How does the permanent magnet eddy current flexible transmission achieve energy saving?

By using the Qianyida permanent magnet eddy current flexible transmission device, the flow can be controlled instead of controlling the valve or baffle, and the flow can be controlled by the speed of the load side to achieve energy saving. This means that energy savings can be achieved without limiting the flow rate. Similarly, this technology can also start the device completely disconnected from the load, which means that the starting current of the motor is very low and the shock load of the load to the device start-up is reduced.

Simply put, it is highly efficient, and the closed system has no energy loss other than the loss of the system itself.

To give a simple example: for example, in an engine, the exhaust gas has a temperature, and the heat energy of the exhaust is lost in vain.

The way to save energy in the operation of the main drive system of CNC machine tools is mainly to reduce the no-load power and no-load rate of the main drive system of CNC machine tools and improve the cutting load rate. Vacuum hot water units are the use of water at low pressure (below atmospheric pressure.

The principle of low temperature boiling to produce steam and heat output through condensate heat exchange works on the principle of heat output. Mechanical transmission efficiency is the output power divided by the input power, which is less than 1, 1 minus the mechanical efficiency.

It is the loss of mechanical power, and the heating of mechanical transmission.

It is due to power loss.

Introduction: Anshan Qinyuan Energy-saving Equipment Manufacturing Co., Ltd. was established in 2006 and is the holding company of MagnaDrive Corporation in the United States. The company has now developed into a technology-based, professional and most promising growth enterprise with core technology, independent intellectual property rights, and global market potential.

The company's leading product, permanent magnet eddy current flexible transmission energy-saving device, has begun to be used in electric power, metallurgy, mining, petroleum, cement, chemical industry and other fields. The company's breakthrough magnetic technology integrates high-tech, energy-saving, environmental protection and low-carbon emissions, realizing a new revolution in the history of global transmission, providing enterprises with high-efficiency and low-energy solutions, which can enhance reliability, reduce maintenance costs and effectively realize the green energy saving of transmission technology while saving energy and realizing process control. In 2012, in order to expand the sales of products in China and accelerate the market share in China, Magna officially set up a subsidiary in Beijing - Magna (Beijing) Energy-saving Equipment.

Legal representative: Ma Qingdong Lu La.

Registered capital: 130 million RMB.

Industrial and commercial registration number: 210300005081673 enterprise type: limited liability Gongqing Niansi (natural person investment or holding) Company address: No. 704, Jianguo Avenue, Tiedong District, Anshan City, Liaoning Province.

Anshan Qinyuan Energy Saving Equipment Manufacturing Co., Ltd. is a limited liability company (natural person investment or holding) registered in Tiedong District, Anshan City, Liaoning Province on 2006-04-19, and its registered address is located at No. 704, Jianguo Avenue, Tiedong District, Anshan City, Liaoning Province.

Anshan Qinyuan energy-saving equipment manufacturing **** unified social letter ruler scale with the registration number is 912103027851456397, the enterprise legal person Ma Qingdong, the company is currently in a state of operation.

The business scope of Anshan Qinyuan energy-saving equipment manufacturing company is: the design and manufacture of high-voltage and low-voltage intelligent speed regulation energy-saving devices, compensation and filtering devices, electromagnetic speed regulation drive energy-saving devices, and the sales of permanent magnet speed regulation drive energy-saving devices; contract energy management, electrical engineering; Professional design and construction of lightning protection engineering (operating with qualification certificate); Software development and programming, automatic control system integration and general mechanical equipment product processing and manufacturing, metal products processing, motor remanufacturing; import and export of goods and technology; technology development and transfer; Housing rental. (For projects subject to approval in accordance with the law, business activities can only be carried out after approval by relevant departments.)

In Liaoning Province, the total registered capital of companies with similar business scope is 315.75 million yuan, and the main capital is concentrated in 14 enterprises with a scale of 10 million to 50 million and more than 50 million. Within the scope of this province, the registered capital of the current enterprise is general.

