What is the price of making plastic hanger injection molding machine

If you make half of the HIPS hangers can be produced with an injection molding machine, because the product is larger, it needs a clamping force of more than 350 tons, and the injection molding machine is relatively average, and the technology is relatively mature, about 350,000. If it is a hanger made of pp material, it is about 400,000 yuan, and the machine of 400,000 yuan can be used with two materials.

Plastic injection molding machines are very expensive, about ** in about 10w!

If you make half of the HIPS hangers, you can use the injection molding machine to produce, because the product is larger, so the clamping force is more than 350 tons, the injection molding machine is more average, and the technology is more mature.

The diameter of the washbasin is about 400mm, and it is necessary to choose a DKM450T injection molding machine. **Depends on what machine you choose.

Look at the brand, there are Haitian, Zhongwei, Dongfang, Deya... Different brands**different, Haitian is the best quality, **highest brand! It is recommended to buy old machines, a financial crisis has collapsed a lot of plastic factories, you can go to Shandong to see, to see your products It is recommended to buy two, one 1000 grams to produce kegs and basins, and the other 160 to produce cups and bowls, if it is a large barrel, it is best to buy 1500 grams, the old machine ** 160 grams in about 40,000, 1000 grams in about 120,000, 1500 grams in about 180,000, specifically ** look at the brand and the interior and appearance of the chassis.

1: The injection molding machine depends on the model, and Haitian's 200-gram one costs 100,000 yuan. You can buy a second-hand injection molding machine, and it will be very cheap.

2: The cost of opening the mold is about 5000, you can go to negotiate by yourself.

Hello friends, you are asking whether it is a vertical small injection molding machine, or a horizontal large injection molding machine, the vertical injection molding machine is relatively cheaper, and the horizontal injection molding machine is much more expensive, because the function is different. The vertical injection molding machine I bought in Lixin in the past has been doing very well now.

Domestic Haitian and Zhenxiong are okay.

As long as it is an injection molding machine, it will do.

You can use the cheapest one, and the sea characters below the sea and sky are quite cheap! Enough is enough.

Haitian, we can take you to a customer who manufactures hangers.

What tonnage. Where are you?

It is produced by injection molding machine.

1. The special injection molding machine for plastic hangers is a standard injection molding machine developed by itself after digestion and absorption combined with national conditions, which has the advantages of environmental protection, energy saving and high production efficiency.

2. The plastic hanger is mainly made of ABS plastic, and the shape of the plastic hanger is mainly divided into two categories, one is a flat and long frame body, as well as a relatively narrow shoulder cross-section, and the shelf slope is small, and its shape is light and thin, which is more suitable for drying light clothes. The other type is the opposite of the former, with a wider and shorter frame. The slope of the two shoulders is large and the width is thicker, and the shape is thick, which is more suitable for hanging heavier clothes.

Plastic hangers are injection molded, with injection molding machines, the size of the machine depends on the size of the hanger, if the hanger is larger, it will be a larger machine, generally 150t (refers to the clamping force) of the machine is about the same. No matter what brand of injection molding machine can be produced.

Injection molding machine, Haitian, Chen Hsong.

Haitian injection molding machine PL160T--PL200T can be 13637599655 Haikou Haitian Liu Gong.

Dude, I suggest you don't buy that brand of injection molding machine, garbage! It is better to buy a second-hand Taiwanese machine than to be cheap.

Personal use after the point of view, reference, seek truth from facts. Definitely not to.

It depends on how big your product is and how many molds you have.

About 100,000 injection molding machines. What plastic parts are processed. Did you open the mold? I can do it on my side.