What kind of water pipe joints are used for these two?

Twist it directly by hand until it can't be screwed, and if there is a 10-gauge open-end wrench, tighten it again. Introduction: Faucet is the popular name of the water valve, which is used to control the size of the water flow and has the effect of saving water.

The replacement speed of faucets is very fast, from the old-fashioned cast iron process to the electroplating knob type, and then to the stainless steel single-temperature single-control faucet, stainless steel dual-temperature double-control faucet, kitchen semi-automatic faucet. Nowadays, more and more consumers will consider the material, function, shape and other aspects of faucets. Classification:

1. According to the material, it can be divided into SUS304 stainless steel, cast iron, all-plastic, brass, zinc alloy material faucet, polymer composite material faucet and other categories. 2. According to the function, it can be divided into basins, bathtubs, showers, and kitchen sink faucets. 3. According to the structure, it can be divided into several faucets such as single-link, double-link and triple-type.

In addition, there are single and double handles. Single-connection can be connected to cold water pipe or hot water pipe; The duplex can be connected to two pipes at the same time, and is mostly used for bathroom basins and faucets for kitchen washing basins with hot water**; In addition to connecting two pipes of hot and cold water, the triple type can also be connected to the shower head, which is mainly used for the faucet of the bathtub. A single-handle faucet can adjust the temperature of hot and cold water with a single handle, while a double-handle faucet needs to adjust the temperature of the water by adjusting the cold water pipe and hot water pipe separately.

4. According to the opening method, it can be divided into spiral type, wrench type, lifting type and induction type. When the spiral handle is opened, it has to be rotated many times; The wrench-style handle generally only needs to be rotated 90 degrees; The lift-up handle only needs to be lifted up to dispense the water; Sensor-activated faucets will automatically dispense water as soon as you put your hand under the faucet. In addition, there is a kind of faucet that closes with a delay, and after turning off the switch, the water will flow for a few more seconds before stopping, so that the dirt on your hands can be flushed again when the faucet is turned off.

5. According to the valve core, it can be divided into rubber core (slow opening valve core), ceramic valve core (fast opening valve core) and stainless steel valve core. The most critical thing that affects the quality of a faucet is the valve spool. Most of the faucets that use rubber cores are cast iron faucets that open spirally, which have been basically eliminated now; Ceramic spool faucets have appeared in recent years, with better quality and are more common now; The stainless steel spool is a recent phenomenon and is more suitable for areas with poor water quality.

One is the faucet switch, with a 4-point pipe hoop, and the other is the bath nozzle tube, which can be matched by buying a nozzle.

Go to the hardware store and ask the boss and the boss will tell you.

The thing that connects the faucet to the water pipe is the angle valve.

Angle valves, also known as triangle valves, are usually used to connect water pipes and faucets to adjust the amount of water. Angle valves are divided into hot and cold valves, the same material, mainly use blue and red signs to distinguish cold and hot water, such as faucets, toilets, and hot water annihilators.

The role of the angle valve:

1. Adjust the amount of water to make the water output of the faucet more suitable for use.

2. In case the faucet needs to be repaired, it is not necessary to cut off the main valve, as long as the corresponding angle valve is closed.

3. It is an indispensable plumbing accessory for the decoration of new houses, and it can also play a decorative role.

<> should be the use of aluminum-plastic pipe accessories, the outer wire in the picture is direct, just use the two pieces at the back I think it is okay. Whether it's a four-point or a six-point, you can test it and then go out to buy a piece. Although the original pieces were plastic, it is now possible to use metal. FYI.

This kind of water pipe joint is called PP quick connector, which is a very convenient operation of the quick connection pipe fittings, which is often used in plumbing construction, which is very convenient.

We call this a "pipe lock", after inserting the aluminum-plastic pipe directly, and then tighten it with a lock hoop.

Reducer and reducer water pipe joints.