Confiscate corporate credit through codes.

Jigao General Electric **** is a limited liability company (wholly owned by natural persons) registered in Jilin Province on 2011-09-15, and its registered address is located at No. 277, Jianxin Road, Jilin Economic and Technological Development Zone, Jilin City.

Jigao General Electric's unified social credit ** registration number is 91220294578932461e, the enterprise legal person Liu Kaiping, the company is currently in a state of opening.

The business scope of Jigao General Electric is: high and low voltage indoor and outdoor vacuum circuit breakers and accessories, high and low voltage electrical complete sets of equipment and accessories, box-type substations, circuit breaker permanent magnet mechanism devices, bus bars and bus ducts, cable trays, instrumentation, auto parts and accessories, special equipment, general equipment manufacturing; mechanical and electrical engineering, electric power engineering, energy-saving engineering design and construction; electrical and mechanical technology development; R&D and production of permanent magnet eddy current flexible transmission devices and fluid couplings; energy-saving technology development and consulting; energy contracting; Sales of electrical machinery, Wujinjiaodian, auto parts, automobiles (excluding cars), steel, and electricity. (For projects subject to approval in accordance with the law, business activities can only be carried out after approval by relevant departments.)

In Jilin Province, the total registered capital of companies with similar business scope is 171359 million yuan, and the main capital is concentrated in 413 enterprises with a scale of 10 million to 50 million and 100 million to 10 million. Within the scope of this province, the registered capital of the current enterprise is excellent.

Jigao General Electric **** foreign investment 0 companies, with 1 branch.

Through corporate credit.

This company is quite rubbish, please keep your eyes open! 1. The product quality is not up to standard; 2. Disputes over contract arrears often occur, which can be checked; 3. Arrears of basic wages for employees; 4, Liu Kaiping has no integrity at all!

1> friction type torque overload protector, 2> permanent magnet magnetic coupling, the above parts have not been tried, the project I need to apply is the light load coupling on small automation equipment, I hope to achieve asynchronous connection, that is, the speed of the active shaft is not fixed in proportion to the speed of the passive shaft, and the speed ratio has been changing.

I currently use a simple method to achieve this, using a circular belt to connect the active and passive axes, and the belt is semi-relaxed, allowing the belt and pulley to slip when a certain torque is exceeded.

Hope it helps.

I don't know what kind of effect you are talking about flexible connections?

Magnetic couplings are also known as magnetic couplings and permanent magnet transmission devices. The permanent magnet eddy current current driving device is mainly composed of three parts: a copper rotor, a permanent magnet rotor and a controller. Generally, the copper rotor is connected to the motor shaft, the permanent magnet rotor is connected to the shaft of the working machine, and there is an air gap (called an air gap) between the copper rotor and the permanent magnet rotor, and there is no mechanical connection to transmit torque.

In this way, a soft (magnetic) connection is formed between the motor and the working machine, and the torque and speed of the working machine shaft are changed by adjusting the air gap. Due to the different ways of air gap adjustment, the permanent magnet eddy current dynamic device is divided into different types, such as standard type, delay type, moment limiting type, speed regulation type, etc.

Also known as magnetic coupling, permanent magnet transmission device.

Permanent magnet eddy current motion technology is not simply the use of the principle of homogeneous repulsion and opposite-sex attraction of magnets, it is the integration of transmission technology, material technology and manufacturing technology. 21st century manufacturing technology will not only continue to manufacture machines and equipment that operate under conventional conditions, but also will manufacture machinery and equipment that operate in extreme environments, and the products manufactured in the 21st century should be in line with energy saving and ecological environmental protection, and people-friendly green products, permanent magnet eddy current technology is to adapt to this development trend came into being. With the continuous emergence of new technologies, new processes and new structures, it will usher in a new stage in the development of permanent magnet eddy current motion technology.