How to set the electric mule High ID for TP LINK router model TL WR840N, thank you!

1. Enter the Tengda router management IP in the computer browser, which is default.

2. On the login interface of the Tengda router that pops up, enter the password of the Tengda router and click "OK" to log in. The default password is admin.

3. After logging in, on the window interface, click the "Advanced Settings" option for advanced settings.

4. In the router settings window, click the "Internet Settings" option and select the Internet access method, enter the relevant information, and click "OK".

5. In order to prevent others from using the default settings of Tengda router to occupy the network, click on the LAN port settings to modify the LAN IP.

6. Return to the home page, set the wifi password of the Tengda router, and click "OK" to complete the router settings.

7. After the Tengda router is set up, use a laptop or mobile phone to connect to the Tengda router to check the connection to the Internet.

1. Open the browser, clear the address bar, enter, and press Enter.

2. Set the administrator password in the Set Password box, enter it again in Confirm Password, and click Confirm.

3. After logging in to the management interface, the router will automatically detect the Internet access mode (if it is not the first time to log in, click the Setup Wizard in the lower left corner of Advanced Settings), as follows:

4. Enter the broadband service provider in the broadband field, and fill in the corresponding broadband password.

5. Set the wireless name and password, the wireless name is not recommended to set Chinese or special characters. As shown below:

6. After the setup is complete, click Confirm, and the setup wizard is complete.

7. The setup wizard is completed, enter the main interface of router management, observe the status bar, if the Internet Settings is displayed as follows, it means that the network connection is successful.

First of all, I don't know your current office network topology, here use the original router to connect to the public network, and the new router to connect the old router to give you the answer:

Connect the TL-WE840N to the LAN port of the original router through the WAN port.

Set the WAN port of the TL-WE840N, set the WAN port IP of the core router according to the specific situation of the original router (choose dynamic acquisition or static designation according to the specific situation, this mainly depends on whether your old router has DHCP service enabled), and fill in the DNS according to the obtained public network information.

The IP conflict occurs because your IP uses the same network number, and the solution can be as follows: use the access to the first-level router, and use the access to the second-level router.

The routing IP address can be set to a pool.

It should work.

Here's how:

1. Connect the computer to the router;

2. Enter the router setting interface, set the router WAN port to static IP, and enter the assigned IP address;

3. Set the LAN port address so that it does not conflict with the primary route or other devices (for example, the primary route can be set to the secondary route;

4. Connect the outgoing LAN port of the main router to the WAN port of this router and restart the router.

1. Connect to the TL-WR840N router.

2. Set the IP address of the computer.

3. Set up the TL-WR840N router.

4. Check whether the setting is successful.

1. Log in to the management interface, open a web browser, enter the management IP address of the TL-WR840N router in the address bar of the browser, press enter, enter the user name and password, and click the OK button.

2. Run the Setup Wizard, when you log in to the management interface of the TL-WR840NN router for the first time, the system will automatically run the Setup Wizard, if not, please click the Setup Wizard option in the left navigation menu to run.

3. Choose a way to access the Internet.

4. To configure the Internet account, please fill in the Internet account and Internet password according to the broadband user name and password provided by the ISP broadband operator, and click Next.

5. Wireless network settings, select Wireless Status to turn on, click to set SSID, SSID is the name of the wireless network.

6. Click Restart, and the Internet access parameter settings and wireless network configuration on the TL-WR840N router will take effect after the reboot of the TL-WR840N wireless router is completed.

You can do this by following these steps::

First, connect the broadband cable to any WAN port of the router, and confirm that the indicator light of the corresponding interface is shining or flashing normally.

After connecting the router to the phone, the login screen of the router will pop up. When it does not automatically pop up, you can open the router management address through the mobile phone browser, and in the management interface, you can set the administrator password;

After logging in to the interface, operate according to the prompts, detect the network, and set the Internet access parameters;

In the wireless settings page, you can modify the wireless name and wireless password, and set wireless parameters.

After completing the setup, the phone reconnects to the wireless signal, and if the Internet can be accessed normally, the router is set up.

And which kind of software sets the password.

How to set it up:

Step 5: Click Done and restart the router according to the prompts.

Here's how to set up your wireless router:

1. The broadband bus (the network cable from the cat) connects to the WAN port of the router.

2. Connect one end of the network cable to any LAN port of the router, and connect the other end to the computer, and start the computer and router equipment;

3. After starting the device, open the browser and enter the router address in the address bar (the reverse side of the router can be viewed) to enter the wireless router settings.

Interface. 4. An account and password for logging in to the router appear in the settings interface, and enter the default account admin

5. Set up step by step according to the setup wizard and select the Internet mode, usually ADSL users choose the first PPPoE, if you use other networks.

The service provider chooses the following two items according to the actual situation, and if you don't know how to choose, you can directly select the first item to automatically select it, which is convenient for the new.

Hand operation, click next after selection;

6. Enter the account and password applied for from the network service provider, and go directly to the next step after the input is completed;

7. Set the wifi password, try to make the alphanumeric combination more complicated and not easy to be rubbed off the network.

8. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.

The wireless router TP-LINK840N can be set up as follows:

1. Plug the network cable (bus) into the WAN port of the TP-Link wireless router, plug one end into any LAN port of the TP-Link wireless router and connect the computer network card at the other end, and turn on the power supply of the router.

3. Then enter admin, the default account name and password are the same (there is also a prompt for the original data on the back of the router) to confirm.

4. After entering the TP-Link wireless router setting interface, select the Internet access method according to the setup wizard (different broadband options are also different), and enter the Internet access account and password.

5. Save, continue to set the wireless key, and then you can surf the Internet normally.

6. If it is abnormal, you may wish to click the reset button of the TP-Link wireless router and set the router again.