Although the role of water pipe joints is not a big effect, but with it, it will be much more convenient to use water, so we can see it in almost every household. So what exactly is a water pipe joint? I won't sell it anymore, and in the following article, I will give a comprehensive introduction to water pipe joints.

A joint is a component used to connect water pipes. Water pipe joints can be divided into male thread terminated water pipe joints, card mode water pipe joints, and self-fastening water pipe joints according to the way of use.

Male end-connection water pipe fittings are made of zinc alloy die-casting, and the surface is galvanized, frosted, or chrome-plated; The structure is compact, no pores, and the strength is high. The card mode water pipe fitting can connect the unthreaded steel pipe with the hose, eliminating the need for threading process, and only need to screw the screws in; The structure is compact and the strength is high. The self-fastening water pipe fitting can connect the unthreaded steel pipe or the unthreaded equipment outlet with the hose, eliminating the need for threading; It is made of zinc alloy material die-casting, and the surface is galvanized, frosted, or chrome plated; The structure is compact and the strength is high.

It is widely used in high-end buildings, hotels, hospitals, buildings, gymnasiums, museums, government agencies, villas, and residential communities.

Water Fittings**.

Water pipe joints have many uses, not only for domestic use, but also as car water guns. Because of the different ways of use and specifications and sizes, there are also differences, and we will briefly list several different joints for reference.

1. Aerospace Boyu HBY-060 car wash water gun water pipe joint, suitable for the inner diameter of the water pipe.

2. Canon universal faucet joint, suitable for the inner diameter of water pipe.

3. C53 washing machine water connector, suitable for the inner diameter of the water pipe.

The above is the introduction of water pipe joints. Have you ever noticed this little water pipe joint? If the water pipe joint is leaking, don't worry, generally hardware stores have water pipe joints of various sizes for sale.

There are the following reasons for having an extra joint when connecting the water to make a code pipe:

1. Easy to connect and disassemble: The joints connected by the water pipe can be easily connected and disassembled, so that it is more convenient and faster when the connection mode needs to be changed or the water pipe needs to be replaced. If there is only one fitting, then each time the water pipe is replaced or disassembled, it takes a lot of force and time, and it is not flexible enough.

2. Prevent water leakage: one more joint can increase the tightness of the connection and reduce the risk of water leakage. If there is only one joint, once the joint is not well sealed or damaged, it is easy to cause water leakage.

An additional fitting provides an additional layer of sealing, increasing the robustness of the water pipe connection.

3. Increase the length of the connection: one more joint can increase the length of the connection, so that the water pipe can be extended or bent more flexibly. In some cases, where it is necessary to connect the water pipes to a distant place or to arrange the water pipes along a complex path, an additional fitting can provide more connection space to accommodate different usage needs.

Summary. Dear, I am glad to answer for you: what is a water pipe that only allows a few joints?

Answer: Generally speaking, there can only be one connector within 10 meters of the wire pipe, and there are 4 openings on the top of a water pipe joint. These 4 openings can be connected to any place where the water pipe is the water supply pipe, the modern decoration water pipe is the use of buried wall construction, there are three kinds of classification of water pipes, the first type is metal pipes, such as hot-dip cast iron pipes, copper pipes, stainless steel pipes, etc.

Dear, I am glad to answer for you: what is a Kaiju water pipe only allowed a few joints? Reply to Sun this:

Generally speaking, there can only be one joint within 10 meters of the electric pipe, and there are 4 openings on the top of a water pipe joint. These 4 openings can be connected to any place water pipe is the water supply pipe, modern decoration water pipe is the use of buried wall construction, the classification of water pipe has three kinds of slippery, the first type is metal pipe, such as the hot-dip cast iron pipe of the inner plastic pipe, copper pipe, stainless steel pipe, etc.

What is the diameter of the pipe, and how many faucets can there be?

Generally, 32 are directly connected to 10 heads.

For example, 32, 25, 16.

8 pieces of 25 and 4 pieces of 16. 32 out of 10.