9:00-11:30: Construction Project Cost Management

14:00-16:30: "Construction Project Valuation".

November 13th.

9:00-11:30: "Construction Engineering Technology and Metrology" (four directions) 14:00-18:00: "Case Analysis of Construction Engineering Cost" (four directions).

The 2022 first-class cost engineer exam will be held from November 12th to 13th.

Application conditions for first-class cost engineer:

In accordance with the requirements of the Notice of the Ministry of Human Resources and Social Security on Matters Concerning the Reduction or Cancellation of the Requirements for the Working Years of the Vocational Qualification Examination for Some Access Classes (No. 8 of 2022 issued by the Ministry of Human Resources and Social Security), from 2022, the requirements for the working years of the professional qualification examination for first-class cost engineers will be adjusted as follows:

1.Have a college degree (or higher vocational education) in engineering cost, and have been engaged in engineering cost and engineering management business for 4 years; He has a college degree (or higher vocational education) in civil engineering, water conservancy, equipment manufacturing, transportation, electronic information, finance and commerce, and has been engaged in engineering cost and engineering management business for 5 years.

2.Have a bachelor's degree or degree in engineering management that has passed the evaluation (certification) of engineering education major, and have been engaged in engineering cost and engineering management business for at least 3 years; Have a bachelor's degree or degree in engineering, management and economics, and have been engaged in engineering cost and engineering management business for 4 years.

3.Have a master's degree or a second bachelor's degree in engineering, management and economics, and have been engaged in engineering cost and engineering management for more than 2 years.

4.He has a doctorate degree in engineering, management and economics.

5.Personnel with corresponding academic qualifications or degrees in other majors shall be engaged in engineering cost and engineering management business for 1 year.

The registration time for the first-class cost engineer examination is generally around August each year, and the registration time of each province and city is slightly different, and the specific registration time is subject to the registration announcement issued by the local personnel examination network!!

First-level cost engineer (level for the examination of all subjects) application conditions

Those who abide by the Constitution, laws and regulations of the People's Republic of China, have good professional quality and moral character, and have one of the following conditions, can apply to participate in the professional qualification examination of a cost engineer:

1. Have a college degree (or higher vocational education) in engineering cost, and have been engaged in engineering cost business for 5 years; He has a college degree (or higher vocational education) in civil engineering, water conservancy, equipment manufacturing, transportation, electronic information, finance and commerce, and has been engaged in engineering cost business for 6 years.

2.Have a bachelor's degree or degree in engineering management and engineering cost that has passed the evaluation (certification) of engineering education, and have been engaged in engineering cost business for 4 years; Have a bachelor's degree or degree in engineering, management and economics, and have been engaged in engineering cost business for 5 years.

3.He has a master's degree or a second bachelor's degree in engineering, management and economics, and has been engaged in engineering cost business for 3 years.

4.He has a doctorate degree in engineering, management and economics, and has been engaged in engineering cost business for 1 year.

5.Personnel with corresponding academic qualifications or degrees in other majors shall be engaged in engineering cost business for 1 year.

Hello, glad to answer your questions! The 2021 first-class cost engineer examination is from October 30th to 31st, and the registration time is about mid-August.

Qualifications.

The registration time for Henan first-class cost engineer in 2022 is as follows:

Online registration time: 9:00 on August 31, 2022 to 17:00 on September 7, 2022. Candidates should complete the information confirmation and ** "2022 Class I Cost Engineer Professional Qualification Examination Registration Form" (hereinafter referred to as the "Qualification Examination Registration Form") during the registration period in duplicate for verification.

1.Payment time.

Candidates must pay the fee on time, and if they fail to pay the fee within the specified time, they will be deemed to have given up the exam automatically.

The registration time for the 2022 provincial first-level cost engineer examination is as follows:

The materials required for the registration and review of the first-level cost engineer are as follows:

1.The original and photocopy of the candidate's valid ID card;

2.The original and photocopy of the academic (degree) certificate;

3.Certificate of working years in the project cost business stamped by the unit;

4.Candidates who apply for exemption from some subjects must also provide the original and photocopy of the senior professional and technical qualification certificate and the letter of appointment.

Yunnan Province first-class constructor registration conditions, what majors do first-class constructors apply for?