Start reading the progress bar screen, the system starts to the progress bar screen and then the bla

Cause of the failure system First, try all of the following solutions.

The first type of system problem is to go back to the original or redo the system with one click.

The second type of software problem is to reinstall the software under it.

The third software virus residual file cleans up the memory.

Fourth, the software is incompatible with the software.

Fifth, the cache settings are not reasonable, and the cache is reset.

Sixth, the system is short of resources, and the memory is deleted and cleaned up.

The seventh type of virus, Trojan horse detection and killing virus.

Eighth, the hardware is overheating, the CPU is too hot, and the heatsink is too dusty.

The ninth hard drive problem is to clean up the disk. Defragment the disk.

The tenth type of hardware quality hardware should be jumped.

The eleventh type of hardware overclocking is to de-energize the battery.

The twelfth type of hardware environment is re-seated.

Only lift the arch solution. No explanation is given.

1: To boot the computer, restore the BIOS to its factory state. (Battery de-energized) is more critical and must be done.

2: You copy the following command or in. Command Prompt Input:

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

regsvr32 /s

3: Update the graphics card driver. Restart your computer. Do a comprehensive antivirus.

Then do the following four points faster on the computer.

The first is to close all startup items. (msconfig) in Run (tick) ctfmon

and anti-virus software.

The second is to empty the ** station. The system needs to clear IE temporary files and records. Delete your own use.

Patch files. Third, set up a firewall. Right-click on properties on my computer. Point System Restore. (tick).

Fourth, turn off System Restore on all drives. Turn off automatic updates. Open the Advanced System Properties dialog box, click Settings in the Startup and Recovery area on the Advanced tab of the System Properties dialog box, and uncheck Auto Restart in the Startup and Recovery dialog box.

In the Advanced tab, click the dot Error Reporting and the dot Disable Error Reporting

In this case, the CPU should be loose, just take the CPU off and plug it back in, by the way, also wipe the memory stick, unplug it and erase it with an eraser, and re-plug the hard disk cable, if it doesn't work, I will contact again, good luck!

See if the driver is good, your wiring method is fine, if the driver is good, enter the system and then look at the device manager, or drag a window to see if there is a wave, if there is a driver is not played, if there is a problem with the graphics card! It's that simple! Good luck!

If there is a problem loading the graphics card driver, it is recommended to reproduce the installation system, and the problem will be solved.

Remember to change to another version of the system, the original system may not have a complete driver or something.

The boot has not yet entered the scroll bar. Keep pressing F8 to select VGA mode, then adjust the resolution to the point where you can see it correctly, and then reboot into normal mode.

The black screen after the blurred screen is a graphics card problem, have you recently updated the graphics card driver or other hardware drivers, and then caused conflicts?

If your graphics card has a fan, clean up the dust around the fan, and get around the capacitor, then go to safe mode, delete the graphics card driver, and then enter normal mode to see.

Come by yourself or ask someone to do the internal maintenance of the case. I do it for others and I get thirty.

Remove the dust and replug the hardware inside one by one.

It is generally caused by dust, clean it. Memory and graphics card reinserted.

Blurred screen is a problem with the system, driver, graphics card, or motherboard.

Hardware reasons: It may be caused by false connection or open welding;

Software causes: It may also be caused by the operating system or drivers. After redoing the system, install the driver, if the phenomenon is not resolved, it is due to hardware reasons, and it is recommended to send it for repair.

The sound is due to the eccentricity of the fan or dust, it is recommended

Clean the dust inside the chassis and all fan blades, add lubricating oil to the fan shaft or replace it with a new silent fan.

1. It is recommended that users use the latest version of anti-virus software to check whether there is any virus in the system 2. Reinstall the correct operating system. And install the drivers of each device correctly3, use the disk scanner to detect whether the hard disk is faulty. If so, dispatch.

Faulty parts: hard disk 4, dispatch. Faulty parts:

Memory, motherboard.

1. Use the latest version of anti-virus software to kill viruses;

2. At the command prompt, run"chkdsk /f /r"The command checks and fixes file errors.

3. If it is not the latest system patch package, please upgrade the latest system patch package 4. If the above operation is invalid, it is recommended to repair and install or reinstall the system.

5. Hardware testing, focusing on memory, followed by the motherboard.

In addition, do you freeze when playing games or running your computer? If there is, it is likely that there is a problem with the power supply!

If not: If you use an integrated graphics card, then you can try it with a discrete graphics card, if you still spend it. It must be something wrong with other hardware, either the motherboard or the power supply is unstable!

If you're using a discrete graphics card, either switch to another discrete graphics card or try it out with a graphics card integrated into the motherboard. No problem is definitely a problem with your own graphics card, or it is a power supply problem. 、

At this time, it is highly recommended to send it for repair! Or replace the power supply!

The problem with the graphics card is relatively big, please reseat the graphics card to see if the problem is solved, if it can't be solved, try to replace the graphics card driver, and no one can be asked to repair it.

A discrete graphics card is a problem with the graphics card, and an integrated graphics card is a problem with memory.

Memory, graphics card, reinstall it, it should be fine.

Reinstall the graphics card driver and take a look.

I think it's a graphics card issue, is your graphics card an integrated or discrete graphics card, is it because of the incompatibility between the motherboard and the graphics card!

1.Driver issues with the graphics card.

2.There is a problem with the connection between the computer monitor and the console.

3.Hardware issues, such as graphics card issues.

It is estimated that there is a problem with the graphics card, so try to reinstall the graphics card driver.

The preliminary estimate is a problem with the graphics card or memory, you can buy a memory first and replace the original one to see if the machine is good. If it's not good, then go buy a graphics card, so if it's a problem with the graphics card, you can also expand the memory, isn't it!

The graphics card is not working, you can find a new one and try it out!!

Like the graphics card mentioned above, it is possible, but I think the power supply is a bit more problematic.