ADSL can never be pulled out again after the cable is disconnected 20

Recently, there are always ADLS netizens who go online.

Application Exception Software Exception (0xc0000409) for Location Location 0x5fdda3c0"

situation. There is another kind of:

The generic host process for Win32 Services has encountered a problem and needs to be shut down. We apologize for any inconvenience this may cause. "

situation. These are two types of system errors caused by the two viruses, named "Magic Wave (" and "Magic Wave Variant B (virus" respectively.

The virus can be spread by exploiting the Microsoft MS06-040 high-risk vulnerability. When a user's computer is attacked by this virus, symptoms such as system service crash and inability to access the Internet will occur. Since the virus appeared only a few days after Microsoft released a patch, many users have not had time to update their systems.

The "Mobo" virus will automatically search the network for computers with system vulnerabilities, and directly boot these computers ** virus files and execute them. As long as these users' computers are not patched and connected to the Internet, they are at risk of being infected. Computers infected with the virus automatically connect to a specific channel on a specific IRC server, receiving remote control commands from hackers.

A user's bank card account number, password, and other private information can be stolen by hackers. Since the IRC server to which the virus is connected is in China, it is very likely that the virus is written for Chinese people.

Workaround: Go.

** Install after finishing - from the beginning, then update the antivirus software to the latest version. Mine is Rising, but I'm sure most antiviruses have been updated to block this virus.

You can install a firewall and try it, Skynet or something.

Alternatively, upgrade the Windows patch, KB921883

We also have a lot of this problem on our side.

You start with the line to check, hit ** to 10000 to confirm whether the connection status of your ADSL is good. Let's reset the ADSL connection.

Hello, there is a label on the back of your router, you look at the router gateway address and enter the IE browser to see if your broadband settings are normal, usually the routing power failure may cause the loss of the configuration file, you need to reset the new broadband dialing information.

Seeing your reply downstairs, you reset it yourself, right? Check whether the broadband cable connection is correct, the external network home line plugs into the WAN port, the computer LAN port, and the line is normal, you may also want to consider whether the broadband is bound by the operator. There are also reasons such as whether the router will be damaged.

If the network is disconnected abnormally, wait for 15 minutes and wait for the telecom to automatically reset before dialing up normally.

The abnormal shutdown caused by a sudden power failure will give the network server an error signal, it may be that the communication company server has closed your gateway port, ** to the manual station, just refresh it. I've been in this situation a few times, and it's been solved in this way.

Log in to the router, reset the dial-up account and password, and re-dial the number.

1. Local office problem, after the connection is disconnected, call ** to ask the customer service if there is a fault in the local end.

2. The problem of the cat, caused by the restart after the component is hot, is replaced and eliminated.

3. Computer problems, try another one or take a laptop tablet to try it, and eliminate terminal software problems.

4. The network cable is generally less than 90 meters can be effectively transmitted, and the poor quality of the line will affect the signal transmission. The 150-meter ** line is no problem. Therefore, the problem of the line can be ruled out, unless the **line is loose, and the wind blows, it will shake, try to see if there is a rustling sound in the busy sound.

If there is, it is a point of failure.

5. The separator is connected incorrectly, whether it is connected to the ADSL port, if it is connected wrongly, or if the separator is faulty, it will be disconnected. Disengage or replace the divider to exclude.

There are several general causes:

1. The port of ADSL is hung up and cannot be reset.

2. The modem hangs up.

The above treatment: turn off the modem, unplug the power cord and the ** cable at the same time, and unplug the key ** cable, and wait for 10 minutes to try again.

3. If there is a problem with the compatibility of the dialing software, reinstall it directly.

3. There is a problem with the line, and it is difficult to judge this situation, so it is recommended to call 10000 directly to report the fault, and someone will come to deal with it.

What appears**. It's 768, or it's 916, it's 619, you don't say I can't, there are so many reasons.