How to set up IP broadband control for TP Link routers?

1. Enter "Wireless Settings" - "Host Status" to see all connected devices, the second case is the MAC of the device

2. Go to "IP and MAC Binding" -"ARP"."According to the MAC address, find the map table and click "Configuration" and click "Import All".

3. Find the "Add Entry" and fill in the MAC address of the device that is defeated.

4. In Static APR Settings, select Enable for APR binding

5. Go to "IP Bandwidth Control" - "Control Settings" and select "Enable IP Bandwidth Control".

6. Fill in the bandwidth setting value of the target device and click Save.

In addition to the existing transmission, switching, routing and other major core areas, Lianpu is vigorously expanding mobile Internet terminals, smart homes, network security and other fields, so do you know how to set up TP-Link ADSL wireless routing all-in-one machine? The following is how I have collected and sorted out the methods provided by you to set up the tp-linkadsl wireless routing all-in-one, I hope it will be helpful to you. Welcome to read and learn!

How to set up a TP-linkadsl wireless routing app

1] Open the browser, clear the address bar and enter part of the earlier all-in-one management address, and set the management password of the all-in-one machine in the pop-up login box (the password length is between 6-15 digits), the password will be used for the future management of the all-in-one machine (login interface), please keep it properly. As shown in the figure below.

Enter the set administrator password and click Login, as follows.

2] After entering the management interface of the all-in-one machine, click Setup Wizard and select ADSL Access (**line). Set the device to ADSL wireless routing mode and click Next.

For the connection type, we choose to select PPPoE (ADSL Virtual Dialing) as follows.

Note. If it is a dynamic static IP accessing method, please select the corresponding Internet access method from the list.

Enter the Internet access account and password provided by the broadband operator in the Username and Password, and click Next. As follows.

Precautions

76% of users can't access the Internet because they have entered the wrong username and password, please carefully check whether the broadband username and password entered are correct, pay attention to distinguish between Chinese and English input, the case of letters, and whether the suffix is fully entered. If you don't know it, check with your broadband operator.

4] Set the wireless signal name and password, click Next, as shown in the figure below.

Precautions

1> It is recommended to set the wireless name to a combination of letters and numbers, and try not to use Chinese and special characters to avoid some wireless terminals that do not support Chinese or special characters, resulting in no search or connection.

3> In order to ensure your network security and network stability, it is recommended to set a wireless password to prevent others from illegally accessing the network.

5] Next is the IPTV settings, if you have enabled the IPTV service, please check Enable IPTV function (otherwise, click Next directly and refer to step [6]). Then select an ITV port to connect to the set-top box (the default is the second LAN port), and enter the local PVC parameters for watching IPTV, if you are not sure, please consult the operator. This is shown in the figure below.

Note. If your IPTV set-top box supports wireless access, you need to check Use wireless network as IPTV port, and set the wireless network name and password for the set-top box connection.

6] After confirming that the parameters in the Parameter Summary are correct, click Save.

After the settings take effect, click Done.

When it is done, return to the main interface of the router, click Home, and check the Internet connection, if the IP address is not, it means that the setting is successful, as shown in the figure below.

Hello. Sort out your situation first, a 6m broadband, more than a dozen people (let's say 10 people), use a wireless router to divide, the router has a bandwidth limit function.

It turns out that there is no limit enabled, resulting in some **or** large households monopolizing bandwidth, and as a result, other people (mainly you) are very stuck in surfing the Internet, which is normal, and now you want to set a speed limit to set a certain amount of bandwidth for yourself to fight Warcraft.

You start by limiting everything to 600, only to find that this setting is almost useless, and then you start to solve the problem.

1. First understand the meaning of setting the range, for example, setting it to 600 means that the maximum bandwidth of 3 and 4 is 600, not the sum.

2. Then there is the question of whether to set up your own computer, according to your screenshot, this router is set to the maximum bandwidth, that is, how much is set, and the maximum allowable bandwidth of that computer is how much, so if you are not afraid of your computer stuck to others, you don't need to limit your computer at all.

3. Finally, how to fill in? Take 10 computers as an example, if everyone is open, except for you, the other 9 are all **, this is the limit, at this time to ensure that they occupy the maximum bandwidth that is limited to them, and the bandwidth left for you can still meet your requirements, the best way is to distribute it equally, divide 6m by 10, almost 600kpbs, (the upstairs is wrong, the unit of 6m is also pbs, do not need to divide by 8, the 768 unit after dividing by 8 should be kb, that is, what we usually see** How much kb of speed, the router is filled in kpbs instead of kb, if you are limited to 100, then others will not be able to get on, how to live the **speed of more than 10kb)

4、Calculate 600 and start filling it in,2No limit,Limit from all to 600 down,Up,According to my experience,** and the basic use of watching movies is downstream,Uplink is used to upload,Play games are more needed,So uplink first set to 200 to see,If they don't feel inconvenient, they don't need to change。

Try it after completion.,I'm using 10 computers to calculate.,Including your computer.,If the number of units is more, you can reduce it some.,Proportionally.,If you can't solve the problem, then ask questions.。

Hope it helps.

You don't need to set it.,It's okay to recognize it.,Why set this.。

The instructions are already very detailed.

Just take a good look at the manual.

1. Connect the line between the network cable, the router and the computer, and start the computer and the router equipment;

2. After starting the device, open the browser and enter it in the address bar to enter the wireless router settings interface. (If you can't get in, please look at the nameplate at the bottom of the router or the router instruction manual, the default settings of different models of routers are different.) ）

3. An account and password to log in to the router appear in the settings interface, enter the default account and password admin, or refer to the manual;

4. After successful login, select the interface of the setup wizard, which will automatically pop up by default;

5. After selecting the setup wizard, a window will pop up to explain that you can set the basic parameters of the router through the wizard, and click Next directly;

6. Set up step by step according to the setup wizard, select the Internet mode, usually ADSL users choose the first PPPoE, if you use other network service providers, select the following two according to the actual situation, if you don't know how to choose, directly select the first item to automatically select, convenient for novice operations, click next after selection;

7. Enter the password applied for from the network service provider, and go directly to the next step after the input is completed;

8. Set the wifi password, try to make the alphanumeric combination more complicated, and it is not easy to be rubbed off the network.

9. After entering correctly, it will prompt whether to restart the router, select Yes to confirm the restart of the router, and you can access the Internet normally after restarting the router.