Xiaomi mobile phone how to flash without password

Take it directly to the place where the phone is repaired, and flash the phone directly.

After powering off, press the standby button and the tone button.

The method is actually quite simple, that is, when the Xiaomi phone enters the flash mode, you can clear the password we set.

The method is as follows: The first step is to let the phone enter the flash mode, there are two ways to enter the flash mode, one is to enter the system in the state of boot to complete! But we forgot our phone password lock!

So this method doesn't work, that's the second method! That is, when the Mi mobile phone is turned off, press and hold the "power button" + "volume +" button at the same time for about 3 seconds, and you can let go to the recovery flash mode interface.

The second step, when entering the flashing mode interface, select the Chinese Simplified mode (use the volume button to select up and down, use the power button to confirm, there is a prompt at the bottom of the interface).

The third step, enter the Chinese mode, press the volume down button to move to the second item "Clear Data", and press the power button to confirm. Enter the Clear Data interface.

Step 4: In the Clear Data interface, press the volume down button to move to the "Clear User Data" option, and press the power button to confirm. A prompt will come out saying that you are sure to clear the user data, and this operation cannot be restored to the cloud. Select Confirm.

In a few seconds or so, the user data will be cleared. At this time, we will return to the main menu interface and we can restart the phone. At this point, the password is cleared.

Precautions. Clearing the user's data in this way simply erases all of the user's settings. It will not clear the software we installed before, as well as files, and mobile phone numbers, so you can use this method with confidence.

However, all the previous settings have been restored to initialization. User settings need to be set again!

If the user sets a lot of settings, it will be time-consuming, in order to avoid the situation that the password is forgotten and cannot enter the system. I suggest that you should do some backup work on your phone regularly. Try to back up your phone when you don't have a password lock to prevent you from forgetting your password again and having to erase your data again.

These methods can be applied to all models and versions of Xiaomi phones. Other brands of mobile phones can also use this method, but the operation method is not quite the same, and you can search for the operation method of the corresponding model.

1. There are 2 ways to operate the Xiaomi mobile phone:

Method 1: Upgrade the card in the system. Card swiping is to use the miniSD card as a storage medium to store ROM files (mobile phone operating system files), and then use X1 itself to install ROM files with XX automatic installation of ROM files program.

Method 2: Upgrade via wire brush. Wire brush is a way to use the wire brush tool to connect the computer and mobile phone through the data cable, and flash the line brush firmware to the mobile phone.

It can be used to flash in the latest firmware to upgrade, and it can also fix problems such as the black screen and crash of the mobile phone caused by system or software failures.

2. The following steps of "card upgrade in the system", a total of 13 steps, are as follows:

1. Log in to Xiaomi's official MIUI forum, see the forum link on the right, and find the "Flashing Tutorial" page.

3. Choose your own phone model.

5. Send the zip package to the downloaded rom folder of your phone.

6. Go to "Settings - My Device" in your phone.

7. Select "MIUI Version".

8. Click the vertical ".. in the upper right corner".

9. Select "Manually select installation package".

10. Select the zip package prepared for the card brush.

11. Stand still and wait for the system to be automatically upgraded.

12. Restart.

If you forget the lock screen password of the mobile phone, you can only remove the lock screen password by forcing the reset, but the landlord needs to pay attention to the fact that personal information and applications will be deleted, first press and hold the power button, and then release the power button when the phone has a vibration prompt, and then press the volume key until an exclamation mark appears on the screen, and then release the volume key, and finally press the following key combinations in order, volume key, volume key, power key, volume key, and then you can complete the formatting of the phone, The lock screen password of the landlord's mobile phone can also be lifted.