How to do the sub control of Zhongwei monitoring, how to not record the digital monitoring system

Install the sub-controller program in the drive disk, mark the channel in the network settings of the host, apply for a global access number, and then fill in the global access number in the system settings on the extension.

I don't know what your structure is! The sub-control referred to is controlled by there and there! There's a global feature in it! It's used to deal with dynamic IP! But it seems like there's an extra charge!

Workaround:

a) Please make sure you are using the latest software version of Zhongwei.

b) Confirm that scheduled recording is enabled and adjust the recording time by yourself. If the automatic recording time in the default state is 24 hours, there is no need to adjust it. If you change it to 00:

00 - 23:59 points, then change the value back to 00:00 - 00:

00 。It is recommended that the customer directly open the [Full Open] button for recording the channel of the main control software. The same is that it will be recorded for 24 hours, and it will still be recorded automatically after restarting the software.

c) (as shown in Figure 31) Please try not to use the Ghost system version of XP, although the Ghost system version is very fast to install, but it cannot guarantee the stability of the system. Monitoring the operation of the system requires a stable system environment.

It would be nice to change the video path.

Let's redo the recording settings.

Hello, glad to answer for you :

Solution: 1. Open the main control, click Advanced Functions, click System Profile, and click Restore System Default.

2. Check whether the software version matches the capture card.

3. Installation of Zhongwei Century.

The latest software version of the digital monitoring system.

4. Ping the IP address of the main control to see if it can be passed, if the ping is not working, check whether the router does not set the port mapping and DMZ host.

5. Check the network environment, whether it is a Tietong network, wireless network, and cross-network remote connection.

On the monitoring host, set the port of the subcontroller. Then turn on the IE browsing function.

Did you use a router? Or is it a direct broadband connection??

It was not transmitted by a global signal.

Zhongwei digital monitoring system (JDVR) is Zhongwei Century company according to the characteristics of the security industry and many years of construction experience independent research and development of security monitoring software, set sound data real-time collection and compression, linkage alarm, auxiliary equipment control, network remote control is equal to one, data compression algorithm, the whole system has clear sound and picture quality, hard disk recording time, stable performance, flexible settings and other characteristics, can be widely used in banks, electricity, schools, intelligent communities, hospitals, factories, Armed Police Force and most other areas